0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Fitting with a female UNF thread SAE, with sleeve, FR5T-101
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting with a female UNF thread SAE, with sleeve, FR5T-101

          All products | Hoses and fittings for air conditioning
          0 €
          Fitting with UNF SAE female thread - 45° cone seal, for FR5T CAPILLARY type thermoplastic hose for air conditioning. Allows connection of rubber hose assemblies with air conditioning system components. Material: for DN2 brass (nipple, nut), aluminum (sleeve); for DN4 carbon steel (nipple, nut, sleeve).
        • Fitting with a female UNF thread SAE, with sleeve, for hose FR5T
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting with a female UNF thread SAE, with sleeve, for hose FR5T

          All products | Hoses and fittings for air conditioning
          0 €
          Fitting with UNF SAE female thread - 45° cone seal, with O-rings at the "tail" end (ZC-FR5T-101-04-DN5 without O-rings at the "tail" end), for the FR5T type thermoplastic hose for freon, with an outer layer made of thermoplastic polymer. Allows the connection of rubber hose assemblies with air-conditioning system components. Material: carbon steel (nipple, nut, sleeve).
        • Light thermoplastic freon hose FR5T CAPILLARY
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Light thermoplastic freon hose FR5T CAPILLARY

          All products | Hoses and fittings for air conditioning
          0 €
          Lightweight, flexible hose designed for industrial refrigeration systems (an alternative to copper tubing), for domestic and industrial HVAC installations and automotive air conditioning (filling and testing functions only). In particular for R134a, R404A, R407C, R410A, R1234yf, R1234ze, R290, R32 refrigerants and PAG, POE, PVE and AB type compressor oils. Vacuum value: 5 mbar (absolute pressure). Standards: EN 1736, ISO 13971 class I, UL1963. Installation: use ZC-FR type fittings (IT-202). Inner layer: polyamide (PA) separated by a layer of thermoplastic polymer. Reinforcement: polyester braid. Outer layer: black, blue or red polyurethane (PU). Working pressure: 130 bar. Operating temperature: from -40°C to +120°C (momentarily +130°C).
        • Heavy-duty industrial steel hose resistant to vibration C-FLEX
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. For an individual quotation, use the enquiry form in the shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Robust industrial steel hose manufactured in England, with a smaller bending radius and slightly higher working pressure than B-FLEX hose. Made from stainless steel, annularly corrugated, with single or double stainless steel braid. Its profile features tall, closely spaced corrugations, providing excellent flexibility and vibration resistance. Designed for conveying liquids and gases under pressure: water, steam, air, hot oil and chemicals. Safety factor 4:1. Suitable for operation under high vacuum. An AISI 316 steel version is available on special order. Inner layer: corrugated hose made from AISI 321 stainless steel sheet. Reinforcement: single or double AISI 304 steel braid. Working temperature: from -200°C to +700°C (working pressure depends on temperature).
        • Assembly pliers, system 3/4", LOC-LINE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly pliers, system 3/4″, LOC-LINE®

          Air and water hoses | All products
          0 €
          Assembly pliers made of durable plastic for coolant lines in the 3/4" system allow easy assembly of individual segments (except valves, tees and adapters).
        • Sleeve for fittings and connectors Pure-Fit® SIB®, polypropylene or PVDF, system BarbLock®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pure-Fit® fitting made of polypropylene (PP) or PVDF in a natural translucent colour. Available in a range of the most popular diameters and wall thicknesses of biopharmaceutical hoses, packed in the manufacturer's certified clean zone, in packs of 250 pcs. (for ID 3/4" - 25 pcs.). The Pure-Fit® fitting of the BarbLock® system should be selected according to the hose's inner and outer diameter. For other hose sizes and smaller quantities, standard blue BarbLock® fittings, packed in the Tubes International clean zone, can be used. Indexes ending in -AL denote a one-piece version, where the fitting's inner and outer sleeve are integrated. Separate tools (manual or pneumatic) are used for assembling individual fitting sizes – contact Tubes International. Sterilization: radiation (PP) or radiation and autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
        • Sleeve for hose fittings and connectors, polypropylene or PVDF, BarbLock®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          The BarbLock ® clamp is designed for tight and reliable mounting of fittings on flexible hoses. Unlike the various bands and clamps often used, the BarbLock ® clamp provides full-circumference (360°) compression of the hose onto the fitting, guaranteeing complete tightness of the connection. It can be used with low-pressure plastic and elastomer hoses, both unreinforced and braid-reinforced, of various wall thicknesses. Hose fittings made of plastics to be mounted should have the appropriate shape, length and barbs ("tail") for the hose, as well as a retaining collar enabling correct mounting of the clamp. Many types of fittings can be mounted, used in laboratory, biopharmaceutical and medical technology, including Pure-Fit ® SIB ®. The BarbLock ® clamp is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, free of BPA (Bisphenol A) and animal-derived substances. The BarbLock ® clamp should be selected according to the inner and outer diameter of the hose. Separate tools (manual or pneumatic) are used for mounting individual clamp sizes - contact Tubes International. Items with the -AL fitting suffix are the one-piece version, where the inner and outer sleeve of the clamp are integrated. Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
        • Twin welding hose for oxygen and acetylene, CODAN 2803 OXYGEN/ACETYLEN, ISO 3821
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, twin hose for oxygen and acetylene, compliant with EN ISO 3821 standard. For use with industrial gas welding equipment. A separating groove between the hoses allows for easy separation and simple attachment to a gas cylinder or welding torch. Also ideal for other applications, e.g. as an air inlet/outlet in sandblasting equipment. Inner layer: black EPDM rubber (acetylene hose), SBR/EPDM (oxygen hose). Reinforcement: polyester. Outer layer: blue EPDM rubber for oxygen, red EPDM rubber for acetylene. Working pressure: 20 bar. Operating temperature: from -30°C to +80°C.
