- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling Hansen Beverage with valve and insert with plastic. insert with plastic has za task limitation quantity flowing through plug liquid and reducers noise produced during flow. coupling available in two versions: for gases type HB-2KGC with female thread 11/16″-18 UNF and for liquids type HB-2KLC with female thread 3/4″-18 UNF. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling CEJN 117 with thread internal and with valve intended for installation hydraulic o very high pressures. is sister version series 115, has such same parameters use however ich mutual connection is impossible. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. supplied standard with plastic a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Working pressure: 1000 bar (coupling connected). pressure bursting: 2600 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DIN type V with valve poppet and thread internal BSP. quick coupling of size 1/2" is compatible with quick coupling to the standard ISO-A index HQ-IA12-M-08G. used mainly in machines agricultural. Material: steel galvanized. Operating temperature: od -25°C up to +100°C. sealing: NBR. Working pressure: up to 375 bar (depending on size quick coupling). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature plug quick coupling DN1.5, without valve, with fitting for hose, for air, inert gases and liquids, where required are small dimensions. version bulkhead, for mounting panel. Available in two variants: with brass without coating and with brass coated nickel. Working pressure: 35 bar. Operating temperature: od -20°C for + 100°C. Material: brass or brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature plug quick coupling DN1.5, without valve, with thread external or internal metric, for air, inert gases and liquids, where required are small dimensions. Available in two variants: with brass without coating and with brass coated nickel. Working pressure: 35 bar. Operating temperature: od -20°C up to +100°C. Material: brass or brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature plug quick coupling DN1.5, without valve, with fitting for hose, for air, inert gases and liquids, where required are small dimensions. Available in two variants: with brass without coating and with brass coated nickel. Working pressure: 35 bar. Operating temperature: od -20°C up to +100°C. Material: brass or brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling single shut-off series 27KA DN 10 with thread external BSP. medium: compressed air, gases inert, water. Working pressure: 35 bar. Material: steel AISI 316Ti. sealing: FKM. Operating temperature: od -15°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling without valve, o standard profile EURO DN10, with thread external BSPT or with thread internal BSP, series 27KA. Working pressure: 35 bar. Material: steel hardened nickel-plated. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal plug quick coupling without valve DN10, with thread external BSP, BSPT or with thread internal BSP. series TEMA 1800, popular on the Scandinavian market, Intended for air and liquids. fittings series 1800 not should connect with the series 1800N. Material: hardened steel galvanized or steel AISI 316. Working pressure: 35 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling without valve, o standard profile EURO DN10, with fitting for hose, series 27KA. Working pressure: 35 bar. Material: steel hardened nickel-plated. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal plug quick coupling without valve DN10, with A fitting for hose. series TEMA 1800, popular on the Scandinavian market, Intended for air and liquids. fittings series 1800 not should connect with the series 1800N. Material: hardened steel galvanized. Working pressure: 35 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN12 with valve, with thread external or with thread internal BSP, series 57 KB, o high flow, for media liquid and gas. Working pressure: 35 bar. flow capacity: 3300 l/min, Pe=6 bar, Δp=0.5 bar - air, 73.5 l/min, Δp=1 bar, Kv=4.4 - water. Material: brass nickel-plated. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN12 with valve, with fitting for hose, series 57 KB, o high flow, for media liquid and gas. Working pressure: 35 bar. flow capacity: 3300 l/min, Pe=6 bar, Δp=0.5 bar - air, 73.5 l/min, Δp=1 bar, Kv=4.4 - water. Material: brass nickel-plated. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling o very small sizes DN 2.7 series 20KA, with fitting for hose. version bulkhead for mounting panel, single shut-off without valve. Intended for water, air, nitrogen and other non-flammable gases. pressure working: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling o very small sizes DN 2.7 series 20KA, with thread external or internal BSP or metric. version single shut-off without valve. intended for water, air, nitrogen and other non-flammable gases. Working pressure: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling o very small sizes DN 2.7 series 20KA, single shut-off without valve. plug occurs in two variants: with fitting for hose serrated and with fitting with a nut, for hose thermoplastic. intended for water, air, nitrogen and other non-flammable gases. Working pressure: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal plug quick coupling double shut-off, with thread internal BSP. intended primarily for liquids, to prevent leakage during disconnecting (for water, steam, oils and fuels).. straight in use, durable, is characterized good flow at small sizes external. fittings series 1100N not should connect with the series 1100. Material: brass chrome-nickel-plated (body), steel stainless (balls and spring). flow capacity: 9.5 l/min (Δp = 1 bar, Kv=0.57 - water), 430 l/min (Pe=6 bar, Δp=0.5 bar - air). Working pressure: 20 bar (for steam 10 bar). Operating temperature: od -20°C up to +100°C (NBR - standard), od -25°C up to +200°C (Viton - option), od -50°C up to +150°C (EPDM - option), depending on medium.