0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Plug water quick coupling NiTO ORIGINAL 1" with fitting for hose, stainless steel AISI 316L
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          NiTO ORIGINAL 1" quick coupling plug for water, made of acid-resistant AISI 316L steel, with a hose tail. Valveless design. AISI 316L steel is characterised by high resistance to most organic acids and salt solutions, also at elevated temperatures. The product is approved for food contact, manufactured in Denmark. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Seal material: viton.
        • Plug quick coupling with a thread internal NPT, series TST 100.08, brass nickel-plated
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling plug with BSP female thread, without valve, used in industry for cooling injection molds and die-cast parts made of plastics and aluminum, for conveying hot oil. Series: TST 100.08. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C (NBR). Material: nickel-plated brass (connection, sleeve and plug), stainless steel (spring, ring, balls).
        • Plug quick coupling with a thread internal NPT, series TST 100.12, brass nickel-plated
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug of quick coupling with BSP female thread, without valve, used in industry for cooling injection moulds and die-cast parts made of plastics and aluminium, for transferring hot oil. Series: TST 100.12. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C (NBR). Material: nickel-plated brass (connection, sleeve and plug), stainless steel (spring, ring, balls).
        • Plug quick coupling with a thread internal NPT, series TST 100.08, brass nickel-plated
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling plug with NPT female thread, without valve, used in industry for cooling injection molds and die-cast parts made of plastics and aluminum, for conveying hot oil. Series: TST 100.08. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C (NBR). Material: nickel-plated brass (connector, sleeve and plug), stainless steel (spring, ring, balls).
        • Plug quick coupling with a thread internal NPT, series TST 100.12, brass nickel-plated
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling plug with NPT female thread, without valve, used in industry for cooling injection and casting molds for plastic and aluminium parts, for hot oil transfer. Series: TST 100.12. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C (NBR). Material: nickel-plated brass (connector, sleeve and plug), stainless steel (spring, ring, balls).
        • Plug quick coupling with fitting for hose PUSH-ON, series TST 100.08, brass nickel-plated
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling plug with PUSH-ON hose tail, without valve, used in industry for cooling injection and casting moulds for plastic and aluminium parts, for transferring hot oil. Series: TST 100.08. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C (NBR). Material: nickel-plated brass (connector, sleeve and plug), stainless steel (spring, ring, balls).
        • Plug quick coupling with fitting for hose PUSH-ON, series TST 100.12, brass nickel-plated
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling plug with PUSH-ON hose tail, without valve, used in industry for cooling injection molds and die-cast parts made of plastics and aluminum, for conveying hot oil. Series: TST 100.12. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C (NBR). Material: nickel-plated brass (connection, sleeve and plug), stainless steel (spring, ring, balls).
        • High-quality composite hose for aviation fuels AERO STAR SG, SS, AA
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available exclusively as ready-made hose assemblies with fittings crimped by Tubes International. To receive an individual offer, please use the inquiry form in the shop or download the hose selection form (available as an attachment), fill it in and send it to: sklep@tubes-international.com High-quality composite hose for transferring special aviation fuels, jet engine fuels (JET A-1 and JP-6), jet engine biofuels, synthetic fuels (SPK - Synthetic Paraffinic Kerosene) and aviation turbine fuels (ATF - Aviation Turbine Fuel, also abbreviated as avtur). Characterised by high chemical resistance and strong construction. Safety factor 4:1 (HD - Heavy Duty version - 5:1). AA version (aluminium inner and outer helix) with significantly reduced weight, making the hose easier to handle. Application: transfer systems, filling and emptying equipment (UNO), unloading and loading of road and rail tankers, industrial installations, permanent equipment of road tankers. Standards: meets the requirements of EN 13765:2018 (type 3), compliant with Australian standards AS 2683 and with NAHAD recommendations (NAHAD 600/2005). Assembly: supplied as ready-made hose assemblies with fittings. Available versions: SG (stainless steel AISI 316 / galvanised steel), SS (stainless steel AISI 316 / stainless steel AISI 316), AA (aluminium / aluminium) – differing in the material of the inner and outer helix. Inner layer: polyamide (fabric layer, film). Reinforcement: inner / outer helix; polypropylene (fabric layers). Cover: abrasion- and weather-resistant fabric coated with PVC. Operating temperature: from -40°C to +100°C.