        • Extension for coolant, system 1/4", LOC-LINE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Extension element for use in coolant supply systems to reduce the number of LOC-LINE® segments - 1/4" system. Without clamp. Material: acetal. Working pressure: up to 3 bar. Working temperature: up to +76°C.
        • Adapter from 1/4" socket to 1/8" NPT, system 1/4", LOC-LINE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter from 1/4" socket to 1/8" NPT female thread for LOC-LINE® coolant hoses - 1/4" system. Material: acetal. Working pressure: up to 3 bar. Working temperature: up to +76°C.
        • Industrial rubber hose for water and air up to 20 bar TUBES 2116-20
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Industrial rubber hose for water and air, designed for washing floors and industrial equipment with hot water, as well as for light chemical products in industry and agriculture. It is resistant to weather conditions, ozone and abrasion, but is not resistant to oil, and is also not recommended for use with air containing oil mist. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: red or blue EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (momentarily up to +120°C).
        • Industrial water hose GOLDTEK PRO made of PVC (PVC)
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Exceptionally flexible, even at low temperatures, water hose designed for intensive professional use in industry, agriculture and horticulture, highly resistant to abrasion and weather conditions. Multi-layer PVC construction. Double woven braid in NTS PLUS technology ensures high pressure resistance, low expansion under pressure and resistance to kinking, twisting and looping. Outer PVC layer coated with transparent glossy polymer (SKY TECH), protecting against UV radiation, resistant to abrasion and cuts, with easy sliding over surfaces. Strong hose construction ensures long-lasting, intensive and trouble-free use. Phthalate-free (
        • Silicone hose with an AISI 304 steel braid for cold and hot water CODAN 4826, 4830
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible silicone hose made of high-temperature resistant material. Designed for heating and cooling of commercial vehicles, for high-temperature air and water cooling systems in generators and stationary engines. Available with braid featuring a double blue or red marking stripe. Available on special order in a braid version without a marking stripe. * Note: Minimum order quantities may apply. Inner layer: transparent silicone. Reinforcement: external wire braid of AISI 304 steel with double marking stripe. Operating temperature: from -40°C to +170°C.
        • Thermoplastic freon hose with thermoplastic polymer cover FR5T
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Thermoplastic freon hose with thermoplastic polymer cover FR5T

          All products | Hoses and fittings for air conditioning
          0 €
          Lightweight, flexible hose designed for industrial refrigeration systems (an alternative to copper tubing), for domestic and industrial HVAC installations and automotive air conditioning (for filling and testing functions only). In particular for R134a, R404A, R407C, R410A, R1234yf, R1234ze, R290, R32 refrigerants and PAG, POE, PVE and AB type compressor oils. Waterproof outer layer, resistant to bending and abrasion. Vacuum value: 5 mbar (absolute pressure). Standards: EN 1736, ISO 13971 class I, UL1963. Assembly: use ZC-FR (IT-202) type fittings. Inner layer: polyamide (PA) separated by a layer of thermoplastic polymer. Reinforcement: polyester braid. Outer layer: thermoplastic polymer. Working pressure: 120 bar. Operating temperature: from -40°C to +120°C (momentarily +130°C).
        • "Y" branch connector for coolant, system 1/4", LOC-LINE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          "Y" tee distributor for LOC-LINE® coolant hoses - 1/4" system. Material: acetal. Working pressure: up to 3 bar. Working temperature: up to +76°C.
