- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling for automatic reels drum SR. Material: steel AISI 303.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread internal BSP, under a clamp shell EN 14420-3 / DIN 2817 (indexes dedicated clamps: RS 636... and RS-637...) with tail serrated, type MSLR. coupling intended is for mounting between other for hoses industrial - on example in use transfer. Working pressure: 25 bar. Coupling material: brass (MS), steel stainless 316 (SS). sealing: gasket flat (in set, standard polyurethane, for steel stainless PTFE). Operating temperature: od -20°C up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in reducing, type R8, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter ORFS with thread external BSP (sealing 60° cone), type EVGE-B. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter reducing RS with thread internal and external BSP, NPT and trapezoidal, intended is for connecting lines (hoses with fitting) and element installation industrial o pressures working for several dozen bar. used for all kinds media: water, air, substances chemical, products petrochemical. Dla very aggressive substances chemical available coupling coated layer resistant chemical a lining with fluoropolymer ECTFE, and lining in version conductive CF-ECTFE (R 6 Ω). depending on size and the manufacturer, coupling have various shapes flange under wrench. Material: steel AISI 316. sealing: gasket flat (PTFE) - BSP female.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic reel drum for hoses for cold and hot water, oil, greases and other media. spring rewind tested for 25000 cycles winding and unwinding. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. W set stopper for hose. A reel not is equipped in hose, which should order separately. A bracket swivel or additional A bracket fixed for fast removal (e.g. in winter) ordered separately. advantages: Swivel coupling of steel AISI 304 (ED-540-10 Swivel coupling with brass), sealing Viton. Material drum: steel carbon painted powder. sealing: Viton. Operating temperature: up to +130°C (without hose).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA throttle trigger MWDSE with thread external used in systems compressed air in order to reducing level noise. Material: brass nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead articulated for mounting on piston rod actuator. Do use in case occurrence loads not being in axis piston rod actuator. head articulated gives greater the ability assembly. thread: M4 ÷ M36x2. Material: galvanised carbon steel (head), steel (joint).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket BCS quick coupling without valve with thread internal BSP for lances, guns and equipment washing. Material: brass nickel-plated. Working pressure: 310 bar. Operating temperature: +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BAUER lever coupling socket with "tail" for hose with wide application between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: NR/SBR. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow reducing 90° with thread internal BSP and thread external BSPT for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based o content compounds aromatic up to 50%, oily air, gaz natural (not LPG), water oily, water cooling of agents anti-corrosion. marked on bellows single yellow stripe. Inner layer: NBR rubber (NBR). Reinforcement: cord nylon. Outer layer: rubber CR (chloroprene). Flanges: galvanized carbon steel. Operating temperature: od -20°C up to +90°C (momentarily +100°C depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality set water quick coupling NiTO 1/2" - socket with thread internal + plug with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector anti-vibration silicone with one corrugation reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with rubber fluorine (fluorocarbon). pressure factor safety: 3:1. meets standard SAE J2006 R3. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Operating temperature: od -50°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT1, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge left-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp left-handed OML Intended is for mounting hoses type CLIP (hoses this type made are with impregnated fabric, a spiral coiled in left made is with sheet and wire steel) np: KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet: Gun Nito I Combi with short nozzle adjustable and socket quick coupling Nito 1/2" with fitting for hose 1/2". Working pressure: 6 bar (for 40°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AKBO HEAVY DUTY hot-water gun of AISI 316 steel, with insulation Teflon-air and with cover protecting tongue trigger. Equipped with a 40 cm long lance with a handle and a nozzle with stream adjustment. It is not intended for steam. Use for hot water requires particular caution. Body material: AISI 316 steel. Pusher material: stainless steel. Linings and seals of ethylene-propylene rubber (EPDM). Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuiet A universal Gun intended for removing with surface all contaminants: liquids, fine chips, filings etc. light The design and ergonomic shape ensure easy and convenient use. Gun equipped is in special nozzle straight o length 130 mm guaranteeing safety and low level noise. mechanism lever allows precision dosing flowing medium. Available model with regulation flow. compliant of the standard OSHA 1910.95 (b), STD 1-13.1 and the directive 2003/10/EC. Material body: acetal. Material nozzle: steel galvanized. Diameter nozzle: 8 mm. sealing: NBR. Working pressure: 16 bar. Operating temperature: od -10°C up to +60°C. Flow rate: 260 l/m (at a pressure of 8 bar). level sound: 74 dB (at a pressure of 8 bar). force air blowing: 1.72 N.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: threaded BSP. direction revolutions: right. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLevel gauge intended for observation level oil hydraulic, mounted on side wall bowl. Available in two variants make: without thermometer and with thermometer. oil penetrates for the inside level gauge through holes in screws assembly type BANJO. Material: polyamide (body), aluminum (housing), polyamide (hole inspection). sealing: NBR. Operating temperature: od -20°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° SAE 6000 o compact construction with thread internal BSP for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless tubes precision made of steel stainless AISI 316/316L, drawn on cold, annealed. intended for installation pressure liquids and gases, installation hydraulics power, installation fittings control-measurement. precision, o strict tolerances Diameter outer and Wall thickness and controlled properties mechanical and technological material (certificate 3.1 acc. to EN-10204) ensure possibility use in most critical installations. given pressure working is pressure theoretical acc. to EN 13480-3. Material: EN 1.4435, ASTM TP 316L. length standard tubes (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with threads external BSPT type A16, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice intended for marking ferrule clamping of size for 2". standard equipped in A handle single-line, which can contain for 16 characters o the height 3 mm. drive: pneumatic max. 6 bar. weight: 50 kg. accessories ordered separately.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: hypalon (SCM). range temperatures (approximate): od -20°C up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic thread sealant. Sealing of hydraulic and pneumatic systems. high viscosity, medium strength – disassembly possible. Gap maximum 0.5 mm. has certificate BAM - approval for installation with oxygen (Maximum Operating temperature: +60°C, maximum pressure working oxygen: 10 bar). color: yellow. Operating temperature: od -60°C up to +150°C. Packaging of the "tube" type with a capacity of: 50 and 200 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge hot exhaust gases engines petrol and diesel. used as hose workshop unrolled on floor adapted for drum systems winding, hose for channels suction or on stations for testing engines. resistant to creasing thanks to reinforcement white, thick, round spiral nylon (PA), cover with outside black TPE. resistant chemical, in particular on vapours gasoline and oil, a also ozone, hydrolysis, microbes and radiation UV. Not contains halogens and softeners. hose P-G-EX 1 should be used together with with vacuum system discharge exhaust gases, using appropriate connector between a hose a outlet exhaust gases with engine. Other diameters are available on special order in the scope 40 ÷ 250 mm. Assembly of the hose on connectors with bridge clamps (prawo-handed). length standard: 2.5 m, 5 m, 7.5 m, 10 m, 15 m and 20 m. Thickness measured between the spiral: 0.4 mm. Hose material: fabric polyester impregnated black coating TPE (thermoplastic elastomer). Reinforcement: spiral nylon in cover TPE protective against abrasion. Operating temperature: od -40°C up to +150°C (momentarily +170°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery, o thick wall, intended for conveying substances food demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic, steel spiral. Outer layer: blue, smooth rubber CR. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -15°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. used for installation o lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible high quality hose polyurethane manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. as hose without reinforcement is suitable for very low pressure for a few bar and as hose cover. crystalline transparent wall allows excellent observation medium. smooth surface inner facilitates Flow rate and cleaning. hose strong od similar hoses PVC, more retaining its shape, well resistant to kinking, flexible in low temperatures. made with polyurethane – polyether, resistant to hydrolysis and abrasion. Contains no cadmium, silicone, plasticisers or halogen compounds. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of FDA 21 CFR 175.105, 177.1680, 177.2600 and WRAS for water 23°C). Hose material: soft, transparent polyurethane (polyether) free of phthalates. Operating temperature: od -30°C up to +70°C (momentarily up to +100°C). temperature brittleness: -70°C. Approximate value of the recommended working pressure: from 2.5 bar to 4.8 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to vacuum hose suction-delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. length standard: 60 m or 120 m. Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: EPDM rubber / fiber glass. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C, outer up to +530°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized silicone resistant to oils and high temperatures up to +300°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHanger intended for easy storage hose 1/2" (40 meters) or 3/4" (30 meters) - REKFR60 / 1/2" (60 meters) or 3/4" (50 meters) - REKFR70. raises comfort use and increases service life hose. convenience and saving space. Material: electropolished steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFleece abrasive A-VFN for cleaning and finishing surface.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug 90° quick coupling without valve with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. lever: steel AISI 304. Sealing: EPDM.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 4334 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female/BSP male. Operating temperature: od -20°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.



















































