- Home
- Industrial fittings
- Loading and unloading couplings
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread internal metric and a plug type CAMLOCK A, with gasket, for use e.g. in tankers railway. Material: aluminum. sealing: NBR. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut railway HEAVY DUTY with gasket, with thread metric, under wrench hook. Material: aluminum. sealing: NBR. Working pressure: 6 bar. Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for a nut railway compatible only with nut ends type KGW. Material: NBR. Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for a nut railway compatible only with nut ends type KGW. Material: EPDM. Operating temperature: od -30°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling dry-break DRY-MATE with thread internal of steel stainless AISI 316. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not It is intended for media gas. installed od side hose (part hose). The design socket based is on a valve ball, which ensures completely unobstructed Flow rate. socket supplied in set with caps with polypropylene. Coupling material: body - steel AISI 316, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE, coupling - Viton (available EPDM and kalrez). Working pressure: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling dry-break DDC with thread internal BSP with aluminum Widely used in transport road, railway, marine, aviation and in industry petrochemical, chemical and pharmaceutical. installed po side tanker. The design plug based is on a valve piston (opens during connecting and closes at disconnection coupling, co eliminates leakage liquids). meets all requirements regarding safety, protection environment natural and reliability at transferring hazardous, toxic or costly liquids. made acc. to standard NATO STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). coupling meet requirements ATEX, TDT, ADR, RID, IMDG, the directive pressure 97/23/WE. has also recommendation council european industry chemical CEFIC. sealing: O-ring (Viton), gasket flat (PTFE). Working pressure: 10 bar. Operating temperature: od -25°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling dry-break DRY-MATE with thread internal of steel stainless AISI 316. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not is intended for media gas. Installed on the pressure side (tank side). The design plug based is on a valve ball, which ensures completely unobstructed Flow rate. plug supplied in set with caps with polypropylene. Coupling material: body - steel AISI 316, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
Select options This product has multiple variants. The options may be chosen on the product page / DetailsOne-piece coupling gravity OLS, angle 22.5°, CAMLOCK A. Intended for unloading gravity tankers (pressure use not should exceed 1 bar). Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). sealing: NBR. Working pressure: 6 bar. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling recovery vapours DVR with a probe without valve (CAMLOCK D with a female BSP thread). Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. sealing: NBR. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread internal metric and a plug type CAMLOCK A, with gasket, for use e.g. in tankers railway. Material: brass. sealing: NBR. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling dry-break DDC with thread internal BSP of steel stainless widely used in transport road, railway, marine, aviation and in industry petrochemical, chemical and pharmaceutical. installed od side hose (part hose). head socket is rotational (360°). meets all requirements regarding safety, protection environment natural and reliability at transferring hazardous, toxic or costly liquids. made acc. to standard NATO STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). coupling meet requirements ATEX, TDT, ADR, RID, IMDG, the directive pressure 97/23/WE. has also recommendation council european industry chemical CEFIC. sealing: O-ring (Viton), gasket flat (PTFE). Working pressure: 25 bar. Operating temperature: od -25°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket (part hose) coupling dry-break DRY-LINK. coupling have unique construction ensuring safe and completely Leak-free connection installation (amount medium remaining on surface valve po disconnection is immeasurable). coupling DRY LINK is characterized: small weight, small dimensions and compact design - co allows easy operating in tight spaces; swivel Connection socket coupling (parts hose) – facilitates setting socket for connections with a plug and secures against twisting hose; ease operation through trained the operator, difficulty disconnection through accidental persons; large, unobstructed Flow rate through coupling at small a drop pressure – thanks to thin disks valves set parallel for flow; ease cleaning, smooth bore internal (polished in version SANITARY), small amount parts internal, no dead space – coupling DRY LINK are ideal for liquids o high viscosity and applications demanding high level purity (substances food, pharmaceutical, cosmetic, paints, adhesives); coupling DRY LINK can be also used for powders and in industry petrochemical. Material: steel AISI 316. sealing: PTFE, Viton, EPDM or chemraz®. Connections: BSP female or NPT. Working pressure: 14.3 bar for couplings DN25 and DN40, 10.3 bar for couplings DN50, 8.3 bar for couplings DN80. Vacuum: for 0.94 bar. Operating temperature: od -29°C up to +110°C (Viton, EPDM, chemraz®); od -7°C up to +110°C (PTFE).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling dry-break DRY-MATE with thread internal with polypropylene. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not It is intended for media gas and liquids o low the point ignition. installed od side hose (part hose). The design socket based is on a valve ball, which ensures completely unobstructed Flow rate. socket supplied in set with caps with polypropylene. Material: body - polypropylene glass-fiber-reinforced, ball - PTFE, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE, coupling - Viton (available EPDM and kalrez). Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at pressure working 5 bar). Maximum leakage: 2 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for a nut railway under a clamp RS, without the gasket. Material: aluminum. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut railway HEAVY DUTY with gasket, with thread metric, under wrench hook. Material: brass. sealing: NBR. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut railway with gasket, with thread metric, under wrench hook. Material: brass. sealing: NBR. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for a nut railway compatible only with nut ends type KGW. Material: PTFE. Operating temperature: od -70°C up to +220°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug (part tank) coupling dry-break DRY-LINK. coupling have unique construction ensuring safe and completely Leak-free connection installation (amount medium remaining on surface valve po disconnection is immeasurable). coupling DRY LINK is characterized: small weight, small dimensions and compact design - co allows easy operating in tight spaces; ease operation through trained the operator, difficulty disconnection through accidental persons; large, unobstructed Flow rate through coupling at small a drop pressure – thanks to thin disks valves set parallel for flow; ease cleaning, smooth bore internal, small amount parts internal, no dead space – coupling DRY LINK are ideal for liquids o high viscosity and applications demanding high level purity (substances food, pharmaceutical, cosmetic, paints, adhesives); coupling DRY LINK can be also used for powders and in industry petrochemical. Material: steel AISI 316. sealing: PTFE, Viton, EPDM or chemraz®. Connections: BSP female or NPT. Working pressure: 14.3 bar for couplings DN25 and DN40, 10.3 bar for couplings DN50, 8.3 bar for couplings DN80. Vacuum: for 0.94 bar. Operating temperature: od -29°C up to +110°C (Viton, EPDM, chemraz®); od -7°C up to +110°C (PTFE).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling dry-break DRY-MATE with thread internal with polypropylene. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not is intended for media gas and liquids o low the point ignition. Installed on the pressure side (tank side). The design plug based is on a valve ball, which ensures completely unobstructed Flow rate. plug supplied in set with caps with polypropylene. Material: body - polypropylene glass-fiber-reinforced, ball - PTFE, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at pressure working 5 bar). Maximum leakage: 2 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReloading coupling railway with thread internal 5.1/2" DIN 11 - A nut, with smooth "tail" for hose for mounting for hose clamp shell (or a clamping ferrule). Material: aluminum (refers to fittings). Working pressure: 16 bar. Operating temperature: od -20°C up to +65°C (or wider range depending od material, seal and use).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling recovery vapours CVR with a probe without valve (CAMLOCK C with fitting for hose). Available version with valve. Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). sealing: NBR. Working pressure: 6 bar. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling recovery vapours DARVR with a probe without valve (CAMLOCK D / CAMLOCK A). Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. sealing: NBR. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling recovery vapours ZPO with valve (CAMLOCK A with a female BSP thread). Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. sealing: NBR. Working pressure: 6 bar.


