        • Tee type "T" Pure-Fit® SIB®, polypropylene or PVDF, system BarbLock®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          The Pure-Fit ® "T"-type tee is designed for Sani-Tech ® STHT ®, C-Flex ® and PharMed ® BPT biopharmaceutical hoses. It can also be used with other hoses of similar material (silicone, thermoplastic elastomer). The fitting is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, free of BPA (Bisphenol A) and animal-derived substances. Hygienic properties confirmed by the Saint-Gobain validation guide. The Pure-Fit ® fitting should be mounted on the hose using special clamps (BarbLock ® system). The two parts of the clamp, slid onto each other, compress the hose around its entire circumference (360°), ensuring complete tightness of the connection, while also providing a smooth, stepless transition between the inner surface of the hose and the inside of the fitting tail (Smooth Inner Bore). This eliminates turbulence and dead spaces - flow stagnation areas that can be a site for bacterial growth. The use of Pure-Fit ® fittings mounted with Pure-Fit ® / BarbLock ® clamps provides significantly better tightness and hygienic properties of the connection compared to mounting with clamps/bands. Sterilization: by radiation (PP) or by radiation and in an autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
        • Tee type "Y" Pure-Fit® SIB®, polypropylene or PVDF, system BarbLock®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pure-Fit® "Y" tee fitting is intended for Sani-Tech® STHT®, C-Flex® and PharMed® BPT biopharmaceutical hoses. It can also be used with other hoses of similar material (silicone, thermoplastic elastomer). The fitting is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, containing no BPA (Bisphenol A) or substances of animal origin. Hygienic properties are confirmed by the Saint-Gobain validation guide. The Pure-Fit® fitting should be mounted onto the hose using special fittings (BarbLock® system). The two parts of the fitting, slid onto each other, compress the hose around its entire circumference (360°), ensuring complete tightness of the connection, while providing a smooth, stepless transition between the hose's inner surface and the inside of the fitting's tail (Smooth Inner Bore). This eliminates turbulence and dead spaces – areas of flow stagnation that could become sites of bacterial growth. The use of Pure-Fit® fittings secured with Pure-Fit®/Barblock® fittings ensures significantly better tightness and hygienic properties of the connection compared to assembly with clamps. Sterilization: radiation (PP) or radiation and autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
        • Universal antibacterial hose VERSILON™ SILVER
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible, highly hygienic hose with a phthalate-free inner layer that also inhibits the growth of all types of microorganisms: bacteria, fungi and algae. The special polymer additive AlphaSan ® (a silver-containing ceramic ion-exchange resin based on zirconium phosphate) prevents microbial growth and the formation of mould and biofilm. Silver plays a significant role in the inhibitor's action and is hygienically safe. VERSILON™ SILVER hose is used in water purification, ice machines, chemical transfer and other industrial applications, preventing product contamination, biological corrosion and unpleasant odours. Meets FDA and NSF-51 requirements and does not discolour during use. Pressure safety factor 5:1. Installed on hose tails and fittings using bands and clamps. The maximum working pressure is specified at 23°C. Material: PVC (special). Working temperature: up to +74°C. Brittleness temperature: -35°C. Hardness: 69 Shore (A). Density: 1.21 g/cm³. Note: Product prepared and packaged in the Tubes International CLEAN ROOM in compliance with strict cleanliness standards. This product is non-returnable.
        • Universal hose for peristaltic pumps VERSILON™ TR-1055
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A hose made of a special EPDM rubber compound for use in peristaltic pumps. Chemically resistant, resistant to UV radiation, ozone and abrasion, with excellent bending fatigue resistance, it provides a long service life (over 1000 h) and maintains constant flow during operation in the pump. Used for dosing soap, cleaning and disinfecting agents, alkaline chemical substances, in laundries, dishwashing facilities, for wastewater discharge, for brake fluids and a number of other substances. Compliant with RoHS 2011/65/EU. Pressure safety factor 5:1. Mounted on nipples and fittings using clamps and bands. Maximum working pressure is given for a temperature of 23°C. Material: EPDM rubber (special). Operating temperature: from -60°C to +121°C. Hardness: 55 Shore (A). Density: 1.11 g/cm³. Note: Product packed in the Tubes International CLEAN ROOM Clean Zone under strict cleanliness standards. Product is non-returnable.
        • Multilayer helically corrugated steel hose for high pressures and vibration damping BOA DUO®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. For an individual quotation, use the enquiry form in the shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Special high-pressure steel hose with a double wall and helical corrugations produced by cold forming and electric welding using a process patented in Switzerland. Corrugated steel strip is wound helically and resistance-welded at the corrugation crest of the tube. The double wall, which becomes a triple wall at the corrugation crest, provides exceptional strength and service life while maintaining high flexibility and a small bending radius. Depending on the reinforcement version, the hose has one or more high-strength stainless steel braids; it is also available without braid. Safety factor 4:1. The hose also provides excellent vibration damping, preventing vibration transmission between equipment. Meets ISO 10380 requirements. Designed for liquids and gases in high-pressure applications and for all types of piping systems under demanding operating conditions. Used with engines, pumps and compressors, as a universal vibration damper and in high-pressure gas systems, among other applications. The available UHP version (DN5 and DN6), with increased working pressure, is intended particularly for hose assemblies for filling high-pressure gas cylinders. Inner layer: corrugated AISI 316Ti steel hose (UHP version – AISI 316L). Reinforcement: single or double AISI 304 steel braid. Working temperature: from -273°C to +600°C (working pressure depends on temperature).
