Can the High-pressure air regulator 60 bar with gauge, DN12 size maintain stable output pressure under fluctuating air consumption?

Yes. The High-pressure air regulator 60 bar with gauge, DN12 size is designed to maintain a stable output pressure even under fluctuating air consumption. Its piston-type pressure reducing mechanism with integrated manometer ensures reliable pressure regulation, and it is explicitly specified to maintain stable working pressure with varying medium consumption. The unit supports adjustable output pressures from 0.5 to 50 bar (depending on version), accepts supply pressures up to 60 bar, and delivers high flow rates (up to 2000 l/min for 1/4" and 2500 l/min for 3/8" at 20 bar input, Δp = 4 bar), making it suitable for demanding applications where consumption varies. Operating temperature range −10°C to +90°C and robust brass construction further support consistent performance.

How does the High-pressure air regulator 60 bar with gauge, DN12 size perform at low temperatures (-10°C) compared to room temperature?

The High-pressure air regulator 60 bar with gauge, DN12 size is specified for an operating temperature range of -10°C to +90°C, so at -10°C it remains within its rated limits and should function correctly. Expect stable pressure regulation and reliable gauge readings similar to room temperature, provided the unit is properly installed and the medium is dry and free of contaminants that could freeze or thicken at low temperature. Practical considerations at -10°C compared to room temperature: - Response and regulation: Core piston-type mechanism continues to deliver stable output pressure; minor changes in material elasticity may cause slightly different feel or small variation in hysteresis but performance remains within specifications. - Flow capacity: Rated flow figures (up to 2000 l/min for 1/4" and 2500 l/min for 3/8" at 20 bar input, Δp = 4 bar) are valid at standard test conditions; cold air density is higher, so mass flow may increase slightly for the same volumetric flow—practical effect is minimal for most applications. - Seals and wear: Low temperatures can stiffen seals; long-term exposure near the lower limit may slightly accelerate wear if not using compatible seal materials. Manufacturer rating implies seals are suitable for -10°C. - Condensation/freezing risk: If moisture is present, water can condense and freeze, impairing operation. Use dry/filtered air or freeze protection for reliable low-temperature performance. Summary: The regulator performs reliably at -10°C as it is rated for that temperature, with only minor possible effects on seal flexibility, feel, and freezing risks if moisture is present.

Valve reducing for compressed air high-pressure 60 bar, with pressure gauge, size DN12

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	90

Valve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN12. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1/4″ BSP female, 3/8″. Diameter disc pressure gauge: Ø63. Flow rate: 2000 l/min – 1/4″, 2500 l/min – 3/8″ (at an inlet pressure of 20 bar Δp = 4 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-302323	Reducer 60 bar DN 12, 1/4" BSP female, with pressure gauge, 0.5 ÷ 12 bar	-	-	In stock	Enquiry
EW-302324	Reducer 60 bar DN 12, 1/4" BSP female, with pressure gauge, 1 ÷ 20 bar	-	-	In stock	Enquiry
EW-302325	Reducer 60 bar DN 12, 1/4" BSP female, with pressure gauge, 2 ÷ 35 bar	-	-	In stock	Enquiry
EW-302326	Reducer 60 bar DN 12, 1/4" BSP female, with pressure gauge, 3 ÷ 50 bar	-	-	In stock	Enquiry
EW-302333	Reducer 60 bar DN 12, 3/8" BSP female, with pressure gauge, 0.5 ÷12 bar	-	-	In stock	Enquiry
EW-302334	Reducer 60 bar DN 12, 3/8" BSP female, with pressure gauge, 1 ÷ 20 bar	-	-	In stock	Enquiry
EW-302335	Reducer 60 bar DN 12, 3/8" BSP female, with pressure gauge, 2 ÷ 35 bar	-	-	In stock	Enquiry
EW-302336	Reducer 60 bar DN 12, 3/8" BSP female, with pressure gauge, 3 ÷ 50 bar	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Valve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN12. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1/4″ BSP female, 3/8″. Diameter disc pressure gauge: Ø63. Flow rate: 2000 l/min – 1/4″, 2500 l/min – 3/8″ (at an inlet pressure of 20 bar Δp = 4 bar).