- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 8 channel, flat-jet, terminated thread external 1/4" BSP. Intended for blowing off with greater surface all contaminants: liquids, fine chips, filings etc. is characterized high force air blowing at low level noise. ideal for construction knives aircraft. compliant of the standard OSHA 1910.95 (b), STD 1-13.1 and the directive 2003/10/EC. Material: acetal. Working pressure: up to 10 bar. Operating temperature: od -20°C up to +60°C. Flow rate: 580 l/min (at a pressure of 8 bar). level noise: 81.5 dB (at a pressure of 8 bar). force air blowing: 5.05 N.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket water quick coupling NiTO CLICK 1/2" with thread internal. quick coupling NiTO CLICK to water quick coupling made according to profile very popular plastic quick couplings garden and compatible with them. sealing using an O-ring placed externally on plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. intended for water, water of agents cleaning for use in industry, services, horticulture, agriculture etc. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: od -30°C up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BAUER lever coupling socket with a flange PN 10 with wide application between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: NR/SBR. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal BSP consisting with spigot and ferrule, Intended for hose KUKA 250 for cleaning sewers. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBellows rubber for compensator intended for use in installations, in which medium constitutes hot and cold water, water with addition agents treating, industrial, sea, glycol, weak acids, bases, esters and ketones. Not serves for conveying media containing oil. BV certificate (Bureau Veritas). Inner layer: EPDM rubber. Reinforcement: cord nylon. Outer layer: EPDM rubber. Operating temperature: od -30°C up to +90°C (depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut with thread metric Intended for mounting clamp DIN 3015 heavy type 201 on a rail ABINP. Material: alloy zinc with aluminum or steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun Nito II Combi with connection with thread internal 3/4" BSP. used for system NitoClean. Possibility of mounting a lance or nozzle in the Nito 1/2" system. Smooth regulation stream water. A handle with a trigger. Working pressure: 25 bar. Operating temperature: up to +90°C. Flow rate: 20 - 60 l/min (5 bar) depending on used the head.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe high-pressure AURA water gun for industrial applications. part outlet terminated thread internal 1/4" BSP. Gun Available is also with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 180 bar. pressure The permissible: 210 bar. Flow rate: 25 l/min. Operating temperature: up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle Intended for washing and cleaning water, which stream adjustable is thanks to swivel the head. Flow rate can be completely closed through solid tightening the head. mechanism made of steel stainless (AISI 303), cover and the gasket with rubber EPDM. Available with handle in color blue, red and white, AK-RSHW3-W entirely in color white ( AK-RSHH4-BK and AK-RSHH4-W - version without handle, 1/2" BSP male). W case use with hot water, should maintain particularly agents caution. Not It is intended for steam! Connection: 1/2" BSP female. maximum Working pressure: 16 bar. Maximum Operating temperature: +80°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality quick coupling on hose garden 1/2" or 3/4". can je mount on two ends hose, co allows fast connection other element system irrigation in garden, on plot or against house. quick coupling equipped is in appropriate profiled teeth, which ensure solid assembly hoses. Material: PVC. Working pressure: up to 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPTFE tape FLANGIFLON Intended for sealing flat surface (e.g. connections flange). Working pressure: up to 250 bar (dependent od temperatures). Operating temperature: od -240°C up to +260°C. environment: pH 0 ÷ 14.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "Y", adjustable with thread external, type R23/M, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle serves for mounting sensor proximity on actuator cylindrical. brackets sensors DXF: o index codes W09500001... - intended for actuators with sleeve aluminum, o index codes W09500005... - intended for actuators with sleeve of steel stainless. Material: steel stainless, plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: teflon (PTFE). range temperatures (approximate): od -20°C up to +220°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternally Serrated flexible and strong hose suction - delivery for water and sewage. is characterized good resistance on impacts external and heavy conditions use and resistance on radiation UV and low temperatures. used for in systems irrigation, tankers, for rinsing sewers and emptying septic tanks. used also in installations industrial. Hose material: grey-violet PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the diameter hose and temperatures. Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, soft and flexible, easy in handling hose delivery intended for conveying substances food, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. Layer outer hose resistant to abrasion and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: od -25°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. used for installation o lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 3TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 55 bar to 145 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and pliable, resistant to temperature hose suction intended for discharge gases, vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used mainly in industry metallurgical, foundry, ceramic, glass, at furnaces, engines and as A guard thermal. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: impregnated fabric glass with fibres of steel stainless, externally grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +400°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. W industry food It can be used for conveying food hydrated, acidic, alcohols up to 20% e.g. juices, drinks, beer, wine,(simulants A, B, C; up to +60°C and 2 h). Not recommended for milk and dairy products or oils and greasy food substances. Reinforcement spiral with hard PVC, resistant on impact, ensures good strength on vacuum and kinking hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. hose FLORIDA complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral (grey). Working pressure at a temperature of 20°C: from 3 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: od -5°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEICON anti-corrosion coating zinc ZSN – spray 400 ml
