0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Silicone hose for food substances and beverages, VERSILON™ SPX-60 FB
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A soft and flexible peroxide-cured silicone hose, designed specifically for food substances and beverages. Designed for applications requiring flexibility, bend resistance and durability. A hose with optimized physical material properties: tensile strength, maximum elongation and compression set – for increased durability. The hose's very smooth inner surface minimizes the possibility of contaminant build-up during fluid flow. Specifically designed for pouring food liquids: coffee, tea, beverages and fruit juices. Used in the production and pouring of cosmetic fluids. Compliant with the RoHS 2011/65/EU material directive and the REACH 1907/2006/EU regulation - contains no hazardous or banned substances. Meets FDA 21 CFR 177.2600 requirements. Compliant with European requirements 1935/2004/EC, 10/2011/EU (simulant liquids B and D1 – for hydrated, acidic and dairy products) and 2023/2006/EC (GMP). Can be sterilized by steam (18 min, 1 bar, +134°C), ethylene oxide, or radiation (up to 2.5 Mrad). Pressure safety factor 5:1. Mounted on nipples and fittings without sharp barbs using clamps and bands. Inner layer: translucent silicone. Hardness: 61 ± 4 Shore (A). Density: 1.16 g/cm3. Operating temperature: from -50°C to +200°C.
        • Silicone hose for biotechnological applications, hardness 65 Shore (A), Sani-Tech® STHT®-65
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality platinum-cured silicone hose intended for biotechnological applications. Made of ultra-pure, biopharmaceutical-grade silicone with a hardness of 65 Shore (A). The hose is manufactured in a certified class 7 clean room with full process and product traceability – the batch number is laser-marked on the hose. Very flexible, with an exceptionally smooth internal and external surface. Resistant to high temperatures, ozone, radiation, moisture and weather conditions. Does not adsorb or absorb odour or taste. Used for sterile filling and flow of substances requiring high purity: blood-derived products, medicines, cell cultures, laboratory fluids, biopharmaceutical processing products. Can be repeatedly sterilised in an autoclave, as well as with ethylene oxide or by radiation (up to 5.0 Mrad - 50 Kgray). Biocompatible – meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.1.9. Hygienic properties are confirmed by the BPOG extractables report and the Saint-Gobain validation guide for this hose. Compliant with RoHS 2011/65/EU and REACH 1907/2006/EU. Pressure safety factor 5:1. Recommended assembly with special biopharmaceutical fittings and connectors, e.g. Pure-Fit® or special systems with factory-integrated fittings (Sani-Tech® Sani-Link® Molded Assemblies, Sani-Tech® TA Tubing Assemblies). Available in other sizes on special order. Material: translucent silicone. Hardness: 65 Shore (A). Density: 1.21 g/cm³. Operating temperature: from -62°C to +260°C.
        • Silicone hose with extended service life for peristaltic pumps, Sani-Tech® ULTRA-C
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality, new-generation platinum-cured silicone hose intended for biotechnology applications, with minimized extractables and extended service life in peristaltic pumps. Made of ultra-pure biopharmaceutical-grade silicone. The hose is manufactured in a certified class 7 cleanroom with full process and product traceability – the batch number is laser-marked on the hose. Very flexible, with an extremely smooth inner and outer surface. Resistant to high temperatures, ozone, radiation, moisture, and atmospheric conditions. Does not adsorb or absorb odour or taste. Used for sterile filling, flow and operation in peristaltic pumps of substances requiring high purity: blood-derived products, medicines, cell cultures, laboratory fluids, biopharmaceutical processing products. Can be repeatedly sterilized in an autoclave, as well as with ethylene oxide or radiation (up to 5.0 Mrad - 50 Kgray). Biocompatible – meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.1.9. Hygienic properties confirmed by the BPOG extractables report and the Saint-Gobain validation guide for this hose. Very low total organic carbon (TOC) level. Compliant with RoHS 2011/65/EU and REACH 1907/2006/EU. Pressure safety factor 5:1. Recommended assembly with special biopharmaceutical fittings and connectors, e.g. Pure-Fit® or special systems with factory-integrated fittings Sani-Tech® Sani-Link® Molded Assemblies and Sani-Tech® TA Tubing Assemblies. A version of the hose with a hardness of 65 Shore (A) is available on special order. Material: translucent silicone. Hardness: 50 Shore (A). Density: 1.14 g/cm³. Operating temperature: from -62°C to +260°C.