        • High-quality composite hose for aviation fuels AERO STAR SG, SS, AA
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available exclusively as ready-made hose assemblies with fittings crimped by Tubes International. To receive an individual offer, please use the inquiry form in the shop or download the hose selection form (available as an attachment), fill it in and send it to: sklep@tubes-international.com High-quality composite hose for transferring special aviation fuels, jet engine fuels (JET A-1 and JP-6), jet engine biofuels, synthetic fuels (SPK - Synthetic Paraffinic Kerosene) and aviation turbine fuels (ATF - Aviation Turbine Fuel, also abbreviated as avtur). Characterised by high chemical resistance and strong construction. Safety factor 4:1 (HD - Heavy Duty version - 5:1). AA version (aluminium inner and outer helix) with significantly reduced weight, making the hose easier to handle. Application: transfer systems, filling and emptying equipment (UNO), unloading and loading of road and rail tankers, industrial installations, permanent equipment of road tankers. Standards: meets the requirements of EN 13765:2018 (type 3), compliant with Australian standards AS 2683 and with NAHAD recommendations (NAHAD 600/2005). Assembly: supplied as ready-made hose assemblies with fittings. Available versions: SG (stainless steel AISI 316 / galvanised steel), SS (stainless steel AISI 316 / stainless steel AISI 316), AA (aluminium / aluminium) – differing in the material of the inner and outer helix. Inner layer: polyamide (fabric layer, film). Reinforcement: inner / outer helix; polypropylene (fabric layers). Cover: abrasion- and weather-resistant fabric coated with PVC. Operating temperature: from -40°C to +100°C.
        • Biopharmaceutical hose for analytical micropumps PHARMED® BPT MICROBORE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-quality, flexible, cream-coloured hose, designed specifically for the pharmaceutical industry, biotechnology and laboratories. Has high fatigue resistance, exceptionally long service life when operating in a peristaltic pump, and good resistance to spallation (chipping of micro-particles of hose material caused by pressure from the pump rotor). It is also characterized by relatively low permeability to gaseous media, low absorption of transferred products, and good resistance to acids, bases and oxidation. The opaque hose wall protects sensitive products from UV radiation. The MICROBORE version of the PHARMED® BPT hose is an ideal solution for analytical micropumps where biocompatibility and high service life in pump operation (1000 h and more) are required. Biocompatible – non-toxic and non-haemolytic, meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.2.9. Hygienic properties confirmed by the Saint-Gobain validation guide for this hose. Compliant with REACH 1907/2006/EU and RoHS 2011/65/EU regulations – contains no hazardous or banned substances. Can be repeatedly steam-sterilized (30 min, 1 bar, +121°C, up to 5 times without affecting the hose's service life). Sterilization with ethylene oxide or radiation (up to 5.0 Mrad - 50 KGray) is also possible. The hose is available in versions with 2 or 3 stops or without stops. The coloured stops are phthalate-free and made using bioplasticizers. The combination of stop colours allows the hose size to be identified. Hose length with 2 or 3 stops: 381 mm. Distance between stops: 152 mm. Versions with stops are sold in full packs of 6 pieces. Depending on stock availability, minimum order quantities (MOQ) may apply – from 30 to 240 pcs. of hose. Hose length without stops: 3 m. Depending on stock availability, minimum order quantities (MOQ) of 15 or 99 m may apply. Material: TPE (thermoplastic elastomer). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 64 Shore (A). Density: 0.98 g/cm³.
        • Hose for concrete SHANNON/80 HD®
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for concrete SHANNON/80 HD®

          All products | Bulk material transfer hoses
          0 €
          Hoses are available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Strong steel cord reinforced hose for pouring concrete on construction sites. Used as the final flexible section of the articulated pipeline of a mobile pump. Inner layer made of rubber with good resistance to abrasion from wet concrete. Multiple steel cord reinforcement provides high pressure resistance. Also withstands vacuum during cleaning. Outer layer resistant to abrasion, weather conditions and ozone. SHANNON 85 ® hose is available as complete hose assemblies fitted at one or both ends with special grooved couplings for concrete hoses, in sizes and lengths specified by the customer. Inner layer: black SBR/NR rubber. Reinforcement: 4 ÷ 6 layers of steel cord - depending on hose diameter. Outer layer: black SBR/NR compound. Working pressure: 85 bar. Working temperature: from -40°C to +70°C.
        • Coolant hose HYDRAFIX FR201
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coolant hose HYDRAFIX FR201

          Air and water hoses | All products
          0 €
          Hose intended for low-pressure conveying of air, water, oils and other substances used in cooling processes during metalworking. Its special construction provides shape memory, allowing precise direction of the coolant stream. Supplied as ready-made hose assemblies with a BSP male threaded connection and a nozzle at the other end. Material: black PVC. Reinforcement: steel guide cover, with an additional spiral cover made of nickel-plated sheet steel up to DN 10. Working pressure: 4 bar. Working temperature: up to +80°C.
