- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with thread internal BSPT o excellent durability and resistance to vibration. intended for connecting tools pneumatic with installations air. Material: steel AISI 304. Working pressure: 15 bar. Operating temperature: od -20°C up to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring for flanges SAE. Material: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, O-ring sealing on a 60° cone (DKOR), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP threadT, sealing on the thread using tape PTFE or sealant in flows; possible sealing on a 60° cone (AGR-K). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with a shut-off valve Nitto Kohki series SP CUPLA type A with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2", 3/4", 1"), 20 bar (1.1/4", 1.1/2"), 15 bar (2"). Operating temperature: od -20°C up to +80°C (NBR), od -20°C up to +180°C (Viton), od -40°C up to +150°C (EPDM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring for flanges SAE. Material: Viton (FPM80).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 3000 (SFL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing flat (ORFS). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BPMT1 for hoses thermoplastic type MT1 and MTH1. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external tapered NPT, sealing on the thread (AGN), possible sealing on a 60° cone. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with fitting for hose o excellent durability and resistance to vibration. intended for installation water. Material: steel AISI 304. Working pressure: 15 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP threadT, sealing on the thread using tape PTFE or sealant in flows; possible sealing on a 60° cone (AGR-K). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling full-bore Nitto Kohki series TSP CUPLA with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. especially recommended for liquids o high viscosity e.g. greases. Material: steel AISI 304. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 SUPERCAT (SFS). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule ZF2 for hoses hydraulic rubber type 2ST (R2A) or 4SP. assembly - skiving external. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat for flanges SUPERCAT. Material: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket x-ring for flanges SAE. Material: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with thread internal BSPT o excellent durability and resistance to vibration. intended for connecting tools pneumatic with installations air. Material: steel carbon. Working pressure: 15 bar. Operating temperature: od -20°C up to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with thread external BSPT o excellent durability and resistance to vibration. intended for connecting tools pneumatic with installations air. Material: steel carbon. Working pressure: 15 bar. Operating temperature: od -20°C up to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP thread, sealing flat - requires use additional the gasket flat (AGR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP threadT, sealing on the thread using tape PTFE or sealant in flows; possible sealing on a 60° cone (AGR-K). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with thread external BSPT o excellent durability and resistance to vibration. intended for installation water. Material: steel AISI 304. Working pressure: 15 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), BANJO under bolt with a thread metric (RNM). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with thread internal BSPT o excellent durability and resistance to vibration. intended for installation water. Material: steel AISI 304. Working pressure: 15 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing flat (ORFS), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 SUPERCAT (SFS). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external tapered NPT, sealing on the thread (AGN), possible sealing on a 60° cone. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKS), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal on cone 60°, (DKM), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), BANJO under bolt with a thread BSP (RNR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a shut-off valve Nitto Kohki series SP CUPLA type A with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Material: steel chrome-plated. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring for general use. Material: NBR90.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt double without washer for fittings BANJO type - Z, inch. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange solid SAE 3000 with four holes under bolt hex socket DIN 912; version light. Material: steel AISI 316L.



















































