0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting - Tee "T" with thread external BSPT type AI 13220 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting ORFS with thread internal BSP (sealing on the thread – PTFE tape or anaerobic sealant), type GAI-B. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hand Hose crimper UPJ

          All products | Hose and tube assembling machines
          0 €
          Crimper hand UPJ intended for crimping textile-reinforced hoses with type EC sheet-metal ferrules. standard equipped is in two sets (po 6 segments clamping) jaws o diameter internal crimped hoses: DN 4 ÷ 8 (range diameters internal ferrules EC: 10 ÷ 17 mm), DN 8 ÷ 10 (range diameters internal ferrules EC: 16 ÷ 22 mm). Do press exists possibility purchase base o index EC-100271.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Grease nipple 90° DIN 71412 C serving for introduction substances lubricating between cooperating surfaces in order to reduction resistances friction and processes wear. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee with a female NPT thread steel stainless, 101H

          All products | Precision threaded fasteners
          0 €
          Tee with thread internal NPT, type 101H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard SAFE SLEEVE MSHA with dense fabric Intended for protection hoses or bundles lines hydraulic and pneumatic. excellent resistance to abrasion (tested acc. to SFS-EN ISO 12947-3), resistant chemical and on radiation UV, low conductivity electrical. A guard protects people located in the vicinity bursting hose. meets standards EN ISO 3457 and EN 12999. product flame-retardant, approved for use in mines. attribute width tape specifies width cover in state flat. Material: black polyester (with printing). Operating temperature: od -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Gasket metal-rubber DOWTY, inch, for connections high-pressure. Material: washer - steel carbon, sealing - NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Gasket coupling TW DIN 28450, NBR, type GSD

          All products | Tankwagen couplings and ECTFE-lined couplings
          0 €
          A profile gasket for a TW (tankwagen) coupling, type GSD (for a 4" coupling, an O-ring gasket type TWO is used). Material: NBR (NBR, perbunan). range temperatures (approximate): od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hydraulic hose mining EN 853 2SN

          All products | Hydraulic rubber hoses
          0 €
          Hydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 853-2SN. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Working pressure: from 90 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Black, opaque and flexible hose with fluoroelastomer (Viton), resistant to fuels, solvents, oils, chemicals, in particular at elevated temperature. used for concentrated acids, bases, alcohols, solvents chlorinated and aromatic, hot fuels and oils. is suitable for pumps peristaltic. resistant to aging, ozone, light solar and conditions atmospheric. flame-retardant. opaque black wall hose secures substances sensitive on light. used in laboratories and use general-industrial. constitutes economical alternative for hose VERSILONTM F-5500-A. length full roll hose 50 m (for diameter internal od 4 mm for 12 mm - 25 m, od 15 mm - 5 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber fluoro (FKM). Operating temperature: od -20°C up to +200°C (momentarily up to +300°C). temperature brittleness: -20°C. Hardness: 60° Shore (A) - for 4x6 mm, 70° Shore (A) - for 4x8 mm. Density: 1.90 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. especially recommended for industrial or automotive installation hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose silicone reinforced polyester, ML, blue

          All products | Automotive hoses and hose connectors
          0 €
          Hose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. length standard: 1000 mm (Available also in section 2000 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 0.86 bar to 8.75 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high a concentration hydrocarbons aromatic, hot oil and solvents. Due to high general resistance chemical rubber FPM It can be used for aggressive chemicals, in many cases also in elevated temperatures. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic. Layer outer with rubber chloroprene CR resistant to conditions atmospheric, ozone, abrasion and oils. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50 º C. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 10 bar. Operating temperature: od -25°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose ventilation self-extinguishing OREGON

          All products | Ducting and ventilation hoses
          0 €
          Light, flexible and smooth with small grooves inside hose with soft polyvinyl chloride (PVC), reinforced spiral with hard PVC (right-handed). intended for extraction contaminants air, smoke, discharge dusts, chips, fibres in industry textile etc. widely used in various use industrial. self-extinguishing and flame-retardant, in accordance with American class flammability UL 94 V-2. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Wall thickness measured between the spiral. Hose material: soft grey PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -10°C up to +60°C (podworking pressure depends on temperature).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible hose suction-delivery intended for conveying water, juices, drinks and other products food in temperature up to +40°C. no phthalates in material hose recommends go for conveying milk and its dairy products and alcohols o a concentration up to 50% and temperature up to +40°C. not recommended for oils and greasy substances food. Reinforcement spiral with wire steel, embedded in wall with soft PVC, ensures good resistance to vacuum and kinking hose. smooth wall inner reduces losses flow and ensures ease cleaning. transparent wall resistant to radiation UV allows on easy visual control of the flow. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced only spiral steel (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 12 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -15°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Indicator pressure LAM L (line – line)