        • Hose for UV printing inks, TYGON® Ink 1000
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          New printing technologies widely introduced in recent years - digital printing, inkjet printing, wide-format printing, packaging printing and 3D printing - use modern UV-curable printing inks (UV inks, UV Ink) containing chemical components that are significantly more aggressive than traditional water- or solvent-based inks. UV inks contain aggressive acrylic monomers that, upon polymerization, form the binder of the ink or the 3D material; commonly used monomers include e.g. IBOA, HDDA, VCAP, VMOX, VEEA, ACMO. UV inks and materials are fed to the print head nozzles at a temperature of 40°C ÷ 50°C and have varying viscosity, from high for 3D printing to low for wide-format printing. Hoses feeding UV ink must have excellent chemical resistance to the ink components, both on the inner and outer side (immersion in the ink). Because the ink thickens and cures under UV radiation, the hose should completely block UV radiation (UV blocking) at wavelengths of 280–400 nm. The mechanical properties of the hose for use in printing machines are also very important: its flexibility, defined as the minimum bend radius and the force needed to bend it, must not be too great, due to the complex shape of its installation for mounting in the print head, and the need for cleaning and disassembly when replacing ink cartridges and during other maintenance activities. Fatigue resistance to bending is especially important in large-format printing, due to the large and fast movements of the print head. Transverse flexibility of the hose, in turn, is important for ease of fitting it onto fittings (the force required to push the fitting in) while maintaining the proper degree of hose clamping on the fitting, for tightness and reliability of the connection. The two-layer TYGON® Ink 1000 hose was developed to optimize all these properties and is characterized by exceptional chemical resistance to commonly used acrylic monomers, UV radiation blocking, flexibility and elasticity, and long service life. Used for all kinds of modern printing systems, such as: digital printing; inkjet printing; wide format printing; packaging printing; 3D printing. Maximum working pressure is given for a temperature of 23°C. Material: polyolefin. Operating temperature: up to +5°C. Inner hardness: 98 Shore (A). Outer hardness: 90 Shore (A). Density: 0.92 g/cm³. Note: Product packed in the Tubes International CLEAN ROOM Clean Zone under strict cleanliness standards. Product is non-returnable.
        • Hose for paints and solvents with antistatic wire PAINT SPRAY PA-M
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-quality German-made delivery hose with an inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures easy cleaning. Outer layer of NBR rubber, resistant to ozone, weather conditions and UV radiation. The hose is designed for adhesives, varnish, oil, paints, polar and aromatic solvents. The hose has two copper anti-static wires built into the braid, ensuring (when properly connected to metal fittings) conductivity of the hose assembly (R
        • Hose for paints and varnishes NR SPRAY C
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Rubber delivery hose with inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures easy cleaning. Smooth outer layer made of synthetic rubber, resistant to contact with chemicals and oil (ARPM Class B). A hose for many industrial applications, such as paint transfer and agricultural spraying. The good resistance of polyamide allows the hose to be used for paints, varnishes, solvents, adhesives and resins, oils, petrochemical substances and other chemicals. Anti-electrostatic properties of the hose are not declared. Inner layer: polyamide (PA), silicone-free. Reinforcement: textile braid: single for 1/4" and 3/8", double from 1/2" up. Outer layer: black synthetic rubber. Operating temperature: from -20°C to +90°C. Checking chemical resistance: PA chemical resistance table (preliminary selection), confirmation of resistance and conditions of use by Tubes International (in particular for temperatures above 50°C). Assembly: fittings with a nipple (hose tail) of a diameter matched to the hose, without sharp or high barbs that could cut or damage the inner polyamide layer when clamped, should be used. Assembly with bands, clamps or crimp sleeves.
        • Hose for steam humidifiers in air conditioning systems CONDITIONER HUMIDIFIER®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Specialist hose designed for conveying low-temperature steam to humidifiers in industrial air conditioning equipment. Soft and flexible, odourless, resistant to steam, hot water and condensate. Inner layer: white, odourless butyl rubber (IIR). Reinforcement: synthetic cord. Outer layer: white, odourless butyl rubber (IIR). Working temperature: from -30°C to +110°C.
        • Low-spallation hose for peristaltic pumps for biopharmaceutical applications PHARMA PURE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality, flexible hose in a natural white colour, made of multilayer thermoplastic elastomer, designed specifically for the pharmaceutical industry, biotechnology and laboratories. A unique feature of this hose is its very high resistance to spallation (the shedding of microscopic particles of hose material under pressure from the peristaltic pump rotor), ensuring very high fluid purity. Offers high fatigue resistance and an exceptionally long service life in peristaltic pumps, many times longer than any silicone hose (1000 h). Also features very low gas permeability and low absorption of the conveyed products. Ideal for cell culture harvesting and cultivation in vitro, vaccine production, bioreactors, sterile filling lines, fermentation, extraction and purification processes. The opaque hose wall protects sensitive products from UV radiation. Biocompatible - meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.2.9. Hygienic properties are confirmed by the Saint-Gobain validation guide for this hose. Complies with RoHS 2011/65/EU and REACH 1907/2006/EU. Suitable for repeated steam, ethylene oxide or radiation sterilisation (up to 2.5 Mrad – 25 kGray). Flame-resistant (UL 94 HB). Pressure safety factor 5:1. Assembly with special biopharmaceutical fittings and connectors is recommended. Maximum working pressure is specified at 23°C. Material: thermoplastic elastomer (TPE). Working temperature: from -40°C to +135°C. Brittleness temperature: -67°C. Hardness: 65 Shore (A). Density: 0.92 g/cm³.
