Hose for paints, varnishes NR SPRAY

Additional information

Material

PA – polyamide

Maximum operating temperature [°C]

90

Minimum operating temperature [°C]

-20

Vacuum resistance

no

Standard length [m]

100, 152.5, 50

High quality rubber hose delivery manufactured in USA o layer internal made with resistant chemical polyamide (nylon). very smooth surface inner reduces losses flow and ensures ease cleaning. Reinforcement synthetic a braid textile ensures high resistance pressure and small deformation under pressure. smooth Layer outer with rubber synthetic, resistant to contact with chemicals and oil (RMA Class B – resistance medium). Dla hoses o diameter internal 1/4″ and 3/8″ Layer outer antistatic R 6 Ω. hose intended for applications industrial, in particular for solvents organic and substances petrochemical. good resistance polyamide on many solvents allows on use hose in industry paint, for conveying paints, varnishes, adhesives and resins. should always take into account resistance chemical and any problem electricity static. W particular antistatic hoses o diameters 1/4″ and 3/8″ are widely used as hoses for paints supply pressure Gun spray in workshops automotive, construction and industry. checking resistance chemical: table resistance chemical PA (selection initial), confirmation resistance and conditions use through Tubes International. assembly: should use fittings with spigot (“tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with polyamide. possible is use typical ends hydraulic. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly depending on pressure working hose clamps clamping, ferrules clamping or for greater diameters clamps shell. typical factory hoses for guns spray have often fittings bolted repeated use. Inner layer: polyamide (PA), without silicone. Reinforcement: textile braid single for 1/4″ and 3/8″, double od 1/2″. Outer layer: black synthetic rubber. Working pressure: 52 bar. Operating temperature: od -20°C up to +90°C.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
GY-NRSPRAY-06Hose NR SPRAY 6.4x12.7 mm652In stock0 €
Enquiry
GY-NRSPRAY-10Hose NR SPRAY 9.5x17.8 mm1052In stock0 €
Enquiry
GY-NRSPRAY-13Hose NR SPRAY 12.7x22.4 mm1252In stock0 €
Enquiry
GY-NRSPRAY-19Hose NR SPRAY 19.0x30.2 mm2052In stock0 €
Enquiry
GY-NRSPRAY-25Hose NR SPRAY 25.4x38.4 mm2552In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

High quality rubber hose delivery manufactured in USA o layer internal made with resistant chemical polyamide (nylon). very smooth surface inner reduces losses flow and ensures ease cleaning. Reinforcement synthetic a braid textile ensures high resistance pressure and small deformation under pressure. smooth Layer outer with rubber synthetic, resistant to contact with chemicals and oil (RMA Class B – resistance medium). Dla hoses o diameter internal 1/4″ and 3/8″ Layer outer antistatic R 6 Ω. hose intended for applications industrial, in particular for solvents organic and substances petrochemical. good resistance polyamide on many solvents allows on use hose in industry paint, for conveying paints, varnishes, adhesives and resins. should always take into account resistance chemical and any problem electricity static. W particular antistatic hoses o diameters 1/4″ and 3/8″ are widely used as hoses for paints supply pressure Gun spray in workshops automotive, construction and industry. checking resistance chemical: table resistance chemical PA (selection initial), confirmation resistance and conditions use through Tubes International. assembly: should use fittings with spigot (“tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with polyamide. possible is use typical ends hydraulic. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly depending on pressure working hose clamps clamping, ferrules clamping or for greater diameters clamps shell. typical factory hoses for guns spray have often fittings bolted repeated use. Inner layer: polyamide (PA), without silicone. Reinforcement: textile braid single for 1/4″ and 3/8″, double od 1/2″. Outer layer: black synthetic rubber. Working pressure: 52 bar. Operating temperature: od -20°C up to +90°C.

Additional information

Material

PA – polyamide

Maximum operating temperature [°C]

90

Minimum operating temperature [°C]

-20

Vacuum resistance

no

Standard length [m]

100, 152.5, 50

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?