Hose for acids and bases, antistatic MANICHEM MARBLE
Strong hose suction – delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) – ensures discharge charges electrostatic also through wall hose, co allows on use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 12 bar to 16 bar – depending on the diameter hose. Operating temperature: od -35°C up to +100°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Strong hose suction – delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) – ensures discharge charges electrostatic also through wall hose, co allows on use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 12 bar to 16 bar – depending on the diameter hose. Operating temperature: od -35°C up to +100°C.
Additional information
| Material | UPE – polyethylene UPE |
|---|---|
| Maximum operating temperature [°C] | 100 |
| Minimum operating temperature [°C] | -35 |
| Vacuum resistance | yes |
| Standard length [m] | 10, 20, 40, 60/ 120 |
| Reinforcement | steel spiral, synthetic cover |