        • Water hose for horticulture and industry MASTER PLUS
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          An exceptionally flexible water hose, even at low temperatures, designed for professional use in gardening and industry. Multilayer PVC construction. The double woven braid using NTS PLUS technology provides high pressure resistance, low expansion under pressure and resistance to the formation of kinks, bends and loops. The outer PVC layer is coated with a thin, transparent, glossy polymer (SKY TECH) that protects against UV radiation, is resistant to abrasion and cuts, and slides easily over surfaces. The hose's sturdy construction ensures long-lasting, trouble-free use. Phthalate-free (
        • Hose for high-purity applications, with low absorption and adsorption TYGON® 2475
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colourless, transparent, flexible hose for biopharmaceutical applications, completely free of plasticisers and oils. Used in the cosmetics industry, aseptic filling and dosing systems, diagnostic equipment, nuclear instrumentation, laboratory analysers and biotechnology for conveying cell and tissue cultures. Features hydrophobicity (non-wettability) and very low absorption and adsorption of water-based fluids compared with PVC, as well as lower gas permeability than silicone hoses, protecting sensitive fluids against oxidation. This minimises the risk of changes in fluid properties even with repeated hose use. The glass-smooth, non-porous inner surface prevents contaminants from depositing and adhering, facilitating complete fluid drainage and hose cleaning. Resistant to chemical cleaning agents and disinfectants. Offers good chemical resistance to a range of substances: acids, alkalis, salts, as well as alcohols and ketones. Not recommended for hydrocarbons. Meets USP Class VI requirements. Hygienic properties are confirmed by the Saint-Gobain validation guide for this hose. Suitable for ethylene oxide or radiation sterilisation (up to 4.5 kGy). Complies with RoHS 2011/65/EU and REACH 1907/2006/EU. Can be used as a single-use or reusable product. Disposal of used hoses does not release hazardous substances (e.g. chlorine); incineration produces only carbon dioxide and water. Pressure safety factor 5:1. Assembly on hose tails and fittings using clips and clamps. Maximum working pressure is specified at 23°C. Material: polyolefin. Maximum working temperature: up to +52°C. Brittleness temperature: -78°C. Hardness: 72 Shore (A). Density: 0.9 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM in compliance with strict cleanliness standards. Product is non-returnable.
        • Thin-walled BARRIER type freon hose, 6090
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Thin-walled BARRIER type freon hose, 6090

          All products | Hoses and fittings for air conditioning
          0 €
          A top-quality hose designed for automotive and industrial refrigeration and air-conditioning systems operating with R134a, R1234yf, R404A, R452A refrigerants, mineral oils and synthetic PAG, POE oils (for compressors). The outer layer is resistant to abrasion and weather conditions. Meets the requirements of SAE J2064 Type C Class I, SAE J3062 Type C Class I standards, General Motors: GMW14319, and complies with FORD specification: ESDS7H-19B591-AA. Assembly: use BURGACLIP (IT-73) quick-fit fittings or BU-6090 crimp fittings (IT-43, IT-44). Inner layer: black CIIR rubber coated with a layer of nylon (PA) and EPDM. Reinforcement: polyester braid. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -40°C to +135°C.
        • High-pressure capillary hose for chromatography (HPLC) VERSILON™ PEEK
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose designed specifically for high-performance liquid chromatography (HPLC - High-Performance Liquid Chromatography), where the liquid being analysed is fed through a narrow tube (capillary) at a high pressure of several hundred bar. VERSILON™ PEEK capillary hose made of polyetheretherketone (PEEK) provides an alternative to stainless steel tubes, offering good corrosion resistance and suitability for applications where contact between the analysed liquid and metal is undesirable. Polyetheretherketone (PEEK) has temperature resistance similar to PTFE, but is stronger and abrasion-resistant. VERSILON™ PEEK capillary hose can operate at working pressures up to 230 bar and is highly chemically resistant, dimensionally stable, flexible, easy to cut, smooth, resistant to leaching and steam. Flame-retardant (UL 94 V-0). In addition to chromatography, hose applications may include medicine, the chemical and pharmaceutical industries, semiconductor manufacturing, aviation and nuclear technology. Pressure safety factor 4:1. Due to the high pressure, special fittings from equipment manufacturers or chromatography fittings from the PRECISION FITTINGS range are used to connect the hose. The connection is made by compression on the outside diameter. Hose available on special order. Maximum working pressure is specified at 23°C. Material: polyetheretherketone (PEEK). Working temperature: from -60°C to +250°C (temporarily up to +310°C; working pressure above 100°C depends on temperature). Hardness: 75 Shore (A). Density: 1.31 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM in compliance with strict cleanliness standards. Product is non-returnable.
