- Home
- Industrial hoses
- Hoses and fittings for air conditioning
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight with a ferrule for hose thermoplastic FR 5 DN4 (5/32"), with thread internal UNF, type SAE, 45° cone. Material fittings: steel carbon, galvanized. Material ferrule: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular BURGACLIP without a nut for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular BURGACLIP with thread internal UNF for compressor, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular BURGACLIP with thread external UNF, with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular BURGACLIP with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular for soldering, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular with thread internal UNF, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular with thread external UNF, for hose for air conditioning type 3055. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular with thread external UNF, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal UNF SAE, 45° cone, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread external UNF, with socket, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - Tee type "Y" BURGACLIP for hose type 3090 for air conditioning. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector angled 90° BURGACLIP for hose type 3090 for air conditioning. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hoses thick-walled for air conditioning type 3055 and 3056. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut (cap) for adapter R12/R134 protecting valve against various contaminants and against bleeding with the system the medium refrigerant (index adapter: BU-7034/7036 or BU-7035). Material: polyamide.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee (connector) with ferrules for hose thermoplastic FR 5 DN2 (1/12"). Material tee: brass. Material ferrule: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule assembly screw for ends hose for air conditioning type 3055. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule assembly screw for ends hose for air conditioning type 3056. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together plug quick coupling with a shut-off valve terminated thread external UNF intended for air conditioning and refrigeration, used for filling and emptying installation. allowed is twisting under pressure residual (possibility unscrewing under maximum pressure working). Material: steel carbon, galvanized. sealing: CR - rubber chloroprene (od -40°C up to +120°C). loss the medium: 1.5 g/rok. max. Vacuum: 2 mm Hg. Wsp. safety: 3:1 (pressure static), 2:1 (pressure dynamic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimper hand TNT250/P (clamp six-jaw) with manual pump hydraulic MPT100. head crimpers allows gear ratio jej through hose, co is important at crimping ends angled. W set is found : 6 sets jaws for hoses standard and o reduced diameter outer, grease, plastic caliper, Case. the given force crimp at 700 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimper hand TNT8 (clamp eight-jaw) with manual pump hydraulic. head crimpers allows gear ratio jej through hose, co is important at crimping ends angled. W set is found : 6 sets jaws for hoses standard and o reduced diameter outer 5/16", 5/16 ÷ 13/32", 1/2", 13/32", 1/2" ÷ 5/8" and 5/8", Case. the given force crimp at 200 bar.
Select options This product has multiple variants. The options may be chosen on the product page / Details6 mm tubular fitting, with ferrule, for FR5T CAPILLARY type thermoplastic hose for air conditioning. Allows connecting rubber hose assemblies with air conditioning system components. Material: for DN2 copper (nipple, tube), aluminum (ferrule); for DN4 copper (nipple, tube), carbon steel (ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with gland with UNF SAE female thread – 45° cone seal, for FR5T CAPILLARY thermoplastic air-conditioning hose. Allows connection of rubber hose assemblies to air-conditioning system components. Material: for DN2 brass (nipple, nut), aluminium (ferrule); for DN4 carbon steel (nipple, nut, ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with UNF SAE female thread - 45° cone seal, for FR5T CAPILLARY type thermoplastic hose for air conditioning. Allows connection of rubber hose assemblies with air conditioning system components. Material: for DN2 brass (nipple, nut), aluminum (ferrule); for DN4 carbon steel (nipple, nut, ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with UNF SAE female thread - 45° cone seal, with O-rings at the "tail" end (ZC-FR5T-101-04-DN5 without O-rings at the "tail" end), for the FR5T type thermoplastic hose for freon, with an outer layer made of thermoplastic polymer. Allows the connection of rubber hose assemblies with air-conditioning system components. Material: carbon steel (nipple, nut, ferrule).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial refrigeration systems (an alternative to copper tubing), for domestic and industrial HVAC installations and automotive air conditioning (filling and testing functions only). In particular for R134a, R404A, R407C, R410A, R1234yf, R1234ze, R290, R32 refrigerants and PAG, POE, PVE and AB type compressor oils. Vacuum value: 5 mbar (absolute pressure). Standards: EN 1736, ISO 13971 class I, UL1963. Installation: use ZC-FR type fittings (IT-202). Inner layer: polyamide (PA) separated by a layer of thermoplastic polymer. Reinforcement: polyester braid. Outer layer: black, blue or red polyurethane (PU). Working pressure: 130 bar. Operating temperature: from -40°C to +120°C (momentarily +130°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial refrigeration systems (an alternative to copper tubing), for domestic and industrial HVAC installations and automotive air conditioning (for filling and testing functions only). In particular for R134a, R404A, R407C, R410A, R1234yf, R1234ze, R290, R32 refrigerants and PAG, POE, PVE and AB type compressor oils. Waterproof outer layer, resistant to bending and abrasion. Vacuum value: 5 mbar (absolute pressure). Standards: EN 1736, ISO 13971 class I, UL1963. Assembly: use ZC-FR (IT-202) type fittings. Inner layer: polyamide (PA) separated by a layer of thermoplastic polymer. Reinforcement: polyester braid. Outer layer: thermoplastic polymer. Working pressure: 120 bar. Operating temperature: from -40°C to +120°C (momentarily +130°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA top-quality hose designed for automotive and industrial refrigeration and air-conditioning systems operating with R134a, R1234yf, R404A, R452A refrigerants, mineral oils and synthetic PAG, POE oils (for compressors). The outer layer is resistant to abrasion and weather conditions. Meets the requirements of SAE J2064 Type C Class I, SAE J3062 Type C Class I standards, General Motors: GMW14319, and complies with FORD specification: ESDS7H-19B591-AA. Assembly: use BURGACLIP (IT-73) quick-fit fittings or BU-6090 crimp fittings (IT-43, IT-44). Inner layer: black CIIR rubber coated with a layer of nylon (PA) and EPDM. Reinforcement: polyester braid. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -40°C to +135°C.








































