- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, multilayer hose fuel, Based on the requirements of the DIN 73379-3E standard (11/97). design: Layer inner with resistant chemical and temperature-wise Viton (FPM), Layer intermediate with epichlorohydrin (ECO), resistant to temperature and strength braid with fibres aramid, Layer outer with epichlorohydrin (ECO) – resistant to temperature, ozone, microcracks. Layer inner made of Viton ensures excellent resistance chemical on action hydrocarbons, products petrochemical a also many aggressive substances chemical and additives used for fuels, also in elevated temperatures use. especially recommended for biofuels based on esters methyl acids fatty (FAME) e.g. biodiesel B10, B20, B100. resistant to ester methyl acids fatty oil rapeseed (RME). It can be used for biopetrols containing alcohol ethyl e.g. E10, E100. resistant to esters phosphate (consists ofce also additives for fuels liquid). It can be used also for ordinary oil drive, gasoline, oils mineral. recommended for demanding applications under relative to high purity fuels, resistance to temperature and aging. is characterized low permeability hydrocarbons through wall hose. Inner layer: rubber FPM (Viton). Intermediate layer: rubber epichlorohydrin (ECO). Reinforcement: textile braid aramid. Outer layer: rubber epichlorohydrin (ECO). Working pressure: 10 bar. Operating temperature: od -40°C up to +125°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert used for hoses pneumatic o diameters inch. Diameter outer flange the insert must match with diameter external hose. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling STORZ with fitting for hose intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: brass. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 45° adapter type A304 with thread external NPT (sealing on the thread) and with thread internal NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter socket with fitting tube metric type LET-LOK® intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple (lubricator) series SKILLAIR®, with plates end, ensures correctness lubrication mist oil equipment in installations pneumatic. Size: 100, 200, 300. capacity bowl: 50 cm³ - size 100, 95 cm³ - size 200, 160 cm³ - size 300. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Flow rate: 1500 l/min - size 100, 3700 l/min - size 200, 5500 l/min - size 300 (at an inlet pressure of 6 bar and Δp = 1 bar). way filling oil: STD - version standard, filling through disassembly bowl or plug, CA - filling Automatic, replenishment only during use lubricator, CD - filling vacuum, drop pressure inside bowl allows its filling, CAML - filling Automatic with level minimum, CDML - filling vacuum with level minimum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free socket quick coupling type "flat-face" intended mainly for machine construction, in which available large strokes pressure. has stem securing against accidental disconnection. quick coupling can be operated one hand. depending on use should select appropriate Material seal. interchangeable with quick coupling ISO-F other manufacturers. standard: ISO 16028 (besides size DN5). Application: hydraulics power (oil hydraulic), industrial. Working pressure: up to 500 bar. Material: steel with coating zinc - nickel. sealing: NBR (od -25°C up to +100°C), Viton (od -15°C up to +200°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with thread internal BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, suction-delivery hose intended for conveying liquid products industry petrochemical, containing up to 50% compounds aromatic. Layer inner antistatic R 6 Ω. It has a copper wire ensuring electrical continuity between the hose ends and discharge charges electrostatic. excellent for systems transfer and thanks to external corrugation for applications demanding small radius bending. Layer outer resistant to abrasion, oils mineral, ozone, aging, conditions atmospheric and momentary contact with carbon. used for tankers fuel and special cars for cleaning sewers. Inner layer: black NBR rubber. Reinforcement: a synthetic braid, spirals steel. Outer layer: black synthetic rubber. Working pressure: from 10 bar to 16 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C (momentarily up to +120°C depending on kinds medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling STORZ with serrated fitting for hose intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: aluminum. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Tee "T" high-pressure type A127 with thread internal BSP (sealing 60° cone) and with 2 x thread external BSP (sealing 60° cone). Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and thread external metric. version "push-pull" - Automatic disconnection at accidental tensioning line. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR. Operating temperature: od -25°C up to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with thread internal and external BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut blanking Intended for blanking one with unused ports fitting (e.g. tee) o diameter inch. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling hot liquid asphalt, tar, products bituminous. used for loading and unloading tankers road, railway, in plants masses bituminous and in ports. Inner layer: black blend polyacrylic. Reinforcement: cord with wire steel, steel spiral. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -15°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing pilot REG P, series SKILLAIR®, serves for maintaining pressure air everywhere tam, where required is high accuracy its setting, at variable conditions use. W a valve practically eliminated friction, thanks to which is characterized on mentioned earlier high accuracy and low hysteresis. presence slight bleed air is necessary for correct use valve and not is a sign its damage. typical for valves reducing large dimensions (series 400). recommended use air filtered. Size: 1/4". range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female. Pressure gauge connection: 1/8" BSP female. Flow rate: 140 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter STORZ with thread internal BSP, with reducer, intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: aluminum. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic high-pressure adapter type A301 with threads external NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series SKILLAIR®, without plates end, serves for accurate removal contaminants liquid and solid, contained in compressed air. size retained contaminants depends od degree filtration the insert filter. Size: 100, 200, 300. