- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight ORFS with thread external BSP (gasket elastomer o cross-section rectangular), type GE-BE. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting tubular straight with fitting for hose type AI 13540 Intended for connecting pipes copper with a hose. range diameters external joined pipes od 6 for 14 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTubes seamless for applications pressure made in accordance with the standard EN 10216-1 for pipes made of carbon steel. With an EN 10204 3.1 material certificate. used commonly in industry in construction installation and pipelines. Material: steel AISI 321 (1.4541), AISI 316Ti (1.4571). length standard tubes (one section): 6 m. shipping in sections: 1 m or 2 m, longer sections po agreement costs transport.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose medium wall thickness, intended for discharge chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. wall medium wall thickness and dense spiral reinforcing ensures higher parameters pressure in ratio for hoses ECO 0.4, 0.6 and 0.7. very smooth inside, little compressible and flexible - also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 1.0 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt for BANJO type DHS with thread metric, with two holes. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "L" 2x female threadint internal BSP, 1xgwint external BSPT type A13, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun NiTO ERGO COMBI for water with quick coupling NiTO 1/2" (for lance on outlet). housing with high-strength plastic, quick coupling with brass chrome-plated. has smooth adjustment flow and lock trigger. maximum Working pressure: 12 bar. Maximum Operating temperature: +80°C. Flow rate: 50 l/min (5 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light hose multilayer o layer internal with resistant to abrasion and oil polyurethane, layer intermediate and outer with blend thermoplastic and PVC. very flexible, o small radius bending, not kinking. resistant to ozone, fats, oils and light chemicals. intended for compressed air and liquids. Widely used in industry for tools pneumatic, for air for guns for spray and painting paints based on water, sandblasting, etc. is suitable for mounting on drums. The inner layer has approval for food contact - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Inner layer: transparent polyurethane. Intermediate layer: PVC/PU (color black). Reinforcement: a polyester braid. Outer layer: TPE / PVC (color turquoise). Working pressure at a temperature of 20°C: 20 bar. Operating temperature: od -15°C up to +60°C. As the working temperature rises, the hose's working pressure value decreases.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket metal-rubber DOWTY, inch, for connections high-pressure. Material: washer - steel AISI 316L, sealing - Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose of reinforcement spiral steel, intended for hot water mixed with fluids anti-freeze. used for systems cooling and heating, for pumps in engines and machines. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. blend rubber compliant with the standard DIN 73411:79. Inner layer: black EPDM rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 4 bar. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 300.000 pulse cycles. standards: EN 857 1SC, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 90 bar to 225 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrystalline transparent, flexible and completely biocompatible hose medical free of phthalates (DEHP). intended for use in equipment for performing dialysis, for transfusion and draining blood, infusion, chemotherapy, inhalation, procedures minimally invasive, catheters, laboratories medical. can be used for pumps peristaltic, ale service life not is large. high transparency hose and not wettability surface internal ensures good visualization flow and easy total emptying hose. can be joined clamps mechanical, welded thermally, ultrasound or glued. compliant with requirements ISO 10993, European Pharmacopoeia 3.1.1.2, USP CLASS VI and REACH. is completely not cytotoxic, not hemolytic and not pyrogenic. sterilization steam in autoclaves, oxide ethylene or radiation (for 2.5 Mrad). length full roll hose 15 m. available are hoses medical o other hardness e.g. TYGON® ND100-80 (hardness 80° Shore (A)). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special, without DEHP). Maximum Operating temperature: +74°C. temperature brittleness: -42°C. Hardness: 65° Shore (A). Density: 1.19 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose pneumatic with polyethylene and aluminum for use in pneumatic systems control. very good resistance chemical layer outer allows on operation in environment aggressive chemical. Reinforcement in the molds aluminum coating increases strength hose co allows on assembly long sections without additional brackets. additional its advantage is possession tak called memory shape, enabling assembly in hard reachable places. can work buried without needs use additional covers. thanks to unique construction, hose is about 5 times lighter od standard hoses pneumatic. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, neutral biologically hose made in accordance with technology improvement peroxide hydrogen. retains properties chemical, electrical and mechanical in temperature up to +200°C. sterilization steam, oxide ethylene, radiation. meets standards FDA, BfR, USP (kl.VI), standards quality ISO 10993 (toxicity, irritation, cytotoxicity, hemolysis). Material: semi-transparent silicone. Hardness: 62° ±5° Shore (A). Density: 1.15 ±0.03 g/cm 3. Operating temperature: od -50°C up to +200°C (momentarily +230°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying anhydrous ammonia in the molds liquid and gas. Layer inner with thick rubber antistatic (R≤10 6 Ω/m). Reinforcement with high-strength cord ensures high Safety factor 5:1. Layer outer with rubber antistatic (R≤10 6 Ω/m) resistant to chemicals, abrasion, ozone and conditions atmospheric, micro-perforated. hose compliant with requirements standards EN ISO 5771:2008 for hoses rubber for conveying anhydrous ammonia. hose intended in particular for ammonia in processes production fertilisers nitric, agents cleaning and for syntheses many compounds chemical. can be used in other fields industry, using anhydrous ammonia, such as refrigeration industrial (agent R717 – ammonia, used is in large installations refrigerant; hoses flexible serve primarily for filling installation), metallurgy and many other. hose can be also used for ammonia dissolved in water - water ammonia, used widely in industry m.in. in treatment plants sewage (regulator pH), for regeneration resins ion-exchange, in industry gum and plastics and for treatment water boiler. