How do I adjust and lock the flow on the MRF NMB Brass Pneumatic Throttle Valve, COMPACT "N" Series for bidirectional control?

To adjust and lock the flow on the MRF NMB Brass Pneumatic Throttle Valve, COMPACT "N" Series for bidirectional control: 1. Ensure system pressure is within limits (≤10 bar) and lines are depressurized if required for safety. 2. Connect the pneumatic hoses using the plug-in connection. 3. For adjustment, turn the control knob (or use a screwdriver if provided) clockwise to reduce flow or counterclockwise to increase flow. Because the valve is bidirectional, adjust while observing actual flow during both filling and venting to achieve the desired rate in both directions. 4. Fine-tune slowly and monitor system performance and pressure to prevent unintended effects. 5. Once the desired flow is reached, tighten the locking nut to secure the setting and prevent accidental changes during operation. 6. Recheck flow after locking to confirm stable bidirectional regulation. The valve’s robust nickel-plated brass construction and available sizes (M5–1/2") support durable, precise control across -10°C to +70°C.

What maintenance is recommended to ensure long-term performance of the MRF NMB Brass Pneumatic Throttle Valve, COMPACT "N" Series?

To ensure long-term performance of the MRF NMB Brass Pneumatic Throttle Valve, COMPACT "N" Series, follow these maintenance recommendations: - Regular visual inspection: check for external damage, corrosion on the nickel-plated brass body, and secure seating of plug-in connections. - Clean connections and valve surfaces: remove dust, debris and oil residues to prevent contamination of pneumatic circuits and ensure reliable hose coupling. - Inspect and service plug-in fittings: verify that pneumatic hoses connect and release smoothly; replace worn or cracked tubing and seals to avoid leaks. - Leak testing: periodically pressurize the system (up to rated 10 bar) and check for leaks at threads, fittings and around the control knob; tighten or replace components as needed. - Verify adjustment mechanism: operate the control knob or screwdriver slot through full range to ensure smooth action; clean and lightly lubricate moving parts if stiff, using compatible pneumatic-grade lubricants. - Check locking nut: ensure the locking nut securely fixes the set flow; retighten to specification to prevent accidental setting changes. - Monitor operating conditions: avoid exposure beyond -10°C to +70°C and prevent pressure spikes above 10 bar to preserve seals and internal components. - Scheduled replacement: replace seals, O-rings or worn internals proactively based on operating hours and environmental severity to maintain precise bidirectional flow control. Following these steps will help maintain durability, prevent leaks, and preserve the precise regulation and reliability of the MRF NMB Brass Pneumatic Throttle Valve, COMPACT "N" Series.

Valve throttle pneumatic brass MRF NMB, series COMPACT “N”

All products, Pneumatic valves/

Additional information

Material	B – brass (bronze)

Valve throttle type MRF NMB series COMPACT “N” used for simultaneous adjustment flow in both directions – during filling and venting, used in systems pneumatic for adjustment rate flowing stream compressed air and direction flow. Equipped with a push-in connector ensuring easy disassembly of pneumatic lines. Setting adjustment by means of an adjustment knob and/or a screwdriver; possibility of securing the setting with a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. pressure working: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: brass nickel-plated.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-9031201B	MRF NMB throttling valve, 4 mm hose, GZ M5	-	10	In stock	Enquiry
MW-9031202B	MRF NMB throttling valve, 4 mm hose, GZ BSP 1/8"	-	10	In stock	Enquiry
MW-9031205B	MRF NMB throttling valve, 6 mm hose, GZ M5	-	10	In stock	Enquiry
MW-9031206B	MRF NMB throttling valve, 6 mm hose, GZ BSP 1/8"	-	10	In stock	Enquiry
MW-9031207B	MRF NMB throttling valve, 6 mm hose, GZ BSP 1/4"	-	10	In stock	Enquiry
MW-9031208B	MRF NMB throttling valve, 8 mm hose, GZ BSP 1/8"	-	10	In stock	Enquiry
MW-9031209B	MRF NMB throttling valve, 8 mm hose, GZ BSP 1/4"	-	10	In stock	Enquiry
MW-9031211B	MRF NMB throttling valve, 10 mm hose, GZ BSP 1/4"	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Valve throttle type MRF NMB series COMPACT “N” used for simultaneous adjustment flow in both directions – during filling and venting, used in systems pneumatic for adjustment rate flowing stream compressed air and direction flow. Equipped with a push-in connector ensuring easy disassembly of pneumatic lines. Setting adjustment by means of an adjustment knob and/or a screwdriver; possibility of securing the setting with a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. pressure working: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: brass nickel-plated.