        • Biopharmaceutical hose for analytical micropumps PHARMED® BPT MICROBORE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-quality, flexible, cream-coloured hose, designed specifically for the pharmaceutical industry, biotechnology and laboratories. Has high fatigue resistance, exceptionally long service life when operating in a peristaltic pump, and good resistance to spallation (chipping of micro-particles of hose material caused by pressure from the pump rotor). It is also characterized by relatively low permeability to gaseous media, low absorption of transferred products, and good resistance to acids, bases and oxidation. The opaque hose wall protects sensitive products from UV radiation. The MICROBORE version of the PHARMED® BPT hose is an ideal solution for analytical micropumps where biocompatibility and high service life in pump operation (1000 h and more) are required. Biocompatible – non-toxic and non-haemolytic, meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.2.9. Hygienic properties confirmed by the Saint-Gobain validation guide for this hose. Compliant with REACH 1907/2006/EU and RoHS 2011/65/EU regulations – contains no hazardous or banned substances. Can be repeatedly steam-sterilized (30 min, 1 bar, +121°C, up to 5 times without affecting the hose's service life). Sterilization with ethylene oxide or radiation (up to 5.0 Mrad - 50 KGray) is also possible. The hose is available in versions with 2 or 3 stops or without stops. The coloured stops are phthalate-free and made using bioplasticizers. The combination of stop colours allows the hose size to be identified. Hose length with 2 or 3 stops: 381 mm. Distance between stops: 152 mm. Versions with stops are sold in full packs of 6 pieces. Depending on stock availability, minimum order quantities (MOQ) may apply – from 30 to 240 pcs. of hose. Hose length without stops: 3 m. Depending on stock availability, minimum order quantities (MOQ) of 15 or 99 m may apply. Material: TPE (thermoplastic elastomer). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 64 Shore (A). Density: 0.98 g/cm³.
        • Hose for concrete SHANNON/80 HD®
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for concrete SHANNON/80 HD®

          All products | Bulk material transfer hoses
          0 €
          Hoses are available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Strong steel cord reinforced hose for pouring concrete on construction sites. Used as the final flexible section of the articulated pipeline of a mobile pump. Inner layer made of rubber with good resistance to abrasion from wet concrete. Multiple steel cord reinforcement provides high pressure resistance. Also withstands vacuum during cleaning. Outer layer resistant to abrasion, weather conditions and ozone. SHANNON 85 ® hose is available as complete hose assemblies fitted at one or both ends with special grooved couplings for concrete hoses, in sizes and lengths specified by the customer. Inner layer: black SBR/NR rubber. Reinforcement: 4 ÷ 6 layers of steel cord - depending on hose diameter. Outer layer: black SBR/NR compound. Working pressure: 85 bar. Working temperature: from -40°C to +70°C.
        • Coolant hose HYDRAFIX FR201
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coolant hose HYDRAFIX FR201

          Air and water hoses | All products
          0 €
          Hose intended for low-pressure conveying of air, water, oils and other substances used in cooling processes during metalworking. Its special construction provides shape memory, allowing precise direction of the coolant stream. Supplied as ready-made hose assemblies with a BSP male threaded connection and a nozzle at the other end. Material: black PVC. Reinforcement: steel guide cover, with an additional spiral cover made of nickel-plated sheet steel up to DN 10. Working pressure: 4 bar. Working temperature: up to +80°C.
        • Hose for cleaning sewers and pipes IK 25
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for cleaning sewers and pipes IK 25

          All products | Hoses and fittings for sewage
          0 €
          Hose intended for pressure cleaning of sewers. Features very high abrasion resistance, acc. to EN ISO 6945:2000, max. 0.5 g (100N); acc. to DIN 53516:1987 - 40 mm 3. Supplied as a complete hose assembly with BSP 60° male and female threaded fittings. Standard lengths: 40, 60, 80, 100, 120, 160, 180 m. Each completed hose assembly is pressure-tested and supplied with a quality certificate. Other fittings available - contact TUBES INTERNATIONAL®. Inner layer: black, smooth SBR rubber. Reinforcement: two textile braids. Outer layer: black, smooth NR/BR compound, highly resistant to abrasion and weathering. Working pressure: 250 bar. Working temperature: from -35°C to +80°C.
