Can FSS Fixed Flange End for Steam Hose EN 14473, Galvanized Steel withstand 18 bar at +210°C for saturated steam and which flange classes apply for other media?

FSS Fixed Flange End for Steam Hose EN 14473, Galvanized Steel Format is rated to withstand working pressures up to 18 bar at +210°C for saturated steam. For other media the permissible pressure is determined by the flange class used: the product is manufactured to EN 10092-1 in PN16 and PN40 classes and to ASA/ASME in 150 PSI and 300 PSI versions. Thus for non‑steam applications you should apply the corresponding pressure/temperature limits of the chosen flange class (e.g., PN40 rating for higher-pressure media). For precise selection under specific media, temperatures and service conditions, consult Tubes International to ensure compatibility and safety.

How do I select the correct FSS Fixed Flange End for Steam Hose EN 14473, Galvanized Steel flange class (PN16/PN40 or ASA 150/300) for non‑steam media and varying operating temperatures?

To select the correct FSS Fixed Flange End for Steam Hose EN 14473, Galvanized Steel for non‑steam media and varying temperatures, follow these steps: 1. Confirm flange standard and class compatibility with your mating flange (EN PN16 or PN40, or ASA 150 or 300). The permissible working pressure of the assembly equals the chosen flange class (e.g., PN40 or ASA 300) for non‑steam media. 2. Determine maximum operating temperature of your media. The fitting is rated for saturated steam up to +210°C at pressures up to 18 bar; for other media, ensure the flange class rating covers the pressure at your operating temperature using flange pressure–temperature tables for EN/ASME standards. 3. Check chemical compatibility with galvanized steel and the rubber hose materials (corrosion, swelling, degradation). If media are aggressive to galvanized coating or hose compound, consider alternative materials. 4. Choose size matching hose ID (available 1/2”–2”) and ensure corrugated tail and shell clamp system provide secure mechanical fit. 5. Verify installation requirements per EN 14423/DIN 2826 and ensure gasket type and bolt torque suit the flange class and media. 6. For marginal conditions (temperatures near limits, aggressive fluids, or higher pressures), consult Tubes International for material alternatives, exact pressure‑temperature ratings and final selection. Use FSS Fixed Flange End for Steam Hose EN 14473, Galvanized Steel Format that matches your flange class, operating pressure at temperature, size, and chemical compatibility.

