0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Container pressure repeated use for filling fluids technical, equipped in A universal valve filling ("automotive"). capacity: 400 ml. Working pressure: 5 ÷ 10 bar. strength: 80 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate plug 90° quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug reducing, type PGJM

          All products | Push-in fittings
          0 €
          Plug reducing on one side terminated tube (spigot), on the other side terminated coupling push-in, series S, type PGJM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling NiTO SC, with protection against disconnection, with thread external. Do use for hot water (above +60°C) in these places installation, where are used directly through the operator and often disconnected. Do gun NiTO II or Heavy Duty. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible pressure hose delivery intended for conveying water, juices, drinks and other products food in temperature up to +40°C. no phthalates in material hose recommends go for conveying milk and its dairy products and alcohols o a concentration up to 50% and temperature up to +40°C. not recommended for oils and greasy substances food. used also widely in industry and laboratories for compressed air, gases, light chemicals. Reinforcement a braid spiral ensures high strength pressure and low deformation hose under pressure also at pulsations pressure (in the scope pressure working). Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: a polyester braid. Working pressure: from 9 bar to 27 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF NTC series COMPACT "N" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 4174 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female. Operating temperature: od -20°C up to +110°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle rotary RM for unclogging sewers without hole centric. Connection: 1/4" BSP female. Material: steel stainless (body), brass (rotor). Working pressure: up to 150 bar. Diameter: 19 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Transparent screen protecting the operator against contaminants; equipped in a sleeve with rubber nitrile facilitating assembly on any the height tubes (nozzle). Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket SAFLOK® C with fitting for hose, steel stainless

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket SAFLOK® C with fitting for hose is a variant of the CAMLOCK coupling with protection against accidental opening of the coupling. The protection consists of resilient latches placed in the levers of the socket. When the lever is closed, the latches lock automatically. Unlocking during opening requires pulling back the latches. socket SAFLOK® C is compatible with other CAMLOCK couplings made in accordance with the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. Material: steel AISI 316. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality socket water quick coupling NiTO 1" with fitting for hose and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils). For the valve, an EPDM O-ring.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ring clamping EAR CLIP with 1 eye for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow reducing 90° with thread internal BSP, cast iron, type 90/6

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Elbow reducing 90° with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange swivel with joint ball for mounting on rear parts cover actuator. W set: 4 screws with washers. Material: aluminum cast (flange), steel (joint), steel carbon galvanized (screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Compensator rubber threaded 1504

          All products | Rubber compensators
          0 €
          Intended for absorbing vibration and vibration and movements linear and angled in installations water. Not serves for conveying media containing oil. has certificate PZH for water potable. Inner layer: EPDM rubber. Reinforcement: cord nylon. Outer layer: EPDM rubber. Connections: BSP female, cast iron, galvanized. Operating temperature: od -10°C up to +100°C (depending on medium).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lance extension with insulation thermal, intended for a high-pressure washer. length: 375 mm. Connections: (inlet) 1/4" BSP male / (outlet) M22x1.5 female. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Chain CAMLOCK, steel stainless, type CH

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Chain for coupling CAMLOCK. length: 200 mm or 300 mm. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose suction-delivery intended for greasy and non-greasy substances food, demanding use rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. especially recommended for handling and heavy conditions use. widely used in industry food in dairies and oil mills. Layer inner made with NBR resistant is on standard used in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable, abrasion and conditions atmospheric. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards. RAL (German institute ensuring quality and certification). Vacuum: 0.9 bar. Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue rubber CR. Working pressure: 10 bar. Operating temperature: od -20°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A tool for mounting steel bands system Band-It® with built-in a knife for cutting excess tape and spring a gripper improving operation. Allowed band width: 1/4" ÷ 3/4". Maximum wall thickness tape: 0.76 mm. Application: Band-It® Standard and Band-It® Junior - in this case necessary is use adapter BD-J00199.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A guard rubber for nozzle with a female NPT thread

          All products | Fittings for hoses for pressure washers
          0 €
          A guard rubber for nozzle with thread internal NPT for fastening on lance, protecting delicate surfaces cleaning against scratches. Intended for nozzle with thread external 1/4″ NPT. Material cover: synthetic rubber. Material Connections: steel stainless. Working pressure: 500 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          An AKBO HEAVY DUTY water gun for use in first and the other Zone hazard explosion, (ATEX). has certificate TüV. made of steel stainless AISI 316, cover with rubber EPDM, the gasket made of Viton. has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Connection: 1/2" BSP female. Working pressure: 24 bar. Maximum Operating temperature: +60°C. Flow rate: 30 l/min (5 bar), 70 l/min (24 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connection with thread internal on tap 3/4" and reduction 1/2" or on tap 1" and reduction 3/4" allows connection hose garden with mounted quick coupling for source current water. Material: PVC. Working pressure: up to 6 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting ORFS with thread internal BSP (sealing on the thread – PTFE tape or anaerobic sealant), type GAI-B. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A monoblock Directional valve spool YFM80 Controlled levers manual of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural, etc. standard equipped in valve safety (set factory on 180 bar) and spools type 1. Material: cast iron (body), hardened steel (spools). sealing: NBR. maximum Working pressure: 250 bar. maximum pressure return: 50 bar. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Gasket metal-rubber DOWTY, metric, for connections high-pressure. Material: washer - steel AISI 316L, sealing - Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for discharge fumes welding P2A1000