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling of a free bore, Eurostandard DN5 (MINI), series 21KA with thread external or internal BSP or metric. Widely used in industry, where required are small dimensions at high flow capacity flow and small a drop pressure. operation one hand. Working pressure: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling of a free bore, Eurostandard DN5 (MINI), series 21KA. plug occurs in two variants: with fitting for hose serrated and with fitting with a nut, for hose thermoplastic. Widely used in industry, where required are small dimensions at high flow capacity flow and small a drop pressure. Working pressure: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling without valve, DN5.5 o profile compliant with with the standard ISO 6150B (A-A-59439, MIL C-4109), series 1400KA / 1423KA, with thread external BSPT or with thread internal BSP. high quality plug, versatile used in industry primarily for compressed air. Working pressure: 35 bar. Material: hardened steel, nickel-plated. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal plug quick coupling with thread external or with thread internal BSP, of a free bore, intended primarily for compressed air and gases, for smaller tools and systems pneumatic. straight in use, durable, is characterized good flow at small sizes external. fittings series 1100 not should connect with the series 1100N. Working pressure: 30 bar. Material: hardened steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling without valve, DN5.5 o profile compliant with with the standard ISO 6150B (A-A-59439, MIL C-4109), series 1400KA / 1423KA, with fitting for hose. high quality plug, versatile used in industry primarily for compressed air. Working pressure: 35 bar. Material: hardened steel, nickel-plated. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal plug quick coupling with fitting for hose, of a free bore, intended primarily for compressed air and gases, for smaller tools and systems pneumatic. straight in use, durable, is characterized good flow at small sizes external. fittings series 1100 not should connect with the series 1100N. Working pressure: 30 bar. Material: hardened steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal plug quick coupling with valve DN5.8, with thread internal BSP. double shut-off to the standard TEMA 1300N, popular on the Scandinavian market, intended primarily for liquids, to prevent leakage during disconnecting (for water, steam, oils and fuels). is characterized high resistance corrosion and high flow at small sizes external. fittings series 1300N not should connect with the series 1300. Material: nickel-plated and chrome-plated brass / steel AISI 316. flow capacity: 13.5 l/min (Δp = 1 bar, Kv = 0.81 - water), 760 l/min (Pe=6 bar, Δp=0.5 bar - air). Working pressure: 50 bar (for steam 10 bar). sealing: NBR / Viton. Operating temperature: od -20°C up to +100°C (NBR), od -25°C up to +200°C (Viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling o popular profile Eurostandard DN7.2 without valve, with thread external or internal BSP, intended primarily for air. quick coupling are interchangeable of all acc. to Eurostandard DN7.2 ÷ 7.8 other manufacturers. Working pressure: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling o popular profile Eurostandard DN7.2 without valve, with fitting for hose, intended primarily for air. occurs in three variants: with fitting for hose serrated, with fitting for hose thermoplastic with a nut and with fitting for hose thermoplastic with a nut and spring protective, protecting hose against abrasion, kinking, czy damage mechanical. quick coupling are interchangeable of all acc. to Eurostandard DN7.2 ÷ 7.8 other manufacturers. Working pressure: 35 bar. Material: brass. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal plug quick coupling of a free bore (without valve) DN7.4, with thread external BSP, BSPT or with thread internal BSP. intended primarily for compressed air and gases, for smaller and medium tools and systems pneumatic. fittings series 1300 not should connect with the series 1300N. Working pressure: 35 bar. Material: hardened steel galvanized, Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal plug quick coupling of a free bore (without valve) DN7.4, with fitting for hose. intended primarily for compressed air and gases, for smaller and medium tools and systems pneumatic. fittings series 1300 not should connect with the series 1300N. Working pressure: 35 bar. Material: hardened steel galvanized, Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN7.8 without valve, with thread external BSPT or internal BSP, intended for compressed air, liquids and gases. plug is interchangeable of all quick coupling acc. to Eurostandard DN7.2 other manufacturers. Working pressure: 35 bar. Material: steel hardened, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN7.8 without valve, with fitting for hose, intended for compressed air, liquids and gases. plug is interchangeable of all quick coupling acc. to Eurostandard DN7.2 other manufacturers. Working pressure: 35 bar. Material: steel hardened, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal plug quick coupling with valve DN9.5, with thread external NPT or with thread internal BSP. double shut-off, to the standard TEMA 1800N, popular on the Scandinavian market, intended primarily for liquids (for water, steam, oils and fuels) to prevent leakage during disconnecting. is characterized high resistance corrosion and high flow at small sizes external. fittings series 1800N not should connect with the series 1800. Material: chrome-plated brass or steel AISI 316. flow capacity: 34.7 l/min (Δp = 1 bar, Kv = 2.08 - water), 1650 l/min (Pe=6 bar, Δp=0.5 bar - air). Working pressure: 50 bar (for steam 10 bar). sealing: NBR or Viton. Operating temperature: od -20°C up to +100°C (NBR), od -15°C up to +200°C (Viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling CEJN series 324 (DN 6.2) with thread internal BSP o versatile use in industry, mainly for liquids. thanks to small sizes used m.in. for liquids cooling molds in processing plastics. standard supplied with a cap. Working pressure: 35 bar (factor safety 8.75:1). flow capacity: 42 l/min. Material: brass nickel-plated. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 30 with thread internal BSP without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 40 with thread internal BSP without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 6 with thread internal BSP without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 80 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 30 o length 100 mm with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 40 o length 100 mm with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 6 o length 50 mm with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 80 with fitting for hose without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.



















