FSS Fixed Flange End for Steam Hose EN 14473, Galvanized Steel

All products, Steam hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	30

FSS fittings with fixed flange are designed for secure connection of rubber steam hoses, featuring a corrugated tail and locking system for reliable installation with shell clamps in compliance with EN 14423 and DIN 2826 standards, available in sizes from 1/2” to 2”. Manufactured from durable galvanized steel, they ensure long-lasting resistance to demanding operating conditions. The flanges are produced according to European standards EN 10092-1 in PN16 and PN40 classes, as well as American ASA (ASME) standards in 150 PSI and 300 PSI versions, offering broad compatibility with international systems. These fittings are engineered to withstand working pressures up to 18 bar at +210°C for saturated steam, while for other applications the permissible pressure corresponds to the respective flange class, such as PN40. Their robust construction and precise standardization guarantee safety, reliability, and efficiency in steam installations, making them an excellent choice for industries requiring high performance and compliance with global norms. For tailored selection and optimal application, consultation with Tubes International ensures the best solution for specific operating conditions.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RS-FSA1-015-013-ST	FSS end with fixed collar ASA 1/2", hose 1/2", galvanized steel	12	18	In stock	Enquiry
RS-FSA1-020-019-ST	FSS end with fixed collar ASA 3/4", hose 3/4", galvanized steel	20	18	In stock	Enquiry
RS-FSA1-025-025-ST	FSS end with fixed collar ASA 1", hose 1", galvanized steel	25	18	In stock	Enquiry
RS-FSA1-032-032-ST	FSS end with fixed collar ASA 1.1/4", hose 1.1/4", galvanized steel	32	18	In stock	Enquiry
RS-FSA1-040-038-ST	FSS end with fixed collar ASA 1.1/2", hose 1.1/2", galvanized steel	38	18	In stock	Enquiry
RS-FSA1-050-050-ST	FSS end with fixed collar ASA 2", hose 2", galvanized steel	50	18	In stock	Enquiry
RS-FSA1-065-065-ST	FSS end with fixed collar ASA 2.1/2", hose 2.1/2", galvanized steel	65	18	In stock	Enquiry
RS-FSA1-080-075-ST	FSS end with fixed collar ASA 3", hose 3", galvanized steel	75	18	In stock	Enquiry
RS-FSA1-100-100-ST	FSS end with fixed collar ASA 4", hose 4", galvanized steel	100	18	In stock	Enquiry
RS-FSA3-015-013-ST	FSS end with fixed collar ASA 300 1/2", hose 1/2", galvanized steel	12	18	In stock	Enquiry
RS-FSA3-020-019-ST	FSS end with fixed collar ASA 300 3/4", hose 3/4", galvanized steel	20	18	In stock	Enquiry
RS-FSA3-025-025-ST	FSS end with fixed collar ASA 300 1", hose 1", galvanized steel	25	18	In stock	Enquiry
RS-FSA3-032-032-ST	FSS end with fixed collar ASA 300 1.1/4", hose 1.1/4", galvanized steel	32	18	In stock	Enquiry
RS-FSA3-040-038-ST	FSS end with fixed collar ASA 300 1.1/2", hose 1.1/2", galvanized steel	38	18	In stock	Enquiry
RS-FSA3-050-050-ST	FSS end with fixed collar ASA 300 2", hose 2", galvanized steel	50	18	In stock	Enquiry
RS-FSA3-065-065-ST	FSS end with fixed collar ASA 300 2.1/2", hose 2.1/2", galvanized steel	65	18	In stock	Enquiry
RS-FSA3-080-075-ST	FSS end with fixed collar ASA 300 3", hose 3", galvanized steel	75	18	In stock	Enquiry
RS-FSA3-100-100-ST	FSS end with fixed collar ASA 300 4", hose 4", galvanized steel	100	18	In stock	Enquiry
RS-FSS1-015-013-ST	FSS end with fixed collar DN15 PN40, hose 1/2", galvanized steel	12	18	In stock	Enquiry
RS-FSS1-020-019-ST	FSS end with fixed collar DN20 PN40, hose 3/4", galvanized steel	20	18	In stock	Enquiry
RS-FSS1-025-025-ST	FSS end with fixed collar DN25 PN40, hose 1", galvanized steel	25	18	In stock	Enquiry
RS-FSS1-032-032-ST	FSS end with fixed flange DN32 PN40, hose 1.1/4", galvanized steel	32	18	In stock	Enquiry
RS-FSS1-040-038-ST	FSS end with fixed flange DN40 PN40, hose 1.1/2", galvanized steel	38	18	In stock	Enquiry
RS-FSS1-050-050-ST	FSS end with fixed flange DN50 PN16, 2" hose, galvanized steel	50	18	In stock	Enquiry
RS-FSS1-065-065-ST	FSS end with fixed flange DN65 PN16, hose 2.1/2", galvanized steel	65	18	In stock	Enquiry
RS-FSS1-080-075-ST	FSS end with fixed flange DN80 PN16, 3" hose, galvanized steel	75	18	In stock	Enquiry
RS-FSS1-100-100-ST	FSS end with fixed flange DN100 PN16, 4" hose, galvanized steel	100	18	In stock	Enquiry
RS-FSS3-050-050-ST	FSS end with fixed flange DN50 PN40, 2" hose, galvanized steel	50	18	In stock	Enquiry
RS-FSS3-065-065-ST	FSS end with fixed flange DN65 PN40, hose 2.1/2", galvanized steel	65	18	In stock	Enquiry
RS-FSS3-080-075-ST	FSS end with fixed flange DN80 PN40, 3" hose, galvanized steel	75	18	In stock	Enquiry
RS-FSS3-100-100-ST	FSS end with fixed flange DN100 PN40, 4" hose, galvanized steel	100	18	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

FSS fittings with fixed flange are designed for secure connection of rubber steam hoses, featuring a corrugated tail and locking system for reliable installation with shell clamps in compliance with EN 14423 and DIN 2826 standards, available in sizes from 1/2” to 2”. Manufactured from durable galvanized steel, they ensure long-lasting resistance to demanding operating conditions. The flanges are produced according to European standards EN 10092-1 in PN16 and PN40 classes, as well as American ASA (ASME) standards in 150 PSI and 300 PSI versions, offering broad compatibility with international systems. These fittings are engineered to withstand working pressures up to 18 bar at +210°C for saturated steam, while for other applications the permissible pressure corresponds to the respective flange class, such as PN40. Their robust construction and precise standardization guarantee safety, reliability, and efficiency in steam installations, making them an excellent choice for industries requiring high performance and compliance with global norms. For tailored selection and optimal application, consultation with Tubes International ensures the best solution for specific operating conditions.