          All products | Ducting and ventilation hoses
          0 €
          Light, exceptionally flexible and compressible hose intended for air conditioning, discharge and air blowing air, extraction fumes welding. Widely used for arms ducting, ventilation, heating tents, drying the structure construction. self-extinguishing and non-flammable (non-spreading flame) in accordance with UL94 V-0. resistant to hydrolysis and microbes. Other diameters are available on special order in the scope 30 ÷ 800 mm and color: black, blue, white and yellow. Assembly of the hose on connectors with bridge clamps (prawo-handed). Hose material: fabric polyester impregnated grey PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -30°C up to +80°C (momentarily up to +100°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose suction-delivery intended for systems exhaust cooled water engines diesel boats motor for 24 m length and yachts (free discharge under low pressure mixed exhaust gases and water cooling). used in sections between element installation. Layer inner resistant to exhaust gases. steel spiral ensures resistance to vacuum. Layer outer resistant to abrasion, oil and conditions atmospheric. hose Available is in two versions layer outer: smooth - AMALFI LL and serrated - AMALFI LO. compliant with ISO 13363:2016 type 2B, SAE J2006:2013 type R2. has certificate type Lloyds LR2003044TA and RINA DIP021521CS/002 (AMALFI LL) and RINA DIP021521CS/003 (AMALFI LO). Other diameters are available on special order and hose delivery AMALFI CORD (without spiral steel). Inner layer: black synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. pressure bursting: ≥2.5 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. Do use in the vicinity transformers and installation electric medium and high voltage. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON agent multipurpose W44T, spray

          All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings
          0 €
          High quality agent for work service and maintenance in industry and applications workshop. W44T loosens seized screws, displaces moisture, eliminates squeaking and squeals, cleans dirty surfaces metallic, secures and preserves tools and instruments. Packaging - spray 50 ml or 400 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 double, polypropylene, type 301

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 301 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: green polypropylene. Operating temperature: od -30°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate plug bulkhead quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Cap for coupling push-in series R, type R9. Material: plastic plastic. Working pressure: 12 bar. Operating temperature: od -20°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal two-piece ball valve with full bore and a lock lever type 2006SC/SM3, intended for installation industrial. It can be used for air, gases, water, steam water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. Material body: cast steel stainless CF8M. Material the ball: cast steel stainless CF8M. Material lever: steel AISI 304. sealing the ball: PTFE / RTFE. sealing stem: PTFE. Connection: BSP female. Operating temperature: od -20°C up to +200°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. size the directional valve: 1/8", 1/4", 3/8", 1/2". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve check type 2050 intended for securing installation against a stream return the medium working. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve. valve must be mounted in accordance with direction flow the medium indicated on body. pressure working dependent is od temperatures use. Material body: cast steel stainless CF8M. Material spring: steel AISI 304. butterfly valve: steel AISI 316. sealing: PTFE. Connection: BSP female. Operating temperature: od -20°C up to +200°C. Working pressure: up to 13 bar (+200°C), up to 50 bar (+40°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter for high-pressure equipment washing, A nut po obu sides, brass

          All products | Fittings for hoses for pressure washers
          0 €
          Adapter for high-pressure equipment washing with connection metric M22x1.5 po obu sides. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Automatic reel drum of steel acid-resistant Intended for cold and hot water, oil, greases and other media. spring rewind tested for 25000 cycles winding and unwinding. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. W set stopper for hose. A bracket swivel or additional A bracket fixed for fast removal (e.g. in winter) should order separately. A reel not is equipped in hose, which also should order separately. Dla diameter 3/8" length hose that holds A reel is 17 meters, for diameter 1/2" - 10 meters. Material: steel AISI 304. sealing: Viton. Operating temperature: up to +130°C (without hose).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A cross with thread internal BSP, cast iron, type 180/34

          All products | Fittings (pipes, fittings and connectors)
          0 €
          A cross with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nozzle for unclogging sewers without hole centric, type RM

          All products | Hoses and fittings for sewage
          0 €
          Nozzle RM for unclogging sewers without hole centric. Connection: 1/4" BSP female. Material: steel stainless. Working pressure: up to 300 bar. Diameter: Ø19 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter mesh intended for installation water, oil and gas. serves for capturing and removing contaminants mechanical with installation. Filter must be mounted in accordance with direction flow the medium marked on body. pressure working dependent is od temperatures use. Body material: AISI 316 steel. sealing: PTFE. insert filter: steel AISI 316. Connection: BSP female. Operating temperature: od -20°C up to +200°C. Working pressure: up to 13 bar (+200°C), up to 50 bar (+40°C). Diameter hole filter: 1 mm. density holes: 2 mm.
        Go to Top