        • Platinum-cured silicone delivery and suction-delivery hose, CLEARWAY PLATINUM D and SD
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-quality platinum-cured silicone hose. Available in two design versions: CLEARWAY PLATINUM D – a delivery hose, without a steel helix, CLEARWAY PLATINUM SD – a suction-and-delivery hose, with a steel helix. These versions have reinforcement made of spirally arranged layers of high-strength, light, white synthetic fabric. The CLEARWAY PLATINUM hose features a smooth, non-stick, pore-free internal surface, preventing the deposition of product particles and bacterial growth and facilitating hose cleaning. The outer layer is smooth, minimally corrugated for the version with a helix, and easy to clean with a mild detergent. The hose is intended for transferring high-purity products, food substances, and liquids with an alcohol content of up to 96%. Widely used in the food, pharmaceutical and cosmetics industries. Hose material: translucent silicone (PT3362) of food and pharmaceutical grade, odourless and tasteless. Meets hygienic and food-contact requirements: FDA, BfR, European Pharmacopoeia 3.1.9, USP Class VI, 3-A, ISO 10993, D.M. 21/03/73 (Italy), Arrete du 25 Novembre 1992 (France). Compliant with European requirements 1935/2004/EC, 2023/2006/EC (GMP), tested with simulant fluids B and D1 (for hydrated, acidic and dairy products). The hose is manufactured in a certified class 8 clean room (ISO 14644-1) with full process traceability. The manufacturing process is free of substances of animal origin, phthalates, adipates, nitrosamines and restricted materials, compliant with the RoHS 2011/65/EU material directive and REACH 1907/2006/EU regulation. Sterilisation: steam at max. +135°C under a pressure of 3.5 bar for max. 90 min, or hot air at max. +200°C for max. 30 min. To avoid impairing the mechanical properties of the hose, sterilisation should not be repeated earlier than one hour after the last cleaning. Cleaning: water up to 95°C; sodium hydroxide 1%, 80°C; nitric/phosphoric/peracetic acid 1%, 20°C; hydrochloric acid, sodium hypochlorite 200 ppm, 80°C, max. 20 min. Inner layer: translucent silicone. Reinforcement: polyester fabric layers, AISI 302 steel helix (SD version only). Outer layer: translucent silicone. Operating temperature: from -60°C to +200°C.
        • Reinforced silicone hose for biotechnological applications, Sani-Tech® STHT®-R
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Top-quality, platinum-cured silicone pressure hose designed for biotechnology applications. Made of ultra-pure biopharmaceutical-grade silicone with a hardness of 65 (as in STHT-65 hose), reinforced with high-strength braid. The hose is manufactured in a certified class 7 cleanroom with full process and product traceability. Highly flexible, with exceptionally smooth inner and outer surfaces. Resistant to high temperatures, ozone, radiation, moisture and weathering. Does not adsorb odour or taste. Used for sterile filling and transfer of substances requiring high purity: blood-derived products, medicines, cell cultures, laboratory fluids and biopharmaceutical processing products. Can be repeatedly sterilised in an autoclave (particularly recommended), as well as with ethylene oxide or radiation (up to 5.0 Mrad - 50 Kgray). Must not be used for continuous steam service. Not recommended for use with hot oil or acids. Biocompatible - meets the requirements of USP Class VI, and/or USP, and/or ISO 10993-5, European Pharmacopoeia 3.1.9. Hygienic properties are confirmed by the BPOG extractables report and the Saint-Gobain validation guide for this hose. Assembly - with AISI 316 steel hygienic fittings crimped using ferrules, or with special plastic hygienic fittings, crimped or welded / vulcanised. Recommended pressure safety factor 4:1. Material: translucent silicone. Reinforcement: textile braid. Hardness: 65 Shore (A). Density: 1.21 g/cm³. Working temperature: from -62°C to +260°C.
