Is the High-Temperature Aramid SI CL Hose for Flue Gas, Fume, Gas & Dust Extraction up to 260°C suitable for continuous operation at 260°C?

High-Temperature Aramid SI CL Hose for Flue Gas, Fume, Gas & Dust Extraction up to 260°C Format is rated for operation in the temperature range -60°C to +260°C. However, the description does not explicitly state whether 260°C is a continuous operating temperature or a short-term peak limit. For safety and longevity, assume 260°C is the maximum allowable temperature (possibly short-term or peak). If you require continuous operation at 260°C, confirm with the manufacturer or supplier to verify continuous-duty rating, material creep/ageing data, and any required maintenance intervals or derating factors.

Can the High-Temperature Aramid SI CL Hose for Flue Gas, Fume, Gas & Dust Extraction up to 260°C be safely used with abrasive particulate matter and metal particles?

Yes — the High-Temperature Aramid SI CL Hose for Flue Gas, Fume, Gas & Dust Extraction up to 260°C can be used with abrasive particulate matter and metal particles, with some important caveats. Why it’s suitable: - The aramid fiber fabric with silicone impregnation provides high mechanical strength and excellent resistance to wear, vibration and impacts. - The external galvanized steel spiral delivers robust reinforcement against crushing and deformation under mechanical stress. - The hose is described as exceptionally resistant to mechanical stress and designed for demanding industrial use, which supports handling abrasive and metallic particulates at elevated temperatures (up to +260°C). Caveats and recommendations: - Abrasive and sharp metal particles will still cause progressive internal wear over time; life expectancy depends on particle size, hardness, concentration, flow velocity and application duty cycle. - For heavy, continuous abrasive service consider additional protective measures: sacrificial liners, harder internal coatings, more frequent inspection and maintenance, or selection of a dedicated abrasion-rated hose material. - Ensure correct diameter, flow velocity limits, and secure mounting with left-handed bridge clamps to avoid turbulence and localized wear. - For high-risk or regulatory critical applications (e.g., sparks, molten metal, explosive dusts) verify suitability with the manufacturer and consider spark/arcing protection, grounding and explosion-protection measures. Conclusion: Suitable for abrasive particulate and metal particle extraction in many industrial scenarios, but evaluate wear expectations and consider protective measures or alternative hoses for severe continuous abrasive service.

Hose for extraction and conveying exhaust gases, fumes, gases and dusts o high temperature up to 260°C ARAMID SI CL

All products, Ducting and ventilation hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-60
Vacuum resistance	yes
Standard length [m]	3
Reinforcement	external spiral made of galvanized steel wire and sheet metal

Light, pliable and flexible hose intended for extraction hot fumes, gases, dusts, discharge exhaust gases, air cooling and air blowing. used we all fields industry for applications high-temperature, especially in design machine, vehicles, equipment engines, use aviation and military. resistant to temperature, flame-retardant and very strength mechanical. is characterized excellent compressibility, very strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric with fibre aramid internal impregnated silver-grey silicone, o wall thickness 0.4 mm, externally green-grey. Reinforcement: type CLIP – outer spiral with wire and sheet steel galvanized left-handed. Operating temperature: od -60°C up to +260°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SC-ARAMID-CL-050	ARAMID HOSE SI CL 50 mm	50	0.9	In stock	Enquiry
SC-ARAMID-CL-060	ARAMID HOSE SI CL 60 mm	60	0.78	In stock	Enquiry
SC-ARAMID-CL-065	ARAMID HOSE SI CL 65 mm	65	0.7	In stock	Enquiry
SC-ARAMID-CL-070	ARAMID HOSE SI CL 70 mm	70	0.65	In stock	Enquiry
SC-ARAMID-CL-076	ARAMID HOSE SI CL 76 mm	75	0.62	In stock	Enquiry
SC-ARAMID-CL-080	ARAMID HOSE SI CL 80 mm	80	0.61	In stock	Enquiry
SC-ARAMID-CL-090	ARAMID HOSE SI CL 90 mm	90	0.56	In stock	Enquiry
SC-ARAMID-CL-102	ARAMID HOSE SI CL 102 mm	100	0.51	In stock	Enquiry
SC-ARAMID-CL-112	ARAMID HOSE SI CL 112 mm	110	0.45	In stock	Enquiry
SC-ARAMID-CL-120	ARAMID HOSE SI CL 120 mm	120	0.36	In stock	Enquiry
SC-ARAMID-CL-127	ARAMID HOSE SI CL 127 mm	125	0.33	In stock	Enquiry
SC-ARAMID-CL-140	ARAMID HOSE SI CL 140 mm	140	0.27	In stock	Enquiry
SC-ARAMID-CL-152	ARAMID HOSE SI CL 152 mm	150	0.22	In stock	Enquiry
SC-ARAMID-CL-160	ARAMID HOSE SI CL 160 mm	160	0.21	In stock	Enquiry
SC-ARAMID-CL-180	ARAMID HOSE SI CL 180 mm	180	0.17	In stock	Enquiry
SC-ARAMID-CL-203	ARAMID HOSE SI CL 203 mm	200	0.15	In stock	Enquiry
SC-ARAMID-CL-254	ARAMID HOSE SI CL 254 mm	250	0.1	In stock	Enquiry
SC-ARAMID-CL-305	ARAMID HOSE SI CL 305 mm	300	0.07	In stock	Enquiry
SC-ARAMID-CL-350	ARAMID HOSE SI CL 350 mm	350	0.06	In stock	Enquiry
SC-ARAMID-CL-407	ARAMID HOSE SI CL 407 mm	400	0.04	In stock	Enquiry
SC-ARAMID-CL-508	ARAMID HOSE SI CL 508 mm	500	0.04	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light, pliable and flexible hose intended for extraction hot fumes, gases, dusts, discharge exhaust gases, air cooling and air blowing. used we all fields industry for applications high-temperature, especially in design machine, vehicles, equipment engines, use aviation and military. resistant to temperature, flame-retardant and very strength mechanical. is characterized excellent compressibility, very strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric with fibre aramid internal impregnated silver-grey silicone, o wall thickness 0.4 mm, externally green-grey. Reinforcement: type CLIP – outer spiral with wire and sheet steel galvanized left-handed. Operating temperature: od -60°C up to +260°C.

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-60
Vacuum resistance	yes
Standard length [m]	3
Reinforcement	external spiral made of galvanized steel wire and sheet metal