Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hydrophobic hose delivery made in accordance with technology improvement platinum. free of odour and taste. smooth surface prevents adhesion contaminants. sterilization steam in temperature +135°C, alternatively argon, cobalt. compliant with requirements FDA, USP kl.VI, European Pharmacopoeia 3.1.9 and directives EC 1935/2004 and EC 2023/2006 (GMP). Safety factor 3:1. Inner layer: semi-transparent silicone. Reinforcement: a polyester braid. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +200°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with rubber fluorine (fluorocarbon). length standard: 1000 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester + steel spiral (wall thickness wire 1.2 mm). Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic hydrocarbons aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of steel stainless intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter F on the end index means version FLOPPY, not maintaining shape. Material: steel AISI 304. Operating temperature: up to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of carbon steel intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter "F" on the end index means version FLOPPY, not maintaining shape. Material: galvanised carbon steel. Operating temperature: up to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible hose intended for conveying substances food, pharmaceutical and cosmetic: water, juices fruit, beer, wine, vinegar, alcohols o a concentration up to 96%, milk and its dairy products, creams, soaps, substances aromatic, pigments and other. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. extruded, completely smooth Layer inner and outer hose facilitates Flow rate and cleaning. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. use for high-proof alcohol (its vapours or other flammable substances) requires taking into account hazards associated with electricity static. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: a polyester braid. Working pressure: from 7 bar to 12 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 5182 l/h. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling hot liquid asphalt, tar, products bituminous. used for loading and unloading tankers road, railway, in plants masses bituminous and in ports. Inner layer: black blend polyacrylic. Reinforcement: cord with wire steel, steel spiral. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -15°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x140 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to oils, greases and hot chips hose intended for low-pressure feeding liquid or gas coolant at treatment metals. has tzw. memory shape, co allows on precision directing a stream substances cooling. supplied in the molds ready lines with connection with thread external BSP ending metric thread external. Material: black PVC. Reinforcement: steel A guard leading, Diameter DN 10 has additional spiral cover with nickel-plated sheet steel. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x15 cm or 100 cm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 1900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread internal NPT in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread internal NPT in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread internal NPT in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/2" LOC-LINE® made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. available length: 400 mm, 500 mm and 600 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/4" LOC-LINE® made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. available length: 400 mm, 500 mm and 600 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil line for coolant made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. Available in four sizes (Diameter bore 1/4", 3/8", 1/2" and 3/4"). Available length: 15 m. Material: acetal. Working pressure: up to 3 bar, depending on the diameter. maximum Flow rate: 1700 l/h, depending on the diameter. Operating temperature: up to +65°C.