        • Composite hose for highly aggressive chemicals CHEMSTAR PTFE SG, SS
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses are available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Suction-delivery hose designed for transferring, unloading and loading highly aggressive chemicals for which the corrosion resistance of polypropylene is insufficient. Inner layer made of ECTFE (a fluoropolymer with high chemical resistance). Safety factor 4:1 (HD - Heavy Duty version - 5:1). Other hose versions are available on special request: with a black antistatic ATEX outer cover (compliant with Directive 94/9/EC), with polyurethane-coated fabric offering high abrasion resistance, with a PVDF-coated stainless steel inner helix and an inner layer of special film with excellent properties exceeding those of standard PTFE versions (working temperature: from -40°C to +125°C). Applications: loading and unloading systems, filling and emptying equipment (UNO), unloading and loading road and rail tankers, permanent equipment on road tankers, industrial installations. HD version - port loading and unloading systems (ship-to-shore and ship-to-ship). Standards: meets the requirements of EN 13765:2018 (type 2, type 3). Assembly: supplied as complete hose assemblies with fittings. Available versions: SG (AISI 316 stainless steel / galvanised steel), SS (AISI 316 stainless steel / AISI 316 stainless steel) - differing in the materials of the inner and outer helices. Inner layer: ECTFE (first film layer), polypropylene (second film layer). Reinforcement: inner / outer helix, polyethylene (fabric layers). Cover: abrasion- and weather-resistant polyester. Working temperature: from -30°C to +80°C, from -40°C to +100°C (HD version).
        • Composite hose for chemicals CHEMSTAR PG, PS, SS
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Suction-delivery hose designed for conveying, unloading and loading a wide range of hazardous chemicals: acids, alkalis and solvents under standard operating conditions. Safety factor 4:1 (HD - Heavy Duty version - 5:1). Applications: transfer systems, filling and emptying equipment (UNO), unloading and loading road and rail tankers, permanent equipment on road tankers, industrial installations. HD version - port transfer systems (ship-to-shore and ship-to-ship). Standards: meets the requirements of EN 13765:2018 (type 2), EN 13765:2018 (type 3). Assembly: supplied as complete hose assemblies with fittings. Available versions: PG, PS, SS - differing in the material of the internal and external helix. Inner layer: polypropylene (fabric and film layers). Reinforcement: internal / external helix; polyethylene (fabric layers). Cover: abrasion- and weather-resistant polyester. Working temperature: from -30°C to +80°C, from -40°C to +100°C (HD version).
        • Composite hose for transferring petrochemical products FUEL STAR GG, AG, AA
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Suction-delivery hose designed for conveying, unloading and loading petrochemical products including fuel oils, petrol, diesel fuels, lubricating oils and aromatic substances (up to 50%) under standard operating conditions. Safety factor 4:1 (HD - Heavy Duty version - 5:1). The AA version (aluminium internal and external helix) has significantly lower weight for easier hose handling. Applications: transfer systems, filling and emptying equipment (UNO), unloading and loading road and rail tankers, industrial installations, permanent equipment on road tankers. HD version - port transfer systems (ship-to-shore and ship-to-ship). Standards: meets the requirements of EN 13765:2018 (type 3 - HD version, type 2 - SD version). Assembly: supplied as complete hose assemblies with fittings. Available versions: GG (galvanised steel / galvanised steel), AG (aluminium / galvanised steel), AA (aluminium / aluminium) - differing in the material of the internal and external helix. Inner layer: polypropylene (fabric and film layers). Reinforcement: internal / external helix; polypropylene (fabric layers). Cover: abrasion- and weather-resistant polyester. Working temperature: from -30°C to +80°C; from -40°C to +100°C (HD version).
