- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting - insert acc. to EN14420-4 with smooth "tail" for mounting clamp shell RS. or for crimping ferrule TI-LR, TI-LDR. for use in industry, e.g. for connections with hoses flexible. Material: steel carbon, galvanized. Working pressure: up to 25 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal, with a nut brass, for washers high-pressure. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting angled 90° INTERLOCK with a female BSP thread, 60° cone with an O-ring, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew A fitting threaded type S1 with thread internal BSP (with gasket flat), made in accordance with the standard EN 14424, Intended for hoses rubber and some types hoses with plastics thermoplastic, with soft reinforcement textile (without spiral with wire). used commonly in sector fuel in lines distribution fuels and gases (e.g. LPG). basic version made completely with brass; Available also in version with brass chrome-plated (A nut and ferrule) and in version of steel stainless (A fitting) with ferrule with brass chrome-plated. Material: brass (B), gasket with polyurethane (PU). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: od -20°C up to +65°C (od -30°C up to +70°C - for LPG).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector (A cross) type AI 13510 intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 14 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector "T" for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance bent type ST-85 intended for a high-pressure washer. Smooth regulation angle bend lance od 20° for 140° allows washing surface hard reachable e.g. chassis and roofs vehicles, tanks etc. Connections: (inlet) 1/4" BSP female / (outlet) 1/4" NPT female. Working pressure: up to 210 bar. Operating temperature: up to +150°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, flat (at rest), delivery hose intended for conveying water. economical solution for average conditions use. used in agriculture, construction and in other fields industry. Available in two versions: HIFLAT LD (green) and HIFLAT HD (blue). Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: green PVC (LD), blue PVC (HD). Working pressure: from 2.5 bar to 10 bar - depending on the diameter hose and temperatures and type hose (LD, HD). Operating temperature: od -20°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized hose suction-delivery for water and sewage in installations sanitary on ships, boats motor, yachts, etc. hose odorless and impermeable odors of drainage sewage on outside (5-year warranty). Layer outer resistant to factors marine and conditions atmospheric. has resistance to vacuum. compliant with the standard EN ISO 8099. On special order Available version SANITARY STAR / 7 o pressure working 7 bar. length standard: 60 m or 120 m. Inner layer: white synthetic rubber. Reinforcement: braid synthetic, steel spiral. Outer layer: white synthetic rubber. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. pliable and flexible, also in low temperatures. compressible, smoother inside in comparison hose ECO 0.4. O sound resistance to abrasion, resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.6 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature valve reducing angled type RMC (Connection threaded with an O-ring on inlet and coupling push-in at the outlet) thanks to its geometry, ensures parallelism line relative to remaining element installation. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple double with thread external BSPT for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial oil for lubrication and maintenance equipment pneumatic in accordance with the standard DIN 51 524 – 2 with class viscosity VG 32 (in accordance with the standard ISO 3448). oil ten contains substances surface active, which ensure protection against corrosion in wide the scope temperatures od -20°C up to +80°C. packaging: 1 l, 5 l.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge right-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp right-handed OMP Intended is for mounting typical spiral hoses ducting of spiral with wire coiled in right e.g. P1PU, P2PU, P3PU, P7PU, SMARTFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing sealing MKV with thread internal BSP for fittings transfer TW. Do use with a ring closing MKH. Together they molds an MK coupling. made in accordance with the standard EN ISO 14420-6 (formerly DIN 28450). intended for liquids, bulk materials and gases (with the exception liquefied gas and steam). Material: brass. pressure: od -0.8 bar up to 16 bar. Operating temperature: od -20°C up to +65°C (should take into account medium and Material seal). sealing coupling (type the gasket GSD, for 4" type TWO): NBR. sealing thread (type the gasket GD): polyurethane.