        • Welding hose for acetylene, CODAN 2801 ACETYLEN, ISO 3821
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, smooth acetylene hose, compliant with EN ISO 3821. For use with industrial autogenous welding equipment, usually together with a blue oxygen hose. Can also be used for natural gas and air. Inner layer: black EPDM rubber. Reinforcement: polyester. Outer layer: red EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +80°C.
        • Ribbed welding hose for acetylene, CODAN 2813 ACETYLEN, ISO 3821
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, ribbed acetylene hose compliant with EN ISO 3821 standard. The ribbed surface allows the hose to be easily dragged along the floor and prevents it from getting dirty. For transporting acetylene in oxy-fuel welding equipment used in industrial plants, shipyards, construction sites, etc. Due to its low weight, the hose is also ideal for compressed air. Inner layer: black EPDM rubber. Reinforcement: polyester. Outer layer: red EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C.
        • Temperature-resistant food hose for peristaltic pumps TYGON® E-65-F
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          White, flexible universal hose made of a special thermoplastic elastomer (TPE). Hose with exceptional resistance to ageing, weather conditions, UV radiation and ozone, with good chemical resistance. Extremely flexible and elastic, kink-resistant, retains its shape during easy and quick installation. Hose with high fatigue resistance to deformation, resistant to abrasion and cracking. Excellent for operation in peristaltic pumps. Resistant to repeated sterilization (up to five times without changing the hose's service life). Used for transferring and dosing cleaning chemicals in industry and services in CIP (Clean-in-Place) and SIP (Steam-in-Place) sterilization systems, and for universal industrial and laboratory applications. The soft hose material is very elastic and provides excellent service life of over 1000 hours of operation in a peristaltic pump. The hose is a favourable alternative to the commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemical substances, especially acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite or ozone. It is characterized by low gas permeability compared to rubber hoses. Meets European hygiene and food contact requirements: 1935/2004/EC and 10/2011/EU (simulant liquids B and D1, hydrated food, over 20% alcohol and dairy products – time and temperature according to certificate). Meets American FDA 21 CFR 177.2600, NSF-51 requirements. Compliant with REACH 1907/2006/EU regulation – contains no hazardous or banned substances. Can be sterilized with steam, ethylene oxide or radiation. Pressure safety factor 5:1. Assembly on nipples and fittings using clamps and bands. Maximum working pressure is given for a temperature of 23°C. Material: thermoplastic styrenic elastomer (TPE). Operating temperature: from -80°C to +121°C. Hardness: 65 Shore (A). Density: 0.89 g/cm³. Note: Product packed in the Tubes International CLEAN ROOM Clean Zone in compliance with strict cleanliness standards. Product is non-returnable.
        • Hydroformed steel hose for high pressures HP / THP / XHP
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. For an individual quotation, use the enquiry form in the shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Special high-pressure steel hose with an increased wall thickness and closely spaced annular corrugations formed by hydroforming. Designed for chemicals, gases and steam under pressure and under high vacuum. Designed in accordance with EN ISO 10380 requirements. Supplied to order with fittings for steel hoses. For use at elevated temperatures, the working pressure must be reduced using the temperature correction factor according to EN ISO 10380 (details attached). Safety factor 4:1 (for dynamic conditions). The specified working pressure applies to dynamic conditions. Inner layer: corrugated AISI 316L steel hose, with DN 32 and DN 100 diameters made from AISI 321 steel. Reinforcement: single AISI 304 steel braid. Working temperature: from -273°C to +600°C (working pressure depends on temperature).