        • Hose for UV printing inks, TYGON® Ink 1000
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          New printing technologies widely introduced in recent years - digital printing, inkjet printing, wide-format printing, packaging printing and 3D printing - use modern UV-curable printing inks (UV inks, UV Ink) containing chemical components that are significantly more aggressive than traditional water- or solvent-based inks. UV inks contain aggressive acrylic monomers that, upon polymerization, form the binder of the ink or the 3D material; commonly used monomers include e.g. IBOA, HDDA, VCAP, VMOX, VEEA, ACMO. UV inks and materials are fed to the print head nozzles at a temperature of 40°C ÷ 50°C and have varying viscosity, from high for 3D printing to low for wide-format printing. Hoses feeding UV ink must have excellent chemical resistance to the ink components, both on the inner and outer side (immersion in the ink). Because the ink thickens and cures under UV radiation, the hose should completely block UV radiation (UV blocking) at wavelengths of 280–400 nm. The mechanical properties of the hose for use in printing machines are also very important: its flexibility, defined as the minimum bend radius and the force needed to bend it, must not be too great, due to the complex shape of its installation for mounting in the print head, and the need for cleaning and disassembly when replacing ink cartridges and during other maintenance activities. Fatigue resistance to bending is especially important in large-format printing, due to the large and fast movements of the print head. Transverse flexibility of the hose, in turn, is important for ease of fitting it onto fittings (the force required to push the fitting in) while maintaining the proper degree of hose clamping on the fitting, for tightness and reliability of the connection. The two-layer TYGON® Ink 1000 hose was developed to optimize all these properties and is characterized by exceptional chemical resistance to commonly used acrylic monomers, UV radiation blocking, flexibility and elasticity, and long service life. Used for all kinds of modern printing systems, such as: digital printing; inkjet printing; wide format printing; packaging printing; 3D printing. Maximum working pressure is given for a temperature of 23°C. Material: polyolefin. Operating temperature: up to +5°C. Inner hardness: 98 Shore (A). Outer hardness: 90 Shore (A). Density: 0.92 g/cm³. Note: Product packed in the Tubes International CLEAN ROOM Clean Zone under strict cleanliness standards. Product is non-returnable.
        • Hose for paints and solvents with antistatic wire PAINT SPRAY PA-M
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-quality German-made delivery hose with an inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures easy cleaning. Outer layer of NBR rubber, resistant to ozone, weather conditions and UV radiation. The hose is designed for adhesives, varnish, oil, paints, polar and aromatic solvents. The hose has two copper anti-static wires built into the braid, ensuring (when properly connected to metal fittings) conductivity of the hose assembly (R
        • Hose for paints and varnishes NR SPRAY C
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Rubber delivery hose with inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures easy cleaning. Smooth outer layer made of synthetic rubber, resistant to contact with chemicals and oil (ARPM Class B). A hose for many industrial applications, such as paint transfer and agricultural spraying. The good resistance of polyamide allows the hose to be used for paints, varnishes, solvents, adhesives and resins, oils, petrochemical substances and other chemicals. Anti-electrostatic properties of the hose are not declared. Inner layer: polyamide (PA), silicone-free. Reinforcement: textile braid: single for 1/4" and 3/8", double from 1/2" up. Outer layer: black synthetic rubber. Operating temperature: from -20°C to +90°C. Checking chemical resistance: PA chemical resistance table (preliminary selection), confirmation of resistance and conditions of use by Tubes International (in particular for temperatures above 50°C). Assembly: fittings with a nipple (hose tail) of a diameter matched to the hose, without sharp or high barbs that could cut or damage the inner polyamide layer when clamped, should be used. Assembly with bands, clamps or crimp ferrules.
        • Pressure washer hose CLEANY EVO
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Pressure washer hose CLEANY EVO

          All products | Low-pressure cleaning and washdown hoses
          0 €
          Flexible hose designed for washing with cold and hot water and light chemicals. Recommended for use in the food industry. Has increased resistance to aggressive cleaning agents. Compliant with European requirements for food substances 1935/2004 CE, 10/2011EU, 2020/1245EU (simulant liquids A, B, C). Transfer of food substances up to +40°C. TR-THERMO-12-BZ140-08-SS combined fittings can be used. Inner layer: colourless, smooth PVC. Reinforcement: double polyester braid. Outer layer: blue PVC. Operating temperature: from -20°C to +80°C (for 80 bar up to +50°C), working pressure depends on temperature.
