What mounting positions are supported by the Mechanical Lever Pneumatic Diverter Valve with Tilt Roller, 5/2, Series 70 for reliable operation under 10 bar?

Mechanical Lever Pneumatic Diverter Valve with Tilt Roller, 5/2, Series 70 — Supported mounting positions for reliable operation under 10 bar The valve is designed for universal mounting and can be installed in any orientation (horizontal, vertical, inverted, or at any angle) while maintaining reliable operation up to 10 bar. Its compact aluminium body, robust nickel‑plated aluminium slider, NBR seals and ergonomic lever with pivot roller ensure consistent performance and tightness across all mounting positions within the specified temperature and pressure ranges.

Can the Mechanical Lever Pneumatic Diverter Valve with Tilt Roller, 5/2, Series 70 be used safely at temperatures below -10°C or above +60°C, and what precautions are required?

Mechanical Lever Pneumatic Diverter Valve with Tilt Roller, 5/2, Series 70 is specified to operate within a temperature range of -10°C to +60°C. Using it below -10°C or above +60°C is therefore outside the manufacturer’s rated limits and is not recommended without additional precautions. Risks of operating outside the range include seal hardening or leakage (NBR seals become rigid at low temperatures), lubricant thickening, altered material properties (plastics and nickel-plated/aluminum parts may become brittle or expand), slower or unreliable actuation, and potential loss of pressure rating or premature wear. Precautions if operation outside rated range is unavoidable: - Low temperatures ( +60°C): - Verify all materials (end cover plastic, seals, lubricants) are rated for higher temperatures; replace with high-temperature alternatives if available. - Provide thermal shielding or cooling and avoid direct exposure to heat sources. - Conduct high-temperature endurance testing to confirm performance and leak-tightness. - General: - Consult the manufacturer for approved modifications, alternative seal/lubricant options, and warranty implications. - Monitor the valve more frequently for leaks, wear, and performance changes if used outside spec. - Consider selecting a valve explicitly rated for the intended extreme temperature range for long-term safety and reliability.

Valve directional pneumatic Controlled mechanical a lever with a tilting roller, 5/2, series 70

All products, Pneumatic valves/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10

A universal valve directional o control mechanical, a lever with a tilting roller, used most often for control operation actuators. can be mounted in any position. Function 5/2 – five-way, two-position. Size: 1/8″. Material: body valve – aluminum, spool – aluminum nickel-plated, sealing – NBR, Cover end – plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-7001000610	Valve 70 series MEV 25 URS OO	-	10	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A universal valve directional o control mechanical, a lever with a tilting roller, used most often for control operation actuators. can be mounted in any position. Function 5/2 – five-way, two-position. Size: 1/8″. Material: body valve – aluminum, spool – aluminum nickel-plated, sealing – NBR, Cover end – plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.