        • Highly flexible hydroformed steel hose compliant with EN ISO 10380 PARRAP®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Top-quality, flexible and exceptionally pliable stainless steel hose manufactured in France. Annularly corrugated hose with a special corrugation shape (“omega”), manufactured by hydroforming across the entire diameter range. Bending radius approximately 25% smaller (better) than that of PARNOR hose and the requirements of ISO 10380. Available with a single or double high-strength braid, or without braid. Designed for conveying liquids and gases under pressure: water, steam, air, hot oil and chemicals, as well as for operation under high vacuum. Safety factor 4:1. Recommended for all critical industrial applications and dynamic applications, providing very high flexibility, reliability and long service life even under demanding operating conditions. Used in the chemical and petrochemical industries, nuclear power generation, shipbuilding, cryogenic technology, air conditioning and the food industry, among others. Supplied as complete hose assemblies (hoses) with welded fittings, according to the customer's order. Inner layer: corrugated hose made from AISI 321 or AISI 316L stainless steel sheet. Reinforcement: single or double AISI 304 steel braid. Working temperature: from -273°C to +600°C (working pressure depends on temperature).
        • Hydroformed steel hose compliant with EN ISO 10380 PARNOR®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hoses available only as complete hose assemblies with fittings crimped by Tubes International. For an individual quotation, use the enquiry form in the shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com Top-quality flexible and pliable stainless steel hose manufactured in France. Annularly corrugated hose with standard corrugation pitch and shape, manufactured by hydroforming across the full range of diameters. Available with single or double dense, high-strength braid, or without braid. Designed for conveying liquids and gases under pressure: water, steam, air, hot oil and chemicals, as well as for operation under high vacuum. Safety factor 4:1. Recommended for all critical industrial applications, providing high flexibility, reliability and long service life even under demanding operating conditions. Used in the chemical and petrochemical industries, nuclear power engineering, shipbuilding, cryogenic technology, air conditioning and the food industry, among others. Supplied as complete hose assemblies with welded fittings, according to the customer's order. Inner layer: corrugated hose made from AISI 321 or AISI 316L stainless steel sheet. Reinforcement: single or double AISI 304 steel braid. Working temperature: from -273°C to +600°C (working pressure depends on temperature).
        • Hot air delivery hose SAHARA® BN-PRO
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hot air delivery hose SAHARA® BN-PRO

          Air and water hoses | All products
          0 €
          SAHARA® BN-PRO discharge hose is designed for conveying hot, dry air from a compressor to a tanker installation. The construction based on a thick, flexible wall ensures high resistance to kinking and durability in demanding working conditions. The inner layer is made of a special EPR rubber compound, characterized by increased resistance to hot air. The hose is used in road tankers for transporting bulk materials such as cement or feed, in product aeration systems and other industrial installations. The outer layer is resistant to ozone and weather factors. Inner layer: white EPR rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Operating temperature: from -40°C to +200°C (momentarily up to +240°C).
        • Braided hose for high-purity applications, with low absorption and adsorption TYGON® 2475 IB
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colourless, transparent, flexible hose reinforced with polyester braid for biopharmaceutical applications, completely free of plasticisers and oils. Designed for higher pressures, e.g. in single-use ultrafiltration / diafiltration systems, chromatography, water for injection (WFI), deionised water, pharmaceutical and cosmetic substances. Features hydrophobicity (non-wettability) and very low absorption and adsorption of water-based fluids compared with PVC, as well as lower gas permeability than silicone hoses, protecting sensitive fluids against oxidation. This minimises the risk of changes in fluid properties even with repeated hose use. The glass-smooth, non-porous inner surface prevents contaminants from depositing and adhering, facilitating complete fluid drainage and hose cleaning. Resistant to chemical cleaning agents and disinfectants. Offers good chemical resistance to a range of substances: acids, alkalis, salts, as well as alcohols and ketones. Not recommended for hydrocarbons. Meets USP Class VI requirements. Hygienic properties are confirmed by the Saint-Gobain validation guide for this hose. Suitable for ethylene oxide or radiation sterilisation (up to 4.5 kGy). Complies with RoHS 2011/65/EU and REACH 1907/2006/EU. Can be used as a single-use or reusable product. Disposal of used hoses does not release hazardous substances (e.g. chlorine); incineration produces only carbon dioxide and water. Pressure safety factor 4:1. Assembly on hose tails and fittings using clips and clamps. Maximum working pressure is specified at 23°C. Material: polyolefin. Maximum working temperature: up to +52°C. Brittleness temperature: -78°C. Hardness: 72 Shore (A). Density: 0.9 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM in compliance with strict cleanliness standards. Product is non-returnable