          All products | Functional fittings
          0 €
          Indicator pressure LAM L in version ended on both sides couplings push-in (line - line) serves for signalling (signal color green or orange) aeration the system; when configuration is vented to a sight glass signalling is "empty". Working pressure: 2 ÷ 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate plug 90° quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DN11.8 with a weld-in connection used for low and high pressure. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Push-in coupling elbow SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Push-in coupling elbow for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A sight glass control lubricator

          Accessories for FRL | All products
          0 €
          A guard lubricator CVL intended for system SKILLAR series 100-200-300-400 and series BIT.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ball valve 1/2" of steel stainless with mechanical cover lever bails, with socket quick coupling DN 11.8 in cover with rubber EPDM. Application: for water, agents cleaning, foam. socket quick coupling allows connection many types lances and nozzles. Connections: socket quick coupling DN11.8 in cover with EPDM / BSP female. Material: steel AISI 316. A guard: EPDM rubber. Working pressure: up to 60 bar. Operating temperature: up to +95°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: NPT female.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal two-piece ball valve with full bore type 2006SC, intended for installation industrial. lock lever occurs not we all sizes. It can be used for air, gases, water, steam water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. Material body: cast steel stainless CF8M. Material the ball: cast steel stainless CF8M. Material lever: steel AISI 304. sealing the ball: PTFE / RTFE. sealing stem: PTFE. Connection: BSP female. Operating temperature: od -20°C up to +200°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° adjustable with thread external, type R34, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter BSP male / socket WEO, hardened steel, series 810

          All products | Fittings for high-pressure hoses
          0 €
          Adapter with a male BSP thread and socket WEO for use in systems hydraulic; serves for easy connections line hydraulic terminated a plug WEO. Po connection plug has freedom of movement movement in the socket, co prevents twisting lines in during mounting. Working pressure: 350 bar (for size for 3/4"), 250 bar (for size 1"). Material: hardened steel. Operating temperature: od -30°C up to +100°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter one-piece for high-pressure equipment washing, brass

          All products | Fittings for hoses for pressure washers
          0 €
          Adapter one-piece for high-pressure equipment washing with connection metric M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle with reducer pressure; for direct installation on tube; reduces maximum pressure below 2 bar. Compliant with the OSHA 1-13.1 standard. (European Agency safety and Health in use). Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Exceptionally pliable and flexible hose suction-delivery intended for conveying substances food, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. commonly used in road tankers for handling milk. Due to high flexibility It can be used for hose reels drum. Layer outer hose resistant to abrasion and conditions atmospheric. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: -25°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting 45° INTERLOCK with a female metric thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Screw A fitting threaded type S4 with thread external BSP (sealing flat), made in accordance with the standard EN 14424, Intended for hoses rubber and some types hoses with plastics thermoplastic, with soft reinforcement textile (without spiral with wire). used commonly in sector fuel in lines distribution fuels and gases (e.g. LPG). basic version made completely with brass; Available also in version with brass chrome-plated (A fitting and ferrule) and in version of steel stainless (A fitting) with ferrule with brass chrome-plated. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: od -20°C up to +65°C (od -30°C up to +70°C - for LPG).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Connector for hoses, brass, type EW

          All products | Low-pressure fittings and adapters
          0 €
          Straight connector for hoses. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connector hose RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. Available in the molds simple a connector o length 1000 mm. Working pressure: from 0.6 bar to 3.7 bar, depending on the diameter a connector. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Chain KN for coupling TW DIN 28450, steel stainless

          All products | Tankwagen couplings and ECTFE-lined couplings
          0 €
          Chain KN for fittings TW (tankwagen). Material: steel AISI 305.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          The non-freezing high-pressure SG35 water gun for industrial applications. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet terminated thread internal 1/4" BSP. Gun Available is also with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Shears for cutting pipes and hoses o diameter 4 ÷ 32 mm. W sale available are blade spare under index JG-TS32EK.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nipple reducing with thread external BSPT, cast iron, type 245/40

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Nipple reducing with thread external BSPT for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible A guard made with tape cut with tubes PE. Intended is for protection cables electric and hoses and connecting ich in beam. resistant to acids, oils, solvents and radiation UV. Material: black polyethylene (PE). Operating temperature: od -30°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A guard socket quick coupling AKBO, EPDM

          All products | Quick couplings for water
          0 €
          A guard socket quick coupling AKBO DN 11.8 protecting against accidental damage. Available in colors: yellow, blue or black. Material: EPDM.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A guard top for gun NiTO HEAVY DUTY, blue

          All products | Low-pressure water spray guns
          0 €
          A guard top for gun NiTO HEAVY DUTY. Material: perbunan (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A switch bistable 2-position VRM-300 N

          All products | Equipment for pneumatic valves
          0 €
          A switch bistable 2-position VRM-300 N with short a lever for valve VME. Do mounting required is Adapter VME1-000. color: black.
        Go to Top