        • Hose for steam humidifiers in air conditioning systems CONDITIONER HUMIDIFIER®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Specialist hose designed for conveying low-temperature steam to humidifiers in industrial air conditioning equipment. Soft and flexible, odourless, resistant to steam, hot water and condensate. Inner layer: white, odourless butyl rubber (IIR). Reinforcement: synthetic cord. Outer layer: white, odourless butyl rubber (IIR). Working temperature: from -30°C to +110°C.
        • Low-spallation hose for peristaltic pumps for biopharmaceutical applications PHARMA PURE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality, flexible hose in a natural white colour, made of multilayer thermoplastic elastomer, designed specifically for the pharmaceutical industry, biotechnology and laboratories. A unique feature of this hose is its very high resistance to spallation (the shedding of microscopic particles of hose material under pressure from the peristaltic pump rotor), ensuring very high fluid purity. Offers high fatigue resistance and an exceptionally long service life in peristaltic pumps, many times longer than any silicone hose (1000 h). Also features very low gas permeability and low absorption of the conveyed products. Ideal for cell culture harvesting and cultivation in vitro, vaccine production, bioreactors, sterile filling lines, fermentation, extraction and purification processes. The opaque hose wall protects sensitive products from UV radiation. Biocompatible - meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.2.9. Hygienic properties are confirmed by the Saint-Gobain validation guide for this hose. Complies with RoHS 2011/65/EU and REACH 1907/2006/EU. Suitable for repeated steam, ethylene oxide or radiation sterilisation (up to 2.5 Mrad – 25 kGray). Flame-resistant (UL 94 HB). Pressure safety factor 5:1. Assembly with special biopharmaceutical fittings and connectors is recommended. Maximum working pressure is specified at 23°C. Material: thermoplastic elastomer (TPE). Working temperature: from -40°C to +135°C. Brittleness temperature: -67°C. Hardness: 65 Shore (A). Density: 0.92 g/cm³.
        • Water hose for horticulture and industry MASTER PLUS
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          An exceptionally flexible water hose, even at low temperatures, designed for professional use in gardening and industry. Multilayer PVC construction. The double woven braid using NTS PLUS technology provides high pressure resistance, low expansion under pressure and resistance to the formation of kinks, bends and loops. The outer PVC layer is coated with a thin, transparent, glossy polymer (SKY TECH) that protects against UV radiation, is resistant to abrasion and cuts, and slides easily over surfaces. The hose's sturdy construction ensures long-lasting, trouble-free use. Phthalate-free (
        • Hose for high-purity applications, with low absorption and adsorption TYGON® 2475
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colourless, transparent, flexible hose for biopharmaceutical applications, completely free of plasticisers and oils. Used in the cosmetics industry, aseptic filling and dosing systems, diagnostic equipment, nuclear instrumentation, laboratory analysers and biotechnology for conveying cell and tissue cultures. Features hydrophobicity (non-wettability) and very low absorption and adsorption of water-based fluids compared with PVC, as well as lower gas permeability than silicone hoses, protecting sensitive fluids against oxidation. This minimises the risk of changes in fluid properties even with repeated hose use. The glass-smooth, non-porous inner surface prevents contaminants from depositing and adhering, facilitating complete fluid drainage and hose cleaning. Resistant to chemical cleaning agents and disinfectants. Offers good chemical resistance to a range of substances: acids, alkalis, salts, as well as alcohols and ketones. Not recommended for hydrocarbons. Meets USP Class VI requirements. Hygienic properties are confirmed by the Saint-Gobain validation guide for this hose. Suitable for ethylene oxide or radiation sterilisation (up to 4.5 kGy). Complies with RoHS 2011/65/EU and REACH 1907/2006/EU. Can be used as a single-use or reusable product. Disposal of used hoses does not release hazardous substances (e.g. chlorine); incineration produces only carbon dioxide and water. Pressure safety factor 5:1. Assembly on hose tails and fittings using clips and clamps. Maximum working pressure is specified at 23°C. Material: polyolefin. Maximum working temperature: up to +52°C. Brittleness temperature: -78°C. Hardness: 72 Shore (A). Density: 0.9 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM in compliance with strict cleanliness standards. Product is non-returnable.