        • Polyolefin hose for a wide range of applications VERSILON™ 2001
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible, chemically resistant hose. Offers almost twice the service life of typical PVC hoses in peristaltic pump applications. It also provides good chemical resistance to a range of aggressive chemicals, such as polar solvents and corrosive media (acids, alkalis, salts, alcohols). It is durable and does not wear out over time, requiring less frequent replacement and helping avoid production downtime. Suitable for a wide range of uses, including demanding applications. Used for filling and portioning products, dispensing soap and detergents, water treatment lines, and transferring ink and chemicals. Ideal for analytical equipment, condensers, incubators, desiccators, and as a gas and drainage hose. High transparency provides clear visibility of flow. Free from plasticisers and oils - does not alter the properties of the conveyed media. Suitable for analytical testing. Proper incineration of used hoses does not release hazardous substances (e.g. hydrogen chloride). Meets US hygiene and food contact requirements FDA 21 CFR 177.2600. Can be sterilised with ethylene oxide or radiation (up to 2.5 Mrad). Compliant with REACH (2006/1907/EC) – contains no hazardous or prohibited substances. Pressure safety factor 5:1. Installed on hose tails and fittings using hose clips and clamps. We recommend consulting Tubes International specialists when selecting a hose for chemical applications. Maximum working pressure is specified at 23°C. Material: polyolefin. Working temperature: from -73°C to +57°C. Brittleness temperature: -78°C. Hardness: 69 Shore (A). Density: 0.88 g/cm³. Note: Product prepared in the Tubes International CLEAN ROOM under strict cleanliness standards. This product is non-returnable.
        • Flow shut-off clamp for biopharmaceutical hoses, Pure-Fit® Tube Clamps TC / TCL
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pure-Fit® TC hose clamp, shutting off flow in the hose by pinching its walls, for biopharmaceutical applications. Has a push-button locking system that eliminates the possibility of hose damage, protection against accidental release, and a side release mechanism enabling safe one-handed assembly and operation. The innovative clamp design allows complete flow shut-off. The clamp can be threaded onto the hose or fitted onto a hose already installed in an existing system. The Pure-Fit® TC clamp is available in two sizes, suitable for hoses with an outer diameter from 3.2 to 9.5 mm and from 9.5 to 19.1 mm. The large Pure-Fit® TCL clamp, in turn, is suitable for hoses with an outer diameter from 19.1 to 50.8 mm and is available for hoses with a wall thickness from 1.6 to 3.2 mm and from 3.2 to 6.4 mm. It has the same functional features but is intended for larger-diameter, thicker-walled hoses, standard and braid-reinforced or multilayer. In addition to complete flow shut-off, it can also be used in an intermediate setting for correspondingly reduced flow. Pure-Fit® TC and TCL clamps are made of materials compliant with USP Class VI, and/or USP, and/or ISO 10993-5 requirements. Sterilization: radiation (PP) or radiation and autoclave (PVDF). Material: polypropylene (PP) or PVDF. Operating temperature: up to 93°C (PP) or up to 130°C (PVDF).
        • Adjustable clamp for biopharmaceutical hoses, Pure-Fit® Tru Valve
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          An innovative hose pinch valve that can be fitted onto already installed hoses. Allows flow regulation using a calibrated scale on both sides as well as complete flow shut-off. The Pure-Fit® Tru Valve is designed not only for metering fluid flow but also as an effective and safe method for closing and disconnecting a hose system during a steam sterilization (SIP) cycle. Sterilization: radiation and autoclave. Material: reinforced polyamide. Hose outer diameter: 3.2 ÷ 15.9 mm.
        • Coil of coolant hose, system 1/4", LOC-LINE®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coil of coolant hose in the 1/4" system, made of acetal resistant to corrosion, solvents, oils and greases, providing hose rigidity and resilience. Designed for low-pressure conveying of air, water, oils and other substances used in cooling processes and metalworking. Resistant to abrasion and vibration, ensures 100% positional stability and does not damage cutting tools. Modular construction that is very easy to extend. Standard length: 15.20 m. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1136 l/godz. Working temperature: up to +76°C.
