- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling TEMA STANDARD (NORDIC RANGE) with a shut-off valve and an eliminator and thread internal BSP. socket has additional O-ring thanks to which is suitable for installation gas. has also ring securing against accidental disconnection. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: brass chrome-plated for size 1", steel galvanized above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: Viton or NBR. Operating temperature: od -30°C up to +100°C (for NBR), od -15°C up to +200°C (for Viton). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose of special blend PVC intended for oils, fuels and other products petrochemical based on hydrocarbons. Material hose has elevated resistance to leaching plasticisers and retains its flexibility even po long use. withstands repeated bending, a simultaneously exhibits excellent resistance to aging. intended for installation fuel: pumps, burners, equipment heating, installation oil. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). Not recommended for gasoline, in particular for intensive use or more demanding applications (in such case consider hose TECHNOBEL PU). It can be used for some products chemical: diluted acids, bases and alcohols. smooth surface inner and outer hose and translucent wall enable visual control flow. used widely in industry automotive, assembly shops, industry plastics, industry wood, workshops automotive, agriculture, forestry and services municipal. Inner layer: greenish transparent PVC. Reinforcement: a synthetic braid. Outer layer: greenish transparent PVC. Working pressure: from 8 bar to 13 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C (working pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter JIS type A403 with thread external BSP (sealing inverted 60° cone) - TOYOTA and with thread external BSPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing metric front for use in connectors type LET-LOK®. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple GL series G with thread internal BSP ensures correctness lubrication mist oil equipment in installations pneumatic. W set found angle bracket/A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 3200 l/min - size 200, 5400 l/min - size 300, 8300 l/min - size 400, 12000 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling NITTO KOHKI series HSP CUPLA with thread internal BSPT. Manufactured in Japan of special steel alloy. is characterized excellent durable, resistance on vibrations and pressure pulsating. used m.in. in installations hydraulic equipment casting, in which available sudden changes pressure. can work on vacuum. Application: hydraulics power (oil hydraulic). Material: steel nickel-plated. sealing: NBR. Operating temperature: od -20°C up to +80°C. Working pressure: up to 206 bar (depending on sizes quick coupling). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose suction-delivery intended for conveying liquid products industry petrochemical. It can be used for oil drive and gasoline. standard version CARACAS recommended is for fuels o content up to 30% hydrocarbons aromatic, whereas version CARACAS 50, at more aggressive fuels (up to 50% compounds aromatic). It has a copper wire ensuring electrical continuity between the hose ends. excellent for systems transfer. Layer outer resistant is on abrasion, oil, ozone and conditions atmospheric, a thanks to corrugation, hose is very pliable and flexible – its minimal radius bends is only 2.5 x Diameter inner. is also light and easy in handling. excellent for systems transfer, tankers fuel in not very heavy external conditions use. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid, spirals steel. Outer layer: black synthetic rubber. Working pressure: 6 bar. Vacuum: 0.6 bar. Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling reducing with thread external and internal BSP for use in connections pipe installation industrial, e.g. for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, extremely flexible and pliable, o small radius bends hose, PVC with inner layer with polyurethane (PU, polyester-polyurethane). thanks to sound resistance chemical polyurethane hose It can be used for gasoline, gasoline unleaded, oils, products petroleum-based and many solvents. is suitable for compressed air, also air oiled. Due to good resistance polyurethane on abrasion can be also used for conveying average abrasive powders or granulates. Not is whereas recommended for acids, bases and solutions water at temperatures above 40ºC. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). hose widely used we all fields industry. used also in agriculture for spraying agricultural (agents insecticides, pesticides, agents herbicides etc.). used for compressed air for tools pneumatic, guns for spray, painting, sandblasting etc. Layer outer resistant to carbon and solvents in the molds mist with spray. is suitable for mounting on drums. Inner layer: transparent polyurethane (PU). Reinforcement: a polyester braid. Outer layer: black PVC. Working pressure: from 12 bar to 20 bar, dependent od diameter hose and temperatures. Operating temperature: od -15°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° brass with thread external BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut lock type A108 with thread BSP for use for adapter type A107. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing metric rear for use in connectors type LET-LOK®. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling CEJN series 525 (NORDIC RANGE) with a shut-off valve and thread internal BSP. It is intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel coated zinc-nickel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: Viton or NBR. Operating temperature: od -30°C up to +100°C (for NBR), od -15°C up to +200°C (for Viton). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling plastic STORZ with fitting for hose intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. available with short fitting for hose. Coupling material: high-strength plastic. Material fittings: aluminum. Working pressure: 10 bar. gasket: black NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Tee "L" high-pressure, type A126 with 2 x thread external BSP (sealing 60° cone) and thread internal BSP (sealing 60° cone) and with. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket DN 9 quick coupling with fitting for hose, with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with thread internal BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling TEMA STANDARD (NORDIC RANGE) with a shut-off valve and an eliminator and thread internal BSP and NPT. intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: brass chrome-plated for size 1", steel galvanized above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: Viton or NBR. Operating temperature: od -30°C up to +100°C (for NBR), od -15°C up to +200°C (for Viton). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat Intended for fittings with thread internal. limited resistance to greases and oils. Material: black NBR rubber. Operating temperature: od -40°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose with connections intended for fittings sanitary (heat and cold water). Widely used for connections in installations industrial, central heating and air-conditioning. resistant to action glycol o a concentration up to 35%. the connection made with brass, ferrules of steel stainless (AISI 304). has certificate hygienic and approval technical for use in construction. Available on both sides with thread internal BSP and with thread internal and external BSP. Inner layer: black EPDM rubber (o elevated parameters). Reinforcement: external braid of steel AISI 304. Working pressure: 16 bar. Operating temperature: up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A303 with thread external NPT (sealing on the thread) and with thread internal NPT (sealing on the thread). Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling TEMA with thread internal BSP, compliant of the standard ISO 7241-1 B. socket (besides size 1/4" ) has additional a second O-ring, thanks to which ideal is suitable for installation gas. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases, chemicals). occurs also in version with an eliminator pressure static. interchangeable with quick coupling ISO-B other manufacturers. Working pressure: up to 400 bar (depending on size quick coupling). factor safety: 4:1. given pressure working refers to quick coupling connected. Material: brass chrome-plated (for socket o sizes 1/4" ÷ 1/2"), steel carbon, galvanized (for socket of size 3/4" and 1"). sealing: NBR (od -30°C up to +100°C), Viton (od -25°C up to +200°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA chain for a STORZ cap protecting against loss. Chain should select for specific size DN caps. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x140 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, very pliable, hose for conveying gasoline and oil drive, fire-resistant, for small vessels - recreational boats up to 24 m long. hose o pressure working 10 bar, manufactured method mandrel. intended for installation fuel engines stationary on ships, boats motor, yachts etc. Suitable for unleaded petrol, petrol with up to 10% ethanol added (E10 petrol), diesel oil and diesel oil with 10% FAME esters added (B10 – biodiesel). compliant with ISO 7840 type A1 (fireproof, permeability vapours fuels smaller or equal 100 g/m 2 /24 h), compliant with the directive 94/25/EC, certified RINA, compliant with SAE 1527, USCG type A1. Layer inner with black, smooth rubber synthetic, resistant to oils and fuels up to 50% content hydrocarbons aromatic. Reinforcement layers synthetic cord, a for hose POSEIDON LL additional spiral steel. Layer outer with black, self-extinguishing rubber synthetic, resistant oil and conditions atmospheric (resistance to fire: ISO 7840 Annex A: hose filled fuel should withstand flame through 2.5 min). POSEIDON : hose POSEIDON is soft a hose delivery without reinforcement spiral steel. the manufacturer recommended assembly hoses POSEIDON o diameter over 19 mm in installation in sections straight or o gentle (high) radius bends. hose is used in particular in installation filling tanks fuels boats. On special order Available hose POSEIDON o smaller diameters 6, 8.10.13.16 and 19 mm, o pressure working 10 bar. POSEIDON LL : hose POSEIDON LL has additional Reinforcement spiral steel, co ensures resistance to vacuum and kinking. hose is very pliable, its minimal radius bends corresponds only three times diameter internal and can be easily installed in tight spaces compartment engine boats. universal use and high quality hose make, that is on readily and often used through manufacturers greater yachts motor. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic (POSEIDON); cord synthetic, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with fitting for hose, without valve, used in industry for cooling moulds injection and casting parts with plastics and aluminum, for conveying hot oil. are straight in use and can be operated one hand. geometry plug: straight, 90°, 45°. Diameter bore: 8.3 mm (series 100.08) or 13 mm (series 100.12). Working pressure: 10 bar. Operating temperature: od -20°C up to +100°C (sealing NBR). Material: brass nickel-plated (Connection, sleeve and plug), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap with thread internal BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Tee high-pressure, type A127 with thread internal BSP (sealing 60° cone) and with 2 x thread external BSP (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling DYROS series 90 with thread internal without valve with thread BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with thread external BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose suction-delivery made of special, oil-resistant blend PVC. intended for conveying oils mineral and hydrocarbons and water industrial, sewage, liquid fertilisers, some chemicals – in particular tam, where elevated resistance PVC on carbon is required. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). It can be used for some products chemical – diluted acids, bases and alcohols. hose retains its flexibility even in sub-zero temperatures use, a its low weight and small radius bending ensure convenience and ease operation. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. smooth surface inner and outer. resistant to radiation UV, ozone, conditions atmospheric, abrasion. used widely in industry, agriculture, construction and road engineering. as hose reinforced spiral with hard PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above 40°C. Hose material: blue PVC. Reinforcement: spiral with white, hard PVC. Working pressure: from 2 bar to 5 bar - depending on the diameter hose. Operating temperature: od -25°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for water and non-corrosive media. used for installation sanitary, boilers, systems cooling. woven in in braid two red stripes inform o resistance hose on elevated temperature medium. Inner layer: non-toxic EPDM rubber. Reinforcement: braid of galvanized steel. Working pressure: from 6 bar to 15 bar, depending od diameter hose. Operating temperature: od -10°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap STORZ, with high-strength plastic, fitted with a chain protecting against loss, Intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material body: high-strength plastic. Cover material: aluminum. Working pressure: 10 bar. gasket: black NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter Elbow 90° high-pressure type A114T with thread external BSPT (sealing on the thread) and with thread internal BSP, with a nut swivel (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling DYROS series 90 with thread external and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench assembly for fittings fire STORZ o sizes B (75) and C (52). Material: malleable cast iron.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° brass with a bracket with thread internal BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose rubber reinforced a braid of galvanized steel ensuring high resistance pressure, perfectly works in installations oil small vehicles, installations fuel and equipment industrial. intended for gasoline and oils petroleum-based such as e.g. oil gear, heating czy drive. Layer inner made with rubber NBR in connection with a braid in the molds mesh (braid), make that hose is simultaneously soft and flexible. The maximum working temperature depends on the medium: for gasoline, gasoline unleaded, fuels up to 50% content hydrocarbons aromatic: +40°C; for diesel oil (diesel): +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidising detergents: +80°C. Inner layer: smooth, black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 20 bar to 25 bar - depending on the diameter hose. Operating temperature: od -35°C up to +90°C (Maximum temperature use dependent od medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling plug with a shut-off valve and thread internal BSP. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing plug: NBR (temperature use od -25°C up to +100°C). Working pressure: up to 350 bar (depending on size quick coupling). Safety factor 4:1. Flow rate has been stated at Δp = 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug high-pressure JIS type A406 with thread external BSP (sealing inverted 60° cone) - TOYOTA. Material: steel carbon, galvanized.



















