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension – ready line for air made with hose WTZ o diameter 10 mm and o length 10 or 15 m. terminated brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) standard quick coupling pneumatic Eurostandard DN 7.2. the simplest solution for connection tools pneumatic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: od -5°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer symmetrical (reducer concentric) for welding butt for applications pressure made with pipes seamless, compliant with the standard EN 10253-4 (steel stainless). With an EN 10204 3.1 material certificate. used commonly in industry in construction installation and pipelines, as element complete welded ends for hoses metal and rubber (welded with fitting threaded and flanged) and other fittings and element fittings. on request available also other sizes and materials, in this reducers o more than two sizes DN and reducers ASME. Dla fittings type A (EN 10253‑4A) strength on pressure can be slightly smaller than for tubes straight o tej same diameter D and wall thickness T. pressure working reducer can determine using coefficient correction pressure the given in standards EN 10253 (for given sizes approximately 1.0 ÷ 0.9 pressure corresponding dimensionally tubes). On special order available are other types fittings for welding-on butt: elbow 45° and 180°, reducers eccentric, tees, caps. Material: steel stainless AISI 321, AISI 316Ti. Working pressure: od 61 up to 185 bar - depending on the diameter.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple hand lever 75/PK silver 500 g without tooling. Material body: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer with throttling MWSVL with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee reducing "T" with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee reducing for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum ferrule for fastening covers SAFE SLEEVE. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BPMTKM for hoses thermoplastic type MTKM or CNG. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat for fittings NITO with thread internal type A.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket metal-rubber DOWTY, metric for connections high-pressure. Material: washer - steel carbon, sealing - NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 2SN, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 415 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible double hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on the diameter hose). Operating temperature: od -40°C up to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose silicone Widely used in industry (e.g. in systems cooling and for hot air). exceptionally resistant to vapours oil mineral. hardness 65° Shore (A). Inner layer: blue silicone. Reinforcement: plies textile. Outer layer: blue silicone. Operating temperature: od -60°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high a concentration hydrocarbons aromatic, hot oil and solvents. Due to high general resistance chemical rubber FKM It can be used for aggressive chemicals, in many cases also in elevated temperatures. used for handling chemicals with tankers road and railway. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic and spiral steel. Layer outer with rubber chloroprene CR, antistatic, resistant to conditions atmospheric, ozone, abrasion and oils. built-in two copper cable for discharge charges electrostatic. compliant with EN 12115:11 (type M). Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Vacuum: 0.9 bar. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: 16 bar. Operating temperature: od -25°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN11.8 with fitting for hose, with a flange, facilitating fast connection gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality plug water quick coupling NiTO 1/2" with double fitting for hose, enabling assembly hoses o two diameters. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug quick coupling with a nut on hose, intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK E with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. both versions meet all required parameters and come from od reputable suppliers. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap CEJN series 232 with a chain protecting against contamination and damage. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type FPU used in systems hydraulic as element opening free Flow rate in one direction. Flow rate throttled in direction opposite adjustable is using a knob. standard pressure opening 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow: A → A1 (free), A1 → A (throttled). Material: steel carbon, galvanized (body), steel (spring, stem), plastic (knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve 1/2" of steel stainless for multifunction use for water, agents cleaning, foam. It can be used independently or with quick coupling enabling connection many types lances and nozzles. secured against opening valve through fall on its lever. has solid cover with rubber EPDM protecting valve and floor against damage in case fall. Connections: socket quick coupling DN11.8 in cover with rubber EPDM / BSP female with gasket flat (Viton). Material: steel AISI 304. Working pressure: up to 60 bar. Operating temperature: up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: metric LET-LOK®.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal two-piece, flange ball valve type 2019S with full bore, a lock lever and connection for the actuator acc. to ISO 5211, intended for installation industrial. It can be used for air, gases, water, steam water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Material body: cast steel stainless CF8M. Material the ball: cast steel stainless CF8M. Material lever: steel stainless AISI 304. sealing the ball: PTFE / RTFE. sealing stem: PTFE. Connection: flange PN16 acc. to DIN 2501. Operating temperature: od -20°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet assembly system BIT (2 plate + 2 screws). Material: steel galvanized.



















