        • Thin-walled BARRIER type freon hose, 6090
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Thin-walled BARRIER type freon hose, 6090

          All products | Hoses and fittings for air conditioning
          0 €
          A top-quality hose designed for automotive and industrial refrigeration and air-conditioning systems operating with R134a, R1234yf, R404A, R452A refrigerants, mineral oils and synthetic PAG, POE oils (for compressors). The outer layer is resistant to abrasion and weather conditions. Meets the requirements of SAE J2064 Type C Class I, SAE J3062 Type C Class I standards, General Motors: GMW14319, and complies with FORD specification: ESDS7H-19B591-AA. Assembly: use BURGACLIP (IT-73) quick-fit fittings or BU-6090 crimp fittings (IT-43, IT-44). Inner layer: black CIIR rubber coated with a layer of nylon (PA) and EPDM. Reinforcement: polyester braid. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -40°C to +135°C.
        • Compact hydraulic hose with single steel wire braid EN 857 BALPACK 1SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A compact medium-pressure hydraulic hose compliant with DIN EN 857 1SC, SAE 100R17 and ISO 11237 standards. Reinforced with a single high-strength steel braid, it provides high resistance to working pressure, excellent flexibility and a small bend radius. The outer layer of the hose is resistant to oil, weather conditions and abrasion. The hose is used in construction and agricultural machinery, handling equipment, lifts, forklifts, hydraulic presses and industrial hydraulic systems requiring high flexibility combined with high pressure resistance. Inner layer: synthetic rubber resistant to hydraulic oils. Reinforcement: single steel braid. Outer layer: synthetic rubber resistant to abrasion, oils and weather conditions. Working pressure: from 210 bar to 260 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (occasionally +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
        • Hydraulic hose with long service life for very high pressure EN 857 2SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose, smooth on the outside, with double steel braid reinforcement, with a reduced outer diameter and weight and increased flexibility (COMPACT type). Characterised by a higher working pressure compared to standard 2SC type hoses. Proven hose service life of 1,000,000 impulse cycles. Flame-retardant outer layer (MSHA), highly resistant to ozone, weather conditions, abrasion and UV radiation. Designed for high-pressure hydraulic installations. Meets standards: EN 857-2SC, SAE 100R16, SAE 100R19, ISO 11237, ISO 18752 TYPE BC. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 450 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (momentarily up to +120°C), for water up to +70°C, for air up to +60°C.
        • Electrically non-conductive hydraulic thermoplastic hose OL 8 NON CONDUCTIVE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, electrically non-conductive thermoplastic hose OL 8 NON CONDUCTIVE. Designed for hydraulic systems with oil, fuels and water-based fluids. Recommended for applications near transformers, medium- and high-voltage electrical installations and in insulated aerial platforms where insulating properties are required. The non-microperforated outer layer is resistant to hydrolysis and microorganisms, allowing operation in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, ANSI A92.2 (standard for aerial platforms - USA), MSHA. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: orange polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water up to +70°C).
        • High-pressure hydraulic hose POWERSPIR BESTFLEX 4SH EN 856 4 SH / ISO 3862
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Exceptionally flexible four-braid hydraulic hose for high pressure. Used in power hydraulics installations of large construction machinery and all kinds of hydraulically driven equipment. Standards: EN 856-4SH, ISO 3862, SAE 100 R13, SAE 100 R15. Inner layer: oil-resistant black synthetic rubber. Reinforcement: four spiral layers of high-tensile steel wire. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 250 bar to 420 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
        • Highly flexible high-pressure hydraulic hose BALMASTER BESTFLEX 4SP EN 856 4 SP / ISO 3862
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible four-spiral hydraulic hose, designed for operation under high-pressure conditions. Intended for power hydraulics installations in heavy construction machinery and in equipment and machines fitted with a hydraulic drive. Standards: EN 856-4SP, ISO 3862. Inner layer: oil-resistant black synthetic rubber. Reinforcement: four spiral layers of high-tensile steel wire. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 175 bar to 450 bar, (depending on hose diameter). Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
        • Highly flexible high-pressure hydraulic hose, ADVANSTAR- 4SH
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A multi-braid hydraulic hose for high pressure. A hose with increased flexibility compared to the standard requirement. Flame-retardant outer layer (MSHA). Used in power hydraulics installations of large construction machines and all types of hydraulically driven equipment. Standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black synthetic rubber. Reinforcement: four spiral layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 325 bar to 420 bar - depending on hose diameter. Operating temperature: from -40°C to +120°C (hydraulic oil).
