0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -40 — -15

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 60 — 100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium – blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.

        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose welding for oxygen OXYGEN EN 559/ISO 3821

          All products | Technical gases hoses
          0 €
          Flexible hose welding for oxygen made acc. to standards ISO 3821. is characterized resistance on kinking and action conditions atmospheric. Not recommended for gases generated based on fuels, oils and gas LPG. Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: blue smooth rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for gas natural GWPB

          All products | Technical gases hoses
          0 €
          Flexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible, resistant to kinking and action conditions atmospheric hose welding for acetylene made acc. to standards ISO 3821. Not recommended for gases generated based on fuels, oils and propane - butane (LPG). Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: smooth red rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible hose delivery intended for conveying LPG (molten and gas) and gas natural. Layer outer resistant to action ozone and conditions atmospheric. antistatic (R 6 Ω/m). It has a copper wire ensuring electrical continuity between the hose ends. made in accordance with the standard EN 1762:2018, type D. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: black micro-perforated synthetic rubber. Working pressure: 25 bar. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose welding double TWIN HOSE

          All products | Technical gases hoses
          0 €
          Double hose welding for oxygen and acetylene. made according to standards ISO 3821. Inner layer: black synthetic rubber. Reinforcement: double polyester braid. Outer layer: smooth synthetic rubber in color red (acetylene) and blue (oxygen). Working pressure: 20 bar. Operating temperature: od -32°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for metallurgical lances oxygen OXYGEN/FV

          All products | Technical gases hoses
          0 €
          Thick, strong hose intended for lances oxygen in industry metallurgical. Layer outer self-extinguishing made in accordance with the standard ASTM C 542. Inner layer: black rubber CR. Reinforcement: double cord textile, spacer with fibre glass. Outer layer: yellow or blue rubber CR. Working pressure: 30 bar. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose welding for oxygen OXYGEN ISO 3821

          All products | Technical gases hoses
          0 €
          Light, flexible, smooth hose for oxygen, compliant with the standard EN ISO 3821. Do use with industrial equipment for welding autogenous, usually Together with red a hose acetylene. It can be used also for gas natural and air. Inner layer: black rubber SBR/EPDM. Reinforcement: PVA. Outer layer: blue EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses thermoplastic and hydraulic intended for gases high-pressure with thread internal G-3/4" (3/4" - BSP), Connection acc. to PN-81/M-69229 (DIN477-1 nr 9). purpose: oxygen, carbogen. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses thermoplastic and hydraulic rubber for gases high-pressure with thread internal Whitworth W21.8 x 1/14" L (thread left), Connection acc. to PN-81/M-69229 (DIN477-1 nr 1). purpose - m.in.: hydrogen, methane, other gases flammable. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses thermoplastic and hydraulic rubber for gases high-pressure with thread internal Whitworth W21.8 x 1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 6). purpose - mi.in.: ammonia, argon, dioxide carbon, hel. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses teflon HPG-HI for gases high-pressure with thread internal Whitworth W21.8 x 1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 6). purpose - mi.in.: ammonia, argon, dioxide carbon, hel. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses PTFE for gases high-pressure with thread internal Whitworth W24.32x1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 10). purpose - nitrogen. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses thermoplastic and hydraulic rubber for gases high-pressure with thread internal Whitworth W24.32x1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 10). purpose - nitrogen. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Twin welding hose for oxygen and acetylene, CODAN 2803 OXYGEN/ACETYLEN, ISO 3821
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, twin hose for oxygen and acetylene, compliant with EN ISO 3821 standard. For use with industrial gas welding equipment. A separating groove between the hoses allows for easy separation and simple attachment to a gas cylinder or welding torch. Also ideal for other applications, e.g. as an air inlet/outlet in sandblasting equipment. Inner layer: black EPDM rubber (acetylene hose), SBR/EPDM (oxygen hose). Reinforcement: polyester. Outer layer: blue EPDM rubber for oxygen, red EPDM rubber for acetylene. Working pressure: 20 bar. Operating temperature: from -30°C to +80°C.
        • Welding hose for acetylene, CODAN 2801 ACETYLEN, ISO 3821
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, smooth acetylene hose, compliant with EN ISO 3821. For use with industrial autogenous welding equipment, usually together with a blue oxygen hose. Can also be used for natural gas and air. Inner layer: black EPDM rubber. Reinforcement: polyester. Outer layer: red EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +80°C.
        • Ribbed welding hose for acetylene, CODAN 2813 ACETYLEN, ISO 3821
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, ribbed acetylene hose compliant with EN ISO 3821 standard. The ribbed surface allows the hose to be easily dragged along the floor and prevents it from getting dirty. For transporting acetylene in oxy-fuel welding equipment used in industrial plants, shipyards, construction sites, etc. Due to its low weight, the hose is also ideal for compressed air. Inner layer: black EPDM rubber. Reinforcement: polyester. Outer layer: red EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C.
        Go to Top