- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunction Gun AKBO, equipped in special quick coupling on outlet, with cover in the molds bail of steel stainless. using this gun can: apply foam on cleaned surfaces, rinse water adjustable a stream with gun, spray e.g. agent disinfecting (at use appropriate fittings). Note: quick coupling gun and nozzles not are interchangeable with other systems!. Material: brass. trigger of steel stainless. A guard with blue rubber EPDM. sealing: EPDM. Connection (inlet): 1/2" BSP female. maximum Working pressure: 24 bar. Maximum Operating temperature: +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultiple Swivel coupling on inlet thread internal BSP, at the outlet threads internal BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHanger for fittings STORZ for mounting on smooth surface. convenient accessory intended for easy storage fittings, through putting on on hanger coupling o given size DN, a then turning in order to securing against loss. intended for such sizes as DN52, DN75, and DN110. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece insert clamp DIN 3015 type 201 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: rubber. Operating temperature: od -40°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece insert clamp DIN 3015 type 301 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: rubber. Operating temperature: od -40°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert fittings for equipment washing high-pressure, for a nut M22x1.5. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert reinforcing for pipes thin-walled DIN 2353. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWater separator for tee for pipes o diameter 28 mm for system SPEEDFIT. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndicator pressure LAM L in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line) serves for signalling (signal color green or orange) aeration the system; when configuration is vented to a sight glass signalling is "empty". Working pressure: 2 ÷ 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket model BC for mini actuator ISO 6432. W set with 1 pin and 2 rings securing. size actuator: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket model BC for actuator cylindrical series RNDC. supplied together with with 2 screws. size actuator: Ø32, Ø40, Ø50. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket fixing for a wall (steam), intended for system BIT 1/8" and 1/4".
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA connector electrical 15 mm. color: black or transparent.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug 90° quick coupling for hose with a nut and valve intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. An audible click signals a successful connection. length L - length total. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug 90° quick coupling without valve with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug 90° quick coupling with valve for hose intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. An audible click signals a successful connection. length L - length total. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug 90° quick coupling with a nut on hose, intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug 90° quick coupling with a nut on hose, intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug DN 6 quick coupling with fitting for hose, without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 6 mm. Working pressure: 25 bar. Material: brass (body plug).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug DN 6 quick coupling with tube, without thread, under cutting ring. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 6 mm. Working pressure: 25 bar. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug bulkhead quick coupling with fitting for hose, without valve intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. The design ich allows on easy operation one hand, a characteristic click allows have certainty effective connections. available are also versions with valve and in color black. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: acetal. sealing: O-ring NBR. Working pressure: for 6.9 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug bulkhead quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug bulkhead quick coupling with valve for hose intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. An audible click signals a successful connection. length L - length total. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling of a free bore and socket with valve Eurostandard DN5 (MINI), series 21KA with thread external lBSP. Widely used in industry, where required are small dimensions at high flow capacity flow and small a drop pressure. operation one hand. flow capacity: 560 l/min (Pe = 6 bar, Δp=0.5 bar - air), 8 l/min (Δp=1 bar Kv=0.48 - water). Working pressure: 35 bar. Material: steel AISI 316Ti (part threaded socket, body coupling, sleeve, valve, spring and ring), steel AISI 420 (balls). sealing: Viton. Operating temperature: od -15°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug NiTO quick coupling high-pressure for water with thread internal metric and a sleeve sealing (NT-65632B9 - without sleeve sealing). Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug NiTO quick coupling high-pressure for water with thread external metric. Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki ROTARY PLUG with thread external. quick coupling single shut-off intended for connecting equipment and tools pneumatic. has swivel part connecting plug with thread enabling rotation o 360°. connection under angle 45° with a tool allows on elimination resistance transferred through connection hose. plugs can be connected with sockets Nitto Kohki series HI CUPLA. Operating temperature: od -20°C up to +80°C. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki TWIST PLUG with thread external. quick coupling single shut-off intended for connecting equipment and tools pneumatic. has flexible connection between a plug quick coupling, a thread enabling free adjustment angle (for max. 70°), co allows convenient operation even in limited space or nad head. plugs can be connected with sockets Nitto Kohki series HI CUPLA. Operating temperature: od -20°C up to +60°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature plug quick coupling measurement DN1.2, with a cap plastic or metal and thread external, production Swedish intended for measuring pressure static, dynamic and vacuum in systems hydraulic. plug equipped in valve ensuring Leak-free connection, disconnection and tightness, even at vacuum 90%. plugs measurement made with hardened steel, durable and maintenance-free. connections with thread external sealed using an O-ring recessed in surface front (type A) or an O-ring at surface face (type B). Material: steel galvanized. sealing: NBR. Working pressure: 600 bar (for plugs TA-M-120: 400 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug measuring equipped in a cap PVC, intended for connecting with socket TEMA 100, additional connected with line thermoplastic. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug articulated with thread external or internal BSP o profile compliant with with popular the standard EURO DN7.2. possibility turn o 360° effectively prevents twisting connected hose and allows on free operation with connection for it a tool pneumatic. additional possibility positioning plug (maximum deflection o angle 30°) allows also on assembly in places hard-to-reach, without risk kinking line. German quality and made of nickel-plated steel ensures longer service life od standard plugs brass. coupling te are appropriate for use with tools impact (keys pneumatic, nailers pneumatic itp). interchangeable of all acc. to Eurostandard DN7.2 ÷ 7.8 other manufacturers. Application: pneumatics (air, nitrogen, other non-flammable gases). Working pressure: 10 bar - max. 25 bar (factor safety: 1.5). Flow rate: 1090 l/min, Pe = 6 bar, Δp = 1 bar. Operating temperature: od -20°C up to +80°C. Material: steel nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° DYROS series 30 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° DYROS series 40 with thread external BSP without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° DYROS series 80 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° DYROS series 90 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° EATON series J70000 with fitting for hose without valve. intended for cooling and temperature control moulds injection, for water and oil. Material: brass nickel-plated. sealing: Viton. Working pressure: 15 bar. Operating temperature: -15°C up to +200°C (in case use rings identifying socket temperature use up to +110°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS 90° series 30 with fitting under ring cutting without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS 90° series 40 with fitting under ring cutting without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° DYROS series 6 with fitting under cutting ring without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS 90° series 90 with fitting under cutting ring without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.



















































