- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling DYROS series 90 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "Y" with thread internal BSP for use in installations industrial, e.g. for air. Material: brass. Working pressure: up to 35 bar. Operating temperature: up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket lip Intended for hoses suction-delivery. Not is suitable for applications food. no resistance to greases and oils. Material: EPDM. Operating temperature: od -35°C up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose intended for conveying under higher pressure oils industrial, mineral, oil drive (EN 590:2010), biodiesel and oil heating (DIN 51 603 1÷5). is suitable also for compressed air, liquids cooling based on glycol. Layer inner with black, smooth rubber NBR, antistatic R 6 Ω/m (EN ISO 8031:2009). Reinforcement strength a braid textile ensures factor safety 4 : 1. resistant to small vacuum for ok. 0.6 bar. Layer outer with black, smooth rubber SBR / NVC (NVC - blend NBR and PVC) is resistant to oil, ozone and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: a polyester braid. Outer layer: black rubber SBR/NVC. Working pressure: 40 bar. Operating temperature: od -45°C up to +100°C for fuels and oils, od -45°C up to +70°C for air.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling SNAP-TITE with thread internal BSP production American, without valve. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Working pressure: up to 155 bar (depending on size quick coupling), Safety factor 2:1. Material: brass. sealing: NBR. Operating temperature: od -35°C up to +120°C). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A201 with thread external BSPT (sealing on the thread) and with thread external NPT (sealing on the thread). Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free plug quick coupling type "flat-face" intended mainly for machine construction, in which available large strokes pressure. plugs available also in version with an eliminator pressure static. quick coupling can be operated one hand. depending on use should select appropriate Material seal. interchangeable with quick coupling ISO-F other manufacturers. standard: ISO 16028, except for size 3/16". Application: hydraulics power (oil hydraulic), industrial. Material: steel with coating zinc - nickel, except size 3/16" coated coating zinc. Working pressure: up to 720 bar. sealing: NBR (od -25°C up to +100°C), Viton (od -15°C up to +200°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "Y" brass with thread internal BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat Intended for fittings with thread internal. limited resistance to greases and oils. Material: white NBR rubber. Operating temperature: od -40°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft, flexible, extruded hose delivery for conveying gasoline and oil drive at low pressure, fire-resistant, for small vessels - recreational boats up to 24 m long. intended for installation fuel engines stationary on ships, boats motor, yachts etc. Suitable for unleaded petrol, petrol with up to 10% ethanol added (E10 petrol), diesel oil and diesel oil with 10% FAME esters added (B10 – biodiesel). compliant with ISO 7840 type A1 (fireproof, permeability vapours fuels smaller or equal 100 g/m 2 /24 h), compliant with the directive 94/25/EC, certified RINA, compliant with SAE 1527, USCG type A1. Layer inner with black, seamless rubber synthetic, resistant to oils and fuels up to 50% content hydrocarbons aromatic. Reinforcement synthetic a braid textile. Layer outer with black, resistant to fire, seamless rubber synthetic, resistant to aging, greases, conditions atmospheric and temperature (resistance to fire: ISO 7840 Annex A: hose filled fuel should withstand flame through 2.5 min). Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: black synthetic rubber. Working pressure: from 2.5 bar to 3.4 bar - depending on the diameter hose. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 90 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A116 with threads external BSPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" brass with thread external BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket Intended for hoses delivery. Do applications food (for contact with water potable - indexes marked on the end digit "05"). Material: white NBR rubber. Operating temperature: od -40°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very strong delivery hose for aviation fuel, intended for direct pressurised refuelling of aircraft. can be also used in operations conveying fuels in airport tankers – dispensers, in operations not demanding large vacuum. designed specially for kerosene (kerosene aviation - fuel for turbine engines aviation e.g. JET A1), gasoline aviation and fuels o content hydrocarbons aromatic up to 50%. It can be used on reels drum. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers high-strength cord synthetic. Layer outer with black, antistatic, self-extinguishing rubber chloroprene (CR), resistant to abrasion, contact with carbon, conditions weather. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω ‹ R ‹ 10 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type C/Ω) EN ISO 1825, EN 1361, BS 3158, EI 1529. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C (for fuels aviation acc. to EN 1825).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug DN 9 quick coupling with thread external BSP and metric, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body plug, valve), steel stainless (spring).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet seals for socket NORDIC RANGE. W composition set include 2 o-rings + gasket flat, for size 3/16 set seals consists with 1 an O-ring. Material: NBR, Viton. Operating temperature: od -30°C up to +100°C - NBR, od -20°C up to +200°C - Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A303 with thread external NPT (sealing on the thread) and with thread internal NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and thread internal BSP. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". used interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR. Operating temperature: od -20°C up to +100°C. Working pressure: up to 350 bar (depending on size quick coupling). Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° brass with thread internal BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose rubber with external a braid of steel stainless, intended for gasoline and oils petroleum-based such as e.g. oil drive, heating, lubricating. mounted in installations fuel and oil small vehicles and equipment industrial. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard. Layer inner with smooth, black rubber NBR. The external reinforcing braid of stainless steel provides high pressure resistance and is resistant to corrosion. The maximum working temperature depends on the medium: for gasoline, gasoline unleaded, fuels up to 50% content hydrocarbons aromatic: +40ºC; for diesel oil (diesel): +80ºC; for water and cooling liquids based on ethylene glycol: +90ºC; for air: +80ºC; for liquid, non-oxidising detergents: +80ºC. Inner layer: black NBR rubber. Reinforcement: external braid wire of steel stainless AISI 304. Working pressure: from 10 bar to 20 bar - depending on the diameter hose. Operating temperature: od -35°C up to +80°C (Maximum temperature use dependent od medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DYROS series 90 with thread external with valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. sealing valve: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Tee high-pressure, type A309, with thread internal 3 x NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket DN 9 quick coupling with thread internal BSP and metric, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling TEMA with thread internal BSP, compliant of the standard ISO 16028. Flat-face shut-off and Leak-free series IF quick couplings, thanks to appropriate construction valves in the socket and we plug is characterized low drop pressure, co ensures maximum efficiency economical. additional advantage is possibility operation socket one hand. fitted is in system safety prevents accidental disconnection. Application: hydraulics power (oil hydraulic), industry chemical (chemicals). occurs also in version with an eliminator pressure static. interchangeable with quick coupling ISO 16028 other manufacturers. Working pressure: up to 450 bar (depending on size quick coupling). factor safety: 4:1. given pressure working refers to quick coupling connected. Material: steel carbon, galvanized. sealing: NBR (od -30°C up to +100°C), Viton (od -25°C up to +200°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, resistant to abrasion hose delivery for designed specially for conveying fuels, other liquid hydrocarbons or for use as hose antistatic general purpose. lighter and more flexible than standard hoses rubber, has buoyancy (stays on surface) in water fresh and salt. flat at rest, co facilitates operation and storage. intended for conveying and handling products petrochemical, oils and fuels in refineries, industry and transport. used for refuelling vessels, cleaning tanks, applications firefighting and military. Meets the requirements of standards MIL-PRF-370J for hoses for fuels liquid. antistatic - has two externally longitudinally arranged copper cable ensuring continuity electrical between fitting hose easily available for correct connection for ends (R ‹ 0.02 Ω/m, exceeds requirements standards MIL-PRF-370J). inner surface hose smooth, not causing losses flow. resistant to abrasion, conditions atmospheric, hydrolysis, ozone, fuels and commonly used chemicals (recommended range pH: 5 ÷ 9). resistant to loads longitudinal during unwinding and pulling. Hose material: polyurethane (PUR) pressed in braid in process extrusion hose. Working pressure: from 7 bar to 11 bar - depending on the diameter hose (given pressure working for fuels). Operating temperature: od-50°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with thread internal BSP for use in connections pipe installation industrial, e.g. for air. Material: brass. Working pressure: up to 10 bar. Operating temperature: up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - A cross high-pressure type A125 with thread external 4 x BSP (sealing 60° cone). Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - A cross high-pressure type A125 with thread external BSP (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - A cross high-pressure type A128 with thread internal 4 x BSP, with a nut swivel (sealing 60° cone). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - A cross high-pressure type A128 with threads internal 4 x BSP, with nut swivel (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - A cross high-pressure type A312 with thread internal 4 x NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Elbow 90° high-pressure JIS type A505T with thread external metric (sealing inverted 60° cone) - KOMATSU and with thread external BSPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A306 with threads internal NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug high-pressure type A112A with thread internal BSP, with a hexagonal head. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug high-pressure type A707 with thread external metric (sealing 60° cone), under wrench hexagonal. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug with a hexagonal head with thread external BSPT. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple bulkhead hydraulic (high-pressure) with a nut, type A107, with threads external BSP (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A602 with thread external BSPT (sealing on the thread) and thread external metric (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter JIS type A502 with thread external metric (sealing inverted 60° cone) - KOMATSU and with thread external BSP (sealing 60° cone). Material: steel carbon, galvanized.



















