        • Coupling for aseptic connection outside the clean area, Pure-Fit® SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          The Pure-Fit® SC (Secure Connections) coupling enables completely sterile connection of hoses outside a clean environment (cleanroom). The coupling consists of two parts – a plug and a socket. It has hose "tails" made using Pure-Fit® SIB® (Smooth Inner Bore) technology, ensuring complete connection tightness while providing a smooth, stepless transition between the inner surface of the hose and the inside of the fitting tail. Mounted onto the hose with Pure-Fit® SIB® ferrules. The socket and plug, once mounted on the hoses, are joined in a three-stage secured sequence of operations, eliminating the possibility of operator error. The red protective caps are removed in sequence, the flexible silicone valves (V) are joined face to face without leaving a dead space, the plug (F) slides inside the housing (P), moving deep into the socket (C), bending and opening the flexible silicone valves (V), ensuring a large, undisturbed flow (see diagram). The coupling is available in five "tail" sizes and can be joined together in two size configurations: 1/4", 3/8" and 1/2", and 3/4" and 1". Made of materials free of animal-derived substances (ADCF) and containing no BPA (Bisphenol A). Meets the requirements of USP Class VI and/or USP and/or ISO 10993-5 and European Pharmacopoeia 3.1.9. Supplied in double packaging, non-sterile. Can be sterilized by radiation up to 5.0 Mrad (50 kGy) or by autoclave (134°C, 60 min). Material: PVDF - body, silicone (platinum) - valve, C-flex® (TPE) - caps. Storage temperature: from -40°C to +25°C. Operating temperature: from 0°C to +40°C.
        • Straight connector Pure-Fit® SIB®, polypropylene or PVDF, system BarbLock®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pure-Fit® straight connector is intended for Sani-Tech® STHT®, C-Flex® and PharMed® BPT biopharmaceutical hoses. It can also be used with other hoses of similar material (silicone, thermoplastic elastomer). The fitting is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, containing no BPA (Bisphenol A) or substances of animal origin. Hygienic properties are confirmed by the Saint-Gobain validation guide. The Pure-Fit® fitting should be mounted onto the hose using special fittings (BarbLock® system). The two parts of the fitting, slid onto each other, compress the hose around its entire circumference (360°), ensuring complete tightness of the connection, while providing a smooth, stepless transition between the hose's inner surface and the inside of the fitting's tail (Smooth Inner Bore). This eliminates turbulence and dead spaces – areas of flow stagnation that could become sites of bacterial growth. The use of Pure-Fit® fittings secured with Pure-Fit®/Barblock® fittings ensures significantly better tightness and hygienic properties of the connection compared to assembly with clamps. Sterilization: radiation (PP) or radiation and autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
        • Straight reducing connector Pure-Fit® SIB®, polypropylene or PVDF, system BarbLock®
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          The Pure-Fit® straight reducing connector is designed for Sani-Tech® STHT®, C-Flex® and PharMed® BPT biopharmaceutical hoses. It can be used for other hoses made of similar material (silicone, thermoplastic elastomer). The fitting is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting USP Class VI and/or USP and ISO 10993-5 hygiene requirements, containing no BPA (Bisphenol A) or animal-derived substances. Hygienic properties confirmed by the Saint-Gobain validation guide. The Pure-Fit® fitting should be mounted onto the hose using special ferrules (BarbLock® system). The two parts of the ferrule, slid together, compress the hose around its entire circumference (360°), ensuring complete connection tightness while providing a smooth, stepless transition between the inner surface of the hose and the inside of the fitting tail (Smooth Inner Bore). This eliminates turbulence and dead spaces - areas of flow stagnation that could become sites of bacterial growth. The use of Pure-Fit® fittings secured with Pure-Fit®/Barblock® ferrules ensures significantly better tightness and hygienic properties of the connection compared to clamp mounting. Sterilization: radiation (PP) or radiation and autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).
        Go to Top