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber, micro-perforated. Working pressure: 25 bar. Operating temperature: od -40°C up to +55°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak Detection Spray - Leak detector in spray. quickly and reliably allows on locating leakage and cracks in connections and installations gas and systems compressed air. Not causes corrosion, is non-flammable and friendly for leather. tested acc. to standards DIN-DVGW.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTube pliable for grease nipples with fitting threaded. Material layer internal: polyethylene.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. Dla group dimension 0 occurs one hole under bolt, for group dimension 1 ÷ 6 available two holes under screws. standard has profiled (grooved) surface hole for a pipe. Material the insert: green polypropylene. Operating temperature: od -30°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling CEJN 115 with thread external and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1000 bar (coupling connected). pressure bursting: 2600 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality plug water quick coupling NiTO 1/2" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK F with a BSPT male thread or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, strong A clamp with closure articulated for large loads o flanged edges tape, recommended for fastening thick-walled, reinforced hoses industrial and pipes. unique The design ensures even clamping on whole circuit, ensuring optimal sealing. moving A bridge allows multiple assembly without the need removing hose. made in accordance with the directive RoHs 20032/95/EC. three point welds on band, bolt with spacer o high strength together with with half-shafts securing guarantee maximum and secure clamping. A clamp has on band marking diameter minimum and maximum and Material, with which is made. A clamp in version W4 made is entirely of steel stainless and Intended for demanding applications, where essential is high resistance to corrosion - for applications marine and in industry food. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. important! exceeding value torque clamping will cause bend housing screws; not recommended mounting using tools pneumatic. tape and A bridge made are of steel AISI 304, bolt and shafts of steel AISI 302. maximum pressure working up to 45 bar dependent is od type hose and diameter crimp.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap lever coupling PERROT. Material: steel carbon, galvanized. Working pressure: up to 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap with thread internal BSP. Material: steel AISI 316. pressure working 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type FPMU used in systems hydraulic as element opening free Flow rate in one direction. Flow rate throttled in direction opposite adjustable is using swivel ring. standard pressure opening 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow: A → A1 (free), A1→ A (throttled). Material: steel galvanized (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: BSPT female.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 4171 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: steel carbon. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female. Operating temperature: od -20°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve fast trigger type VSR L in version ended on both sides couplings push-in (line - line), trigger discharged through coupling push-in. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTank filter and filter-regulator for system BIT 1/8" and 1/4". Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of air-conditioning jaws for a FINN-POWER type P16 crimping press. Material: surface-hardened steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC in white with a thread internal trapezoidal compliant with the DIN EN 12713 standard and with a male thread for hygienic couplings (Rd, IDF, RJT). The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90°, type R4, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter made of high-quality glass-fiber-reinforced polypropylene, food-safe, intended for use with the most popular and most commonly used plastic barrels used for storing raw materials (200 liters). Designed to facilitate the installation of e.g. a suction pump or a ball valve (tap). A tight connection on the DIN EN 12713 male thread is ensured by an O-ring gasket. Material: polypropylene glass-fiber-reinforced. gasket: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread external and thread internal BSP type A5/Z, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type RDST with thread external metric, reducing, sealing 60° cone. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross with thread internal NPT, type 102H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle SAFETYSTAR extended bent 30° for guns for air, terminated thread metric M12x1.25. reducing level noise for 80 dB. meets the following standards safety and the directive: OSHA 1-13.1. (European Agency safety and Health in use), 2003/10/WE, 2006/42/WE, EN 12100. Connection: M12x1.25 male. Material: steel nickel-plated (nozzle), POM (Connection). pressure maximum: 10 bar. Operating temperature: od -10°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery, intended for conveying wine, beer, juices fruit, alcohols o a concentration up to 96% and other substances food free of fats. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. thanks to external corrugation hose is exceptionally pliable and flexible. outer surface hose with material thermoplastic o properties slippery fabric has very low factor friction, co additional facilitates operating a hose and eliminates friction o other hoses and element equipment. recommended way mounting with fitting are special clamp shell EASY SHELL, o shape adapted for serrated hose. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73. Inner layer: white, smooth rubber butyl (IIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red synthetic rubber with coating thermoplastic. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. available with arms o length 200, 250 and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter elbow. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.



















