        • Highly flexible high-pressure hydraulic hose, ADVANSTAR- 4SP
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Multi-braid high-pressure hydraulic hose. A hose with increased flexibility compared to the standard requirement. Flame-retardant outer layer (MSHA). Used in power hydraulics installations of large construction machinery and all types of hydraulically driven equipment. Standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black synthetic rubber. Reinforcement: four spiral layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 325 bar to 415 bar - depending on hose diameter. Operating temperature: from -40°C to +120°C (hydraulic oil).
        • Hydraulic hose with double steel wire braid EN 853 FORZA 2SN
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose with double steel wire braid. Designed for medium- and high-pressure hydraulic systems. Commonly used in hydraulic power systems of agricultural equipment, small working machines, machine tools and hydraulically driven equipment. Standards: EN 853-2SN, ISO 1436, SAE 100 R2AT. Inner layer: black synthetic rubber. Reinforcement: double steel wire braid. Outer layer: black synthetic rubber. Working pressure: from 55 bar to 415 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (hydraulic oil), (temporarily + 120°C); up to +60°C (air).
        • Hydraulic hose with single steel wire braid EN 853 FORZA 1SN
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose with a single steel wire braid, designed for medium-pressure hydraulic installations. Commonly used in power hydraulics of agricultural equipment, small working machines, machine tools, equipment with a hydraulic drive. Standards: EN 853-1SN, ISO 1436, SAE 100 R1AT. Inner layer: black synthetic rubber. Reinforcement: single steel wire braid. Outer layer: black synthetic rubber. Working pressure: from 35 bar to 250 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
        • Hydraulic hose with single steel wire braid and smooth cover, EN 857 1SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose, smooth on the outside, with a single steel wire braid, of reduced outer diameter and weight and increased flexibility (COMPACT type). With extended service life compared to the standard. Confirmed hose life of 300,000 impulse cycles. Flame-retardant outer layer (MSHA). Complies with standards: EN 857 1SC, ISO 11237-1. Inner layer: black synthetic rubber. Reinforcement: single steel wire braid. Outer layer: black synthetic rubber. Working pressure: from 90 bar to 225 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (momentarily up to +120°C). For water and air, maximum operating temperature +70°C.
        • Hydraulic hose with single textile braid TEXMASTER 1 EN 854 1TE / SAE 100 R6
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Low-pressure hydraulic hose intended for general use in hydraulic systems. The design based on a single textile braid ensures optimal flexibility, resistance to working pressure and long service life in daily use. Standard: EN 854 2TE, SAE 100 R6. Inner layer: oil-resistant black synthetic rubber. Reinforcement: single high-tensile textile braid. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 17 bar to 34 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (for water +70°C, for air +50°C).
        • Hydraulic hose with single textile braid TEXMASTER 2 EN 854 2TE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Low-pressure hydraulic hose designed for general use in hydraulic systems. The hose construction is based on a single textile braid, which ensures good flexibility, durability and resistance to typical operating loads. Standard: EN 854 2TE. Inner layer: oil-resistant black synthetic rubber. Reinforcement: single high-strength textile braid. Outer layer: black synthetic rubber resistant to oils, weather conditions and abrasion. Working pressure: from 40 bar to 80 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (for water +70°C, for air +50°C).
        • High-pressure capillary hose for chromatography (HPLC) VERSILON™ PEEK
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose designed specifically for high-performance liquid chromatography (HPLC - High-Performance Liquid Chromatography), where the liquid being analysed is fed through a narrow tube (capillary) at a high pressure of several hundred bar. VERSILON™ PEEK capillary hose made of polyetheretherketone (PEEK) provides an alternative to stainless steel tubes, offering good corrosion resistance and suitability for applications where contact between the analysed liquid and metal is undesirable. Polyetheretherketone (PEEK) has temperature resistance similar to PTFE, but is stronger and abrasion-resistant. VERSILON™ PEEK capillary hose can operate at working pressures up to 230 bar and is highly chemically resistant, dimensionally stable, flexible, easy to cut, smooth, resistant to leaching and steam. Flame-retardant (UL 94 V-0). In addition to chromatography, hose applications may include medicine, the chemical and pharmaceutical industries, semiconductor manufacturing, aviation and nuclear technology. Pressure safety factor 4:1. Due to the high pressure, special fittings from equipment manufacturers or chromatography fittings from the PRECISION FITTINGS range are used to connect the hose. The connection is made by compression on the outside diameter. Hose available on special order. Maximum working pressure is specified at 23°C. Material: polyetheretherketone (PEEK). Working temperature: from -60°C to +250°C (temporarily up to +310°C; working pressure above 100°C depends on temperature). Hardness: 75 Shore (A). Density: 1.31 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM in compliance with strict cleanliness standards. Product is non-returnable.
