- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Standard, made of steel AISI 304. Standard to basic system clamping using band in rolls, formed in clamps on hose o any diameter (recommended use double loop tape). should purchase separately Buckles with „noses” securing end tape po bending. assembly using tools BD-C07599, BD-C00189, BD-C00399. length: 30.5 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: Viton (FPM). range temperatures (approximate): od -20°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible five-layer hose for compressed air. light, very pliable even in low temperatures, resistant to elongation. antistatic (R 6 Ω/m, EN ISO 8031), resistant to elevated temperature ambient, adapted for disinfection. specially designed for apparatus breathing in accordance with the standard EN 14593 and EN 14594. used in industry paint, petrochemical, construction and power nuclear. On special order DN6 and DN10 in color green. Inner layer: black, antistatic PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar (6 bar for temperatures 70°C). Operating temperature: od -20°C up to +70°C (momentarily up to +80°C), working pressure depends on temperature.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 1SC, EN45545-2. Inner layer: black synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, flame-retardant synthetic rubber. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying granulates and other bulk materials. intended for use in many types industry. used m.in. granulate plastics, materials insulating, waste, sand and other materials construction. fairly pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). can be available other diameter. besides version standard P7 M PU AE hose Available is in version P7 M PU EL conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be ona used in zones hazard explosion po carrying out analysis risk. Hose material: polyether-polyurethane. Wall thickness measured between the spiral: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose with fibres conductive in braid (R 4 Ω/m) intended for solvents, paints, isocyanate, polyol, liquids based on water. standards: ISO 8031, SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid with fibres conductive. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible hose intended for pressure cleaning sewers. is characterized very high resistance on abrasion. supplied as complete line with fitting. line has red marker in distance 0.5 m od fittings. available other fittings and length - contact with Tubes International. Inner layer: black, smooth synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, smooth synthetic rubber. Working pressure: 300 bar. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible hose intended for conveying substances food, pharmaceutical and cosmetic: water, juices fruit, beer, wine, vinegar, alcohols o a concentration up to 96%, milk and its dairy products, creams, soaps, substances aromatic, pigments and other. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. extruded, completely smooth Layer inner and outer hose facilitates Flow rate and cleaning. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. use for high-proof alcohol (its vapours or other flammable substances) requires taking into account hazards associated with electricity static. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: a polyester braid. Working pressure: from 7 bar to 12 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece insert clamp DIN 3015 type 201 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: green polypropylene. Operating temperature: od -30°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling 90° with fitting for hose with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality plug water quick coupling NiTO 3/4" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug BPS quick coupling without valve with thread internal BSP for lances, guns and equipment washing. Material: steel carbon, galvanized. Working pressure: 3100 bar. Operating temperature: +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible, popular hose, PVC general use. used for water, air, light chemicals in agriculture, horticulture, industry and for use domestic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: green clear PVC. Working pressure at a temperature of 20°C: from 10 bar to 17 bar - depending on the diameter hose. Operating temperature: od -5°C up to +60°C. As the working temperature rises, the hose's working pressure value decreases.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLock intended for production straps clamping. lock for tape o wide 8 mm or 14 mm. Material lock: steel AISI 304 or AISI 430. Material screws: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap coupling CAMLOCK DP made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling tee "T" ORFS with thread external UNF (sealing O-ring in groove flat surface face). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter two-piece for high-pressure equipment washing with connection metric M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic reel drum MINI used in industry food, chemical, plants production, workshops repair, dairies, slaughterhouses, agricultural holdings, stations petrol, treatment plants sewage etc. equipped in mechanism spring, which po light pulling hose causes its winding. supplied is with a hose PVC intended for water and air. Material: PVC. Operating temperature: od -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket SAFLOK® D with a thread internal BSP is a variant of the CAMLOCK coupling with protection against accidental opening of the coupling. The protection consists of resilient latches placed in the levers of the socket. When the lever is closed, the latches lock automatically. Unlocking during opening requires pulling back the latches. socket SAFLOK® D is compatible with other CAMLOCK couplings made in accordance with the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. The 1/2" size coupling has a 1/2" thread and a 3/4" socket. Material: steel AISI 316. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP with 1 eye for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: galvanised carbon steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for conveying LPG (Liquid Petroleum Gas) in accordance with the standard EN 589 in tankers, installations fuel, stations fuels. has certificate Germanisher Lloyd. Also available with ASA 300 flanges. Marked on the bellows with a single orange stripe. Inner layer: conductive NBR rubber. Reinforcement: cord nylon. Outer layer: conductive rubber CR. Flanges: galvanized carbon steel. Operating temperature: od -20°C up to +90°C (momentarily +100°C depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug venting with valve check and an O-ring mounted in upper parts bowl. opens during rise pressure in tank (turbulence oil). prevents penetration contaminants for the system during suction oil hydraulic. pressure opening valve check: 0.15 ÷ 0.3 bar. Material: aluminum (body), steel (A guard), guarnital (washer fibre). Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA mounting foot (angle bracket) Intended for actuator ISO 15552 series STD, series 3, "two flat", o diameter od 32 mm for 125 mm, model A. W set: 2 screws. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe non-freezing high-pressure AURA AF LP water gun for industrial applications. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet terminated thread internal 1/4" BSP. Gun Available is also with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 180 bar. pressure The permissible: 220 bar. Flow rate: 30 l/min. Leakage only below 10 bar. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, very flexible, unreinforced hose manufactured in Great Britain. intended for pressureless (or under very low pressure) conveying air, water and liquids in use general-industrial, for light chemicals (e.g. diluted acids and bases), in use laboratory, on level gauges and as A guard pipes, lines, cables etc. The hose material contains no phthalates, silicone or cadmium and complies with the REACH, RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). The stated working pressure is the approximate value of the recommended working pressure at a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: od -20°C up to +55°C (momentarily up to +65°C, working pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material clamp: rubber. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40° up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal Gun for air, water a also liquids non-explosive. intended mainly for blowing out contaminants, also in hard-to-reach places. is characterized high force air blowing, with the possibility regulation rate flow. light The design, ergonomic shape gun and low force press trigger ensures large comfort use. standard Gun equipped is in socket with thread 1/4" BSP or 1/4" NPT. this model Available is in version with nozzle 90 mm bent Star-Tip, replaceable. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. compliant of the standard OSHA 1-13.1. (European Agency safety and Health in use). wide range additional accessories allows on adjustment for specific requirements applications. Material: POM (body), brass (valve) sealing: NBR. Working pressure: 16 bar. pressure bursting: 64 bar. Operating temperature: od -20°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocknut for use in couplings cast iron type EE used in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial, high quality, ergonomic Gun NITO II for water. A handle separated od path flow hot water, co ensures comfort the operator. parts internal with aluminum, brass and steel stainless. housing with high-strength plastic Orgalloy resistant to impact. W set is found : plug NiTO SC with protection against disconnection 3/4", socket NiTO SC with protection against disconnection 3/4", plug NiTO 3/4", socket NiTO 3/4" and three clamps clamping. quick coupling made are with brass chrome-plated, clamps clamping made are of steel stainless. seal: EPDM / HBR. has smooth adjustment flow and lock trigger. interchangeable nozzles outlet. Working pressure: 25 bar. Flow rate: 20 ÷ 60 l/min (5 bar) depending on mounted nozzle. Flow rate with nozzle standard: 40 l/min. Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection on tap Available with thread internal 1/2", 3/4" or 1" allows connection hose garden with mounted quick coupling for source current water. Material: PVC. Working pressure: up to 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight ORFS with thread external metric (gasket elastomer o cross-section rectangular), type EVGE-ME. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA monoblock Directional valve spool YFM35 Controlled hand lever of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural etc. standard equipped in valve safety type C (set on 140 bar) and spools type 1. Material: cast iron (body), steel hardened (spools). sealing: NBR. maximum Working pressure: 315 bar. maximum pressure return: 25 bar. Operating temperature: od -20°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Standard, made of steel AISI 316. Standard to basic system clamping using band in rolls, formed in clamps on hose o any diameter (recommended use double loop tape). should purchase separately Buckles with „noses” securing end tape po bending. assembly using tools BD-C07599, BD-C00189, BD-C00399. length: 30.5 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring type TWO for use in couplings tankwagen 4" - MB, MKV and MK. Material: Viton (FPM). range temperatures (approximate): od -20°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA standard gasket for the female part (socket) of a CAMLOCK coupling. Material: NBR. Operating temperature: from -40°C to +93°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic thread sealant. Sealing of hydraulic and pneumatic systems. medium viscosity, medium strength – disassembly possible. Gap maximum 0.15 mm. color: brown. Operating temperature: od -60°C up to +150°C. Packaging of the "pen" type with a capacity of: 20 and 50 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o increased flexibility (radius bending 50% better in ratio for standard standards). Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R13, SAE 100 R13, ISO 3862-1 R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 38). Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 350 bar to 380 bar depending on the diameter hose. Operating temperature: od -40°C up to +121°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, sand, gravel, pebbles, substrate agricultural. used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and fairly dense spiral reinforcing ensures high resistance to pressure and vacuum. smooth inside, non-compressible, fairly pliable (r=2.5xD), flexible also in low temperatures. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed) or assembly special on ends industrial e.g. flange. Other diameters may be available on special order. versions: P3 SV PU – with polyester – polyurethane, very resistant to abrasion; P3 SV PU AE - version with polyether – polyurethane, resistant to abrasion, resistant to microbes and hydrolysis, compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyester-polyurethane (P3 SV PU), polyether – polyurethane (P3 SV PU AE). Wall thickness measured between the spiral: 2.5 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is commonly used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. Available also in version with microperforation (for gases and air), Marked letters "MP" on the end index. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 375 bar - depending on the diameter. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).



















































