- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 45°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket without valve quick coupling CEJN series 525 (NORDIC RANGE) with thread internal BSP. socket has additional O-ring, thanks to which is suitable for installation gas. has also ring securing against accidental disconnection. It is intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel coated zinc-nickel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: Viton or NBR. Operating temperature: od -30°C up to +100°C (for NBR), od -15°C up to +200°C (for Viton). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 3000 (SFL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling CEJN series 525 (NORDIC RANGE) without valve with thread internal BSP. intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel coated zinc-nickel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: Viton or NBR. Operating temperature: od -30°C up to +100°C (for NBR), od -15°C up to +200°C (for Viton). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt without washer for fittings BANJO type - Z, inch. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling HANSEN type HK with thread internal NPT and BSP. can use interchangeable with quick coupling ISO-B other manufacturers, made to the ISO 7241-1 B standard. designed and made in accordance with the directive PED 2014/68/UE. use in hydraulics power for oil hydraulic, in industry for water, steam, fuels, oils, gases and chemicals. Material: steel AISI 303, AISI 316. sealing: NBR (temperature use od -40°C up to +121°C), EPDM (temperature use od -54°C up to +149°C), Viton (temperature use od -29°C up to +204°C). Working pressure: up to 344 bar (depending on size quick coupling). Flow rate has been stated at Δp = 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing butt (DKL-FL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling SNAP-TITE with thread internal BSP and NPSF production American, without valve. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Working pressure: up to 690 bar (depending on size quick coupling), Safety factor 2:1. Material: steel AISI 316. Operating temperature: od -56°C up to +240°C - depending on kinds seal socket. Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 3000 (SFL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap HOLMBURY (NORDIC INTERCHANGE) protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 (SFL), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap screw-together, type HS, protecting against contamination and damage. Material: polypropylene. color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and thread external metric (DIN 2353). Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR. Operating temperature: od -20°C up to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with tube metric, sealing a ring cutting (BEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and thread internal BSP. version "push-pull" - Automatic disconnection at accidental tensioning line. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR. Operating temperature: od -25°C up to +100°C. Working pressure: 250 bar. Safety factor 4:1. Flow rate has been stated at Δp = 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, O-ring sealing on a 60° cone (DKOR), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard „tail” hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BP7 for hoses thermoplastic compliant with the standard SAE100R7. ferrule o diameter 5/32" Intended is for hoses type OL7, VE7 and AT7. assembly - without skiving. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap protecting socket quick coupling DIN, prevents penetration for coupling and the system, contamination which result can damage element the system hydraulic. Material: PVC. color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGROMELLE quick-coupling sockete type ISO 6150B DN 8 with thread internal BSP o compact construction and very small weight, for air. Working pressure: 16 bar. Operating temperature: od -20°C up to +100°C. flow capacity: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: duralumin (body socket), brass nickel-plated (Connection), hardened steel (button), steel galvanized (valve). sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together, type HS, protecting against contamination and damage. Material: polypropylene. color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap HANSEN standard ISO-B, protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling plug with a shut-off valve, thread internal BSP and eliminator pressure. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing plug: NBR. Operating temperature: od -25°C up to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate has been stated at Δp = 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z – of standard „tail” hydraulic for hose), with a male UNF thread, sealing butt with an O-ring (ORFS). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 90° type COMPACT. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling full-bore Nitto Kohki series TSP CUPLA with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. especially recommended for liquids o high viscosity e.g. greases. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2", 3/4", 1"), 20 bar (1.1/4", 1.1/2"), 15 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external metric, sealing on a 60° cone (CEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule Z2TX (PH) for hoses hydraulic rubber type 1SN, 2SN or 2SC. assembly - without skiving. use for ends hydraulic (PH). Diameter D1 - Diameter outer. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing on cone inverted 60° - type TOYOTA. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule MC-BP7 for hoses thermoplastic type R7 (SAE100R7). assembly - without skiving. Material: steel AISI 304.



















