        • Composite hose for highly aggressive chemicals CHEMSTAR PTFE SG, SS
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses are available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Suction-delivery hose designed for transferring, unloading and loading highly aggressive chemicals for which the corrosion resistance of polypropylene is insufficient. Inner layer made of ECTFE (a fluoropolymer with high chemical resistance). Safety factor 4:1 (HD - Heavy Duty version - 5:1). Other hose versions are available on special request: with a black antistatic ATEX outer cover (compliant with Directive 94/9/EC), with polyurethane-coated fabric offering high abrasion resistance, with a PVDF-coated stainless steel inner helix and an inner layer of special film with excellent properties exceeding those of standard PTFE versions (working temperature: from -40°C to +125°C). Applications: loading and unloading systems, filling and emptying equipment (UNO), unloading and loading road and rail tankers, permanent equipment on road tankers, industrial installations. HD version - port loading and unloading systems (ship-to-shore and ship-to-ship). Standards: meets the requirements of EN 13765:2018 (type 2, type 3). Assembly: supplied as complete hose assemblies with fittings. Available versions: SG (AISI 316 stainless steel / galvanised steel), SS (AISI 316 stainless steel / AISI 316 stainless steel) - differing in the materials of the inner and outer helices. Inner layer: ECTFE (first film layer), polypropylene (second film layer). Reinforcement: inner / outer helix, polyethylene (fabric layers). Cover: abrasion- and weather-resistant polyester. Working temperature: from -30°C to +80°C, from -40°C to +100°C (HD version).
        • Composite hose for chemicals CHEMSTAR PG, PS, SS
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Suction-delivery hose designed for conveying, unloading and loading a wide range of hazardous chemicals: acids, alkalis and solvents under standard operating conditions. Safety factor 4:1 (HD - Heavy Duty version - 5:1). Applications: transfer systems, filling and emptying equipment (UNO), unloading and loading road and rail tankers, permanent equipment on road tankers, industrial installations. HD version - port transfer systems (ship-to-shore and ship-to-ship). Standards: meets the requirements of EN 13765:2018 (type 2), EN 13765:2018 (type 3). Assembly: supplied as complete hose assemblies with fittings. Available versions: PG, PS, SS - differing in the material of the internal and external helix. Inner layer: polypropylene (fabric and film layers). Reinforcement: internal / external helix; polyethylene (fabric layers). Cover: abrasion- and weather-resistant polyester. Working temperature: from -30°C to +80°C, from -40°C to +100°C (HD version).
        • Composite hose for transferring petrochemical products FUEL STAR GG, AG, AA
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Suction-delivery hose designed for conveying, unloading and loading petrochemical products including fuel oils, petrol, diesel fuels, lubricating oils and aromatic substances (up to 50%) under standard operating conditions. Safety factor 4:1 (HD - Heavy Duty version - 5:1). The AA version (aluminium internal and external helix) has significantly lower weight for easier hose handling. Applications: transfer systems, filling and emptying equipment (UNO), unloading and loading road and rail tankers, industrial installations, permanent equipment on road tankers. HD version - port transfer systems (ship-to-shore and ship-to-ship). Standards: meets the requirements of EN 13765:2018 (type 3 - HD version, type 2 - SD version). Assembly: supplied as complete hose assemblies with fittings. Available versions: GG (galvanised steel / galvanised steel), AG (aluminium / galvanised steel), AA (aluminium / aluminium) - differing in the material of the internal and external helix. Inner layer: polypropylene (fabric and film layers). Reinforcement: internal / external helix; polypropylene (fabric layers). Cover: abrasion- and weather-resistant polyester. Working temperature: from -30°C to +80°C; from -40°C to +100°C (HD version).
