Hose for substances highly flammable DYNAMIC® SAFE-TECH
The highest quality hose suction-delivery „FULL OHM” completely antistatic (Ω/T), intended for conveying substances highly flammable and very aggressive chemical. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), antistatic (R 6 Ω), mirror smooth, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic and spiral with wire steel. outer Layer type MARBLE (marbled), smooth, coated polyethylene (UPE), antistatic (R 6 Ω), meeting requirements FDA, free of odour and taste, resistant to abrasion, ozone and aging, chemicals and short-term action aggressive acids. advantage layer MARBLE is also low factor friction – hose slides and not soils surface with which is in contact, is easy for cleaning. excellent resistance chemical PFA and properties antistatic both layer internal as and outer (R 6 Ω) and in across wall hose (R 9 Ω) make, that hose is costly, ale technically ideal solution for applications demanding highest safety, we all zones hazard explosion (ATEX). used in industry chemical, petrochemical, pharmaceutical and cosmetic, a also in biotechnology. Not is intended for sterilization in autoclave. On special order Available version with additional built-in cables copper (M/T). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP CLASS VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, not cytotoxic (ISO 10993 Part 5); Outer layer: FDA 21 CFR 177.1520. Contains no plasticisers, phthalates or substances of animal origin. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: black polymer PFA. Reinforcement: cord synthetic, steel spiral. Outer layer: white-black polyethylene UPE, synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -35°C up to +130°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
The highest quality hose suction-delivery „FULL OHM” completely antistatic (Ω/T), intended for conveying substances highly flammable and very aggressive chemical. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), antistatic (R 6 Ω), mirror smooth, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic and spiral with wire steel. outer Layer type MARBLE (marbled), smooth, coated polyethylene (UPE), antistatic (R 6 Ω), meeting requirements FDA, free of odour and taste, resistant to abrasion, ozone and aging, chemicals and short-term action aggressive acids. advantage layer MARBLE is also low factor friction – hose slides and not soils surface with which is in contact, is easy for cleaning. excellent resistance chemical PFA and properties antistatic both layer internal as and outer (R 6 Ω) and in across wall hose (R 9 Ω) make, that hose is costly, ale technically ideal solution for applications demanding highest safety, we all zones hazard explosion (ATEX). used in industry chemical, petrochemical, pharmaceutical and cosmetic, a also in biotechnology. Not is intended for sterilization in autoclave. On special order Available version with additional built-in cables copper (M/T). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP CLASS VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, not cytotoxic (ISO 10993 Part 5); Outer layer: FDA 21 CFR 177.1520. Contains no plasticisers, phthalates or substances of animal origin. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: black polymer PFA. Reinforcement: cord synthetic, steel spiral. Outer layer: white-black polyethylene UPE, synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -35°C up to +130°C.
Additional information
| Material | PFA/MFA/FEP – fluoropolymer |
|---|---|
| Maximum operating temperature [°C] | 130 |
| Minimum operating temperature [°C] | -35 |
| Vacuum resistance | yes |
| Standard length [m] | 20, 30, 60, 60/ 120 |
| Reinforcement | steel spiral, synthetic cover |