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings0 €High-quality coating zinc for securing all metals against rust and corrosion, repairs defects and securing places po welding, drilling. dryness touch applied coating reaches po 15 min. resistance thermal up to +500°C. longer time securing in ratio for standard coatings (test salt-spray >550 hours in comparison with 240 hours standard type). thanks to high purity zinc (99.9%) and high content metal in dry film (70%), not requires additional layer end. Packaging - spray 400 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug double coupling CAMLOCK AA made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug BPS quick coupling without valve with thread internal BSP for lances, guns and equipment washing. Material: steel stainless. Working pressure: 400 bar. Operating temperature: +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with thread external NPT and valve intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. An audible click signals a successful connection. length L - length total. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall drums ECODORA series E-530. Material: steel painted powder.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 4190 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSP female. Operating temperature: od -20°C up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve switching 3-way, normally closed, used in systems hydraulic for control direction flow liquids working. Control carried out is using lever manual. Material: cast iron (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever 90°, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position or 5/3 - five-way, three-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet repair intended for valve fast trigger series VSR. set contains a gasket flat with rubber NBR and gasket lip with polyurethane. available in three sizes: 1/8", 1/4" and 1/2".
Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete reel Intended m. in. for conveying air and cold and hot water. Do mounting inside and on outside rooms. spring rewind tested for 30000 cycles winding and unwinding. compliant with the directive ATEX II 3 GD c IIB TX. standard in set found high quality hose polyurethane of spring anti-kink and coupling swivel allowing on free operation with connection for it e.g. a tool pneumatic. length hose supply: 1.5 m. Material: steel carbon painted powder. sealing: Viton. Operating temperature: up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic reel drum of steel acid-resistant Intended for cold and hot water, oil, greases and other media. spring rewind tested for 25000 cycles winding and unwinding. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. W set stopper for hose. A reel not is equipped in hose, which should order separately. A bracket swivel or additional A bracket fixed for fast removal (e.g. in winter) ordered separately. advantages: Swivel coupling of steel AISI 304, sealing Viton. Material: steel AISI 304. sealing: Viton. Operating temperature: up to +130°C (without hose).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle RM for unblocking and unclogging sewers with a hole centric. Connection: 1/4" BSP female. Material: steel stainless. Working pressure: up to 300 bar. Diameter: 19 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable, light and strong hose suction-delivery intended for conveying water, sewage, sludge, liquids non-corrosive, fertilisers natural (slurry). Layer inner with smooth rubber synthetic, resistant to sludge and sewage. corrugated Layer outer ensures small radius bends and is resistant to ozone, conditions atmospheric and aging. intended for applications agricultural, construction and industrial, used for emptying septic tanks, as hose suction for pumps water and sewage, for dewatering and irrigation, for tankers. can be used for extraction air, dust and for bulk materials. assembly – depending on the diameter and type fittings using bands steel, straps, clamps or ferrule clamping. Inner layer: black synthetic rubber (SBR). Reinforcement: cord synthetic, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality socket water quick coupling NiTO 1/2" with thread external and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils). For the valve, an EPDM O-ring.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation with media food, also containing oils and fats. Not is suitable for water potable. Marked on bellows white stripe. Inner layer: white NBR rubber (NBR). Reinforcement: cord nylon. Outer layer: rubber CR (chloroprene). Flanges: galvanized carbon steel. Operating temperature: od -20°C up to +90°C (momentarily +100°C depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting rotational AK with thread external tapered BSPT of spring anti-kink o length 200 mm. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, bending of the hose and rotation of the gun are required. spring constitutes additional protection hose. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting push-in with an O-ring for gun high-pressure. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance without insulation thermal type MT1 intended for a high-pressure washer. Connections: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.



















