        • Laboratory hose for analytical micropumps TYGON® LMT-55 MICROBORE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colourless, crystal-clear, soft and flexible laboratory hose for versatile use. The MICROBORE version of TYGON® LMT-55 hose is an economical solution for analytical peristaltic micropumps in standard applications. Used for sampling, in automatic laboratory analysers and for dosing reagents. Characterised by excellent chemical resistance. The transparent wall allowing flow control, the glass-smooth internal surface minimising deposit formation and very low gas permeability are additional advantages of the hose. It is manufactured to strict dimensional tolerances batch to batch, which guarantees repeatability of results in laboratory testing. Non-toxic, odourless and tasteless, free of DEHP phthalates and BPA. Compliant with REACH 1907/2006/EU and RoHS 2011/65/EU regulations – contains no hazardous or prohibited substances. The hose is available in versions: with 2 stops, with 3 stops or without stops. Coloured stops are free of phthalates and are made using bioplasticisers. The colour combination of the stops allows identification of the hose size. Length of hose with 2 or 3 stops: 381 mm. Distance between stops: 152 mm. Versions with stops are sold in full packs of 12 pieces. Depending on stock availability, minimum order quantities (MOQ) of 120 or 240 pcs may apply. Length of hose without stops: 10 m. Depending on stock availability, minimum order quantities (MOQ) of 50 or 100 m may apply. Service life in a peristaltic pump of up to 100 h. If increased service life is required, consider the similar TYGON® E-LFL hose in the MICROBORE version – available on request. Material: PVC (special, DEHP-free). Operating temperature: up to +74°C. Brittleness temperature: -50°C. Hardness: 55 Shore (A). Density: 1.18 g/cm³. Note: The product is packed in the Tubes International CLEAN ROOM clean zone in compliance with strict cleanliness standards. The product is not subject to return.
        • Hose with excellent chemical resistance and inertness VERSILON™ SE-200
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colorless, crystal-clear, flexible chemical hose of two-layer construction with an inner layer of FEP fluoropolymer with unique chemical resistance and inertness. Features significantly greater flexibility than rigid hoses made entirely of PTFE or other fluoropolymers. The smooth inner layer, resistant and chemically inert, eliminates the risk of fluid contamination. Resistant to a wide range of chemical substances, from corrosive substances to MEK-based solvents. Contains no phthalates or BPA (Bisphenol A). Sterilization by ethylene oxide. Used in various industrial applications: chemical flow, production and packaging of paints, solvents and adhesives, for inks and toners, for photographic chemicals, fertilizers and pesticides, in semiconductor production. Compliant with REACH (2006/1907/EC) – contains no hazardous or banned substances. Pressure safety factor 5:1. Mounted on suitable nipples and fittings with a single barb using clamps and bands, taking care not to damage the inner FEP layer (see drawing below). We recommend that hose selection for chemical applications be made in consultation with Tubes International specialists. Maximum working pressure is given for a temperature of 23°C. Material: FEP / special PVC. Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66 Shore (A). Density: 1.21 g/cm3. Note: Product packed in the Tubes International CLEAN ROOM Clean Zone under strict cleanliness standards. Product is non-returnable.
        • Hose with high chemical and temperature resistance VERSILON™ F-5500-A
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality, black, opaque, flexible and soft fluoroelastomer rubber hose, which, thanks to its physical and chemical properties, can work in difficult conditions, including elevated temperatures (up to +204°C). Highly resistant to a range of aggressive chemicals: concentrated acids, hydrocarbons, alcohol, hot oil and fuels, solvents. Used, among others, for cleaning solvents (dry cleaning, solvent recovery systems). Suitable for peristaltic pumps. Resistant to ozone, sunlight and weather conditions. The opaque black hose wall fully protects light-sensitive substances. The hose's post-vulcanization heat treatment production process removes all residues and ensures minimal outgassing, required in vacuum and aerospace applications. Used in laboratories and general industrial applications. Compliant with RoHS 2011/65/EU. Pressure safety factor 5:1. Mounted on nipples and fittings using clamps and bands. We recommend that hose selection for chemical applications be made in consultation with Tubes International specialists. Maximum working pressure is given for a temperature of 23°C. Material: fluoroelastomer (FKM, viton). Maximum operating temperature: +204°C. Brittleness temperature: -51°C. Hardness: 60 Shore (A). Density: 1.90 g/cm3. Note: The product is packaged in the Tubes International CLEAN ROOM Clean Zone in compliance with strict cleanliness standards. The product is non-returnable.
        Go to Top