        • Laboratory hose for analytical micropumps TYGON® LMT-55 MICROBORE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colourless, crystal-clear, soft and flexible laboratory hose for versatile use. The MICROBORE version of TYGON® LMT-55 hose is an economical solution for analytical peristaltic micropumps in standard applications. Used for sampling, in automatic laboratory analysers and for dosing reagents. Characterised by excellent chemical resistance. The transparent wall allowing flow control, the glass-smooth internal surface minimising deposit formation and very low gas permeability are additional advantages of the hose. It is manufactured to strict dimensional tolerances batch to batch, which guarantees repeatability of results in laboratory testing. Non-toxic, odourless and tasteless, free of DEHP phthalates and BPA. Compliant with REACH 1907/2006/EU and RoHS 2011/65/EU regulations – contains no hazardous or prohibited substances. The hose is available in versions: with 2 stops, with 3 stops or without stops. Coloured stops are free of phthalates and are made using bioplasticisers. The colour combination of the stops allows identification of the hose size. Length of hose with 2 or 3 stops: 381 mm. Distance between stops: 152 mm. Versions with stops are sold in full packs of 12 pieces. Depending on stock availability, minimum order quantities (MOQ) of 120 or 240 pcs may apply. Length of hose without stops: 10 m. Depending on stock availability, minimum order quantities (MOQ) of 50 or 100 m may apply. Service life in a peristaltic pump of up to 100 h. If increased service life is required, consider the similar TYGON® E-LFL hose in the MICROBORE version – available on request. Material: PVC (special, DEHP-free). Operating temperature: up to +74°C. Brittleness temperature: -50°C. Hardness: 55 Shore (A). Density: 1.18 g/cm³. Note: The product is packed in the Tubes International CLEAN ROOM clean zone in compliance with strict cleanliness standards. The product is not subject to return.
        • Hose with excellent chemical resistance and inertness VERSILON™ SE-200
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colorless, crystal-clear, flexible chemical hose of two-layer construction with an inner layer of FEP fluoropolymer with unique chemical resistance and inertness. Features significantly greater flexibility than rigid hoses made entirely of PTFE or other fluoropolymers. The smooth inner layer, resistant and chemically inert, eliminates the risk of fluid contamination. Resistant to a wide range of chemical substances, from corrosive substances to MEK-based solvents. Contains no phthalates or BPA (Bisphenol A). Sterilization by ethylene oxide. Used in various industrial applications: chemical flow, production and packaging of paints, solvents and adhesives, for inks and toners, for photographic chemicals, fertilizers and pesticides, in semiconductor production. Compliant with REACH (2006/1907/EC) – contains no hazardous or banned substances. Pressure safety factor 5:1. Mounted on suitable nipples and fittings with a single barb using clamps and bands, taking care not to damage the inner FEP layer (see drawing below). We recommend that hose selection for chemical applications be made in consultation with Tubes International specialists. Maximum working pressure is given for a temperature of 23°C. Material: FEP / special PVC. Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66 Shore (A). Density: 1.21 g/cm3. Note: Product packed in the Tubes International CLEAN ROOM Clean Zone under strict cleanliness standards. Product is non-returnable.
        • Hose with high chemical and temperature resistance VERSILON™ F-5500-A
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality, black, opaque, flexible and soft fluoroelastomer rubber hose, which, thanks to its physical and chemical properties, can work in difficult conditions, including elevated temperatures (up to +204°C). Highly resistant to a range of aggressive chemicals: concentrated acids, hydrocarbons, alcohol, hot oil and fuels, solvents. Used, among others, for cleaning solvents (dry cleaning, solvent recovery systems). Suitable for peristaltic pumps. Resistant to ozone, sunlight and weather conditions. The opaque black hose wall fully protects light-sensitive substances. The hose's post-vulcanization heat treatment production process removes all residues and ensures minimal outgassing, required in vacuum and aerospace applications. Used in laboratories and general industrial applications. Compliant with RoHS 2011/65/EU. Pressure safety factor 5:1. Mounted on nipples and fittings using clamps and bands. We recommend that hose selection for chemical applications be made in consultation with Tubes International specialists. Maximum working pressure is given for a temperature of 23°C. Material: fluoroelastomer (FKM, viton). Maximum operating temperature: +204°C. Brittleness temperature: -51°C. Hardness: 60 Shore (A). Density: 1.90 g/cm3. Note: The product is packaged in the Tubes International CLEAN ROOM Clean Zone in compliance with strict cleanliness standards. The product is non-returnable.
        • Fuel hose for small engines, for fuel containing up to 10% ethanol TYGON® F4040-A
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Translucent, yellow, flexible hose designed specifically for fuel and lubricating oils. Resistant to swelling and hardening caused by hydrocarbons, significantly reducing the risk of cracking and leakage. Minimal extractability protects fuel purity, and a low permeation rate for aromatic substances protects the operator and the environment. Resistant to ozone and UV radiation. The hose's flexibility facilitates installation even in tight spaces. The translucent wall allows flow monitoring. The hose is resistant to most petroleum products and fuels (including those with up to 10% ethanol content) and can be used for petrol, kerosene, diesel and heating oil, lubricants, cutting coolants and glycol-based fluids. Widely used and proven in thousands of applications: small engines, automotive, recreational vehicles, garden mowers, chainsaws, coolant and lubrication systems, cutting and polishing equipment. Compliant with REACH and RoHS 2011/65/EU regulations. Pressure safety factor 5:1. Assembly on nipples and fittings using clamps and ties. The maximum working pressure is given for a temperature of 23°C. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -37°C. Hardness: 57 Shore (A). Density: 1.26 g/cm³. Note: The product is packed in the Tubes International CLEAN ROOM clean zone in compliance with strict cleanliness standards. The product is not subject to return.
        Go to Top