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 2000 l/min - size 100, 3100 l/min - size 200, 5300 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and thread internal BSP. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR (temperature use od -25°C up to +100°C). Working pressure: up to 350 bar (depending on size quick coupling). Safety factor 4:1. Flow rate has been stated at Δp = 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSerrated connector STORZ for hoses. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA socket with thread internal BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery o extreme flexibility intended for conveying liquid products industry petrochemical, containing up to 60% compounds aromatic. appropriate for use in tankers automotive for transport oil drive, ethanol, gasoline, oils. Layer inner with black, smooth rubber Chemigum ® (NBR, resistance to oil: RMA class A). Reinforcement cord synthetic and two spirals with wire steel. Layer outer, deep corrugated, with black rubber synthetic Chemivic ® (NBR/PVC), resistant to action substances petrochemical, oils and greases and on abrasion. It has a copper wire ensuring electrical continuity between the hose ends – under a condition correct connection for ends. thanks to external corrugation, hose is extremely pliable, a for its bending needed is small force. its minimal radius bends, equal is diameter internal hose. external serrated reduces also resistance pulling hose po ground, a light The design facilitates operating a hose. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: black synthetic rubber Chemivic®. Working pressure: from 10 bar to 17 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +93°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap Intended for tubes precision o diameter metric. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A115 with threads internal BSP, with nut swivel (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series SKILLAIR®, with plates end, serves for accurate removal contaminants liquid and solid, contained in compressed air. size retained contaminants depends od degree filtration the insert filter. Size: 100, 200, 300. Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 2000 l/min - size 100, 3100 l/min - size 200, 5300 l/min - size 300 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling SNAP-TITE with thread internal BSP production American is characterized unique design valve, co allows on achieving laminar flows. depending on use should select appropriate Material coupling and seal. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). standard: MIL-C-51234. Working pressure: up to 155 bar (depending on size quick coupling), Safety factor 2:1. Material: brass. sealing: NBR (Operating temperature: od -35°C up to +120°C), Viton (Operating temperature: od -26°C up to +204°C). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector allows connection two coupling or fitting with fitting. Do connections required is on one side A nut, without rings (sealing occurs on cone), on the other side required is set - A nut and rings. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnion with thread internal / external BSP for use in connections pipe, e.g. installations water hot and cold. Material: brass. Operating temperature: od -10°C up to +100°C. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose rubber with external a braid of galvanized steel, intended for gasoline and oils petroleum-based such as e.g. oil gear, heating, drive. mounted in installations fuel and oil small vehicles and equipment industrial. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard. Layer inner with smooth, black rubber NBR. The external reinforcing braid of galvanized steel provides high pressure resistance. Hose material: black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 6 bar to 25 bar - depending on the diameter hose. Operating temperature: od -35°C up to +90°C (momentarily 110°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling STORZ with fitting for hose under a clamp RS intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: brass. Working pressure: 16 bar. gasket: black NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug with a hexagonal head with thread external BSPT, Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter socket with fitting tube inch type LET-LOK® intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross brass with thread internal BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer GR series G with thread internal BSP, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W set found A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 3000 l/min - size 200, 4000 l/min - size 300, 7500 l/min - 400, 12000 l/min - 600 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN series 525 (NORDIC RANGE) with a shut-off valve and an eliminator and thread internal BSP. socket has additional O-ring, thanks to which is suitable for installation gas. has also ring securing against accidental disconnection. It is intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel coated zinc-nickel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: Viton or NBR. Operating temperature: od -30°C up to +100°C (for NBR), od -15°C up to +200°C (for Viton). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling STORZ for hoses delivery with fitting for hose intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. available in version cast. Material: aluminum. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - A nut connector high-pressure type A704 with threads internal metric. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter GF series G with thread internal BSP serves for removing contaminants contained in compressed air in order to correct use element systems pneumatic. W set found A handle assembly. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Filtration grade: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: 1/8" BSP female ÷ 1". Condensate drain: automatic (A). Flow rate: 3100 l/min - size 200, 5000 l/min - size 300, 7500 l/min - size 400, 12000 l/min - size 600 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut for a connector type LET-LOK® Intended for tubes o diameter metric. Material: brass.



















































