- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VMPP limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in Connection pressure-gauge (1/4" BSP female) and holes assembly. Material body: steel galvanized. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 400 bar. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve gate type 2010 with seal metal-metal and stem non-rising, intended for installation industrial. allows adjustment or throttling, at small speeds flow. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material gate: brass. Material a knob: steel carbon. sealing stem: EPDM (1/2" ÷ 1.1/2"), NBR (2" ÷ 6"). Connection: BSP female. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check Controlled (lock hydraulic) type FPD used in systems hydraulic as element securing against uncontrolled movement actuator double-acting operation (retraction / extension piston rod). The permissible directions flow: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). Material: steel galvanized (body), hardened steel (stem). sealing: NBR. pressure opening: 3 bar, for size thread 3/4" - 0.5 bar. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling reloading TW type VK with thread internal BSP. intended for mounting on ends for hose or installations pipe having thread external BSP. made in accordance with the standard EN ISO 14420-6 (formerly DIN 28450). intended for liquids, bulk materials and gases (with the exception liquefied gas and steam). Material: steel AISI 316. pressure: od -0.8 bar up to 16 bar. Operating temperature: od -20°C up to +65°C (should take into account medium and Material seal). sealing thread (type the gasket GD): teflon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-on angled 90° with a male BSP threadT type C5 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "T" type AI 13200 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting push-in straight with thread external BSP, series S, type PCM. economical solution for connecting flexible hoses pneumatic o metric and inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection push-in straight with thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60000. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight through-flow for connecting hoses with plastics (for hoses polyurethane required minimum Hardness per Shore (A): 98°). Material: brass nickel-plated. Operating temperature: od -15°C up to +130°C. Working pressure: 30 bar. sealing: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling straight, series F type R 3 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for cleaning pipes metric, for use with devices ULTRACLEAN. sealing tubes with nozzle, occurs between surface front tubes, a restrictor is found inside nozzle. adapted for diameters external and wall thickness pipes metric. range sizes pipes: od 3 mm for 50 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling NiTO of steel stainless AISI 316L with fitting for hose. occurs in two systems 1/2″ and 3/4″. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Not can connect directly element with various systems e.g. socket 1/2″ with a plug 3/4″. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: od -20°C up to +150°C. Material seal: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket lever coupling ANFOR with a flange PN 10 for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling socket with thread external BSP with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: SBR. Working pressure: up to 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check Controlled type FPDL used in systems hydraulic as element securing against uncontrolled movement actuator double-acting operation (retraction / extension piston rod). The permissible directions flow: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). valve equipped in 2 holes assembly shown on photo. Material: body - steel galvanized (1/4", 3/8"), aluminum (1/2", 3/4"); stem - hardened steel. sealing: NBR. pressure opening: 3 bar. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a female metric thread, with seal on cone 24°, O-ring (DKOS), series heavy, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with A nut constant with thread internal BSP. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector CND Serrated intended for hoses rubber and plastic hoses industrial of steel AISI 304. intended for mounting using bands or straps. Do repeated mounting and removal. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Straight connector type AI 13460 intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA socket with thread internal BSP for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-adhesive tape PYROTAPE Intended is for wrapping ready lines and installation without ich disconnecting, in replacement cover PYROJACKET, a also for jej sealing on ends lines and objects o irregular shapes. resistant to splashes molten metal (not adhere for cover), flame, moisture and abrasion. wall thickness nominal tape to 3.73 mm. at mounting recommended is overlap 30-50% and use tape PYROSIL or straps of steel stainless. tape not should be used for lines dynamically bent. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple for soldering type LN, ball, sealing 60° cone, similar for DIN 7608. use a nut type UM (EC- 105…). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with thread external BSPT type A2, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp shell acc. to EN 14420-3 (DIN 2817) Intended for fastening hoses on ends with a flange securing. DN - Diameter inner hose x Wall thickness hose. Material: clamp - aluminum, screws and a nut - steel carbon galvanized. Working pressure: 25 bar (at appropriate selected hose and the tip EN 14420-3).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp two-part of integrated, cast "tongues" pressure. A clamp Intended for mounting ends and fittings with part hose („tail”) without lock (flange securing), made with high quality cast iron ductile galvanized (with yellow passivation free od chromium hexavalent). Material: malleable cast iron galvanized. at appropriate mounting, appropriate selected hose and the tip pressure working up to 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge right-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp right-handed OMP Intended is for mounting typical spiral hoses ducting of spiral with wire coiled in right e.g. P1PU, P2PU, P3PU, P7PU, SMARTFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 430 (bolt of galvanized steel).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard spiral made with wire steel Intended for securing hoses (cables) against abrasion, bending and crushing. standard length 5 m. Material: steel spring galvanized. gap between patterns: 5 mm (for wall thickness wire 1.6 mm), 6 mm (for wall thickness wire 2 mm), 10 mm (for wall thickness wire 3 mm).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal Gun class "premium" for air, created for more demanding users. effectively cleans air surfaces with contaminants. is characterized unrivaled force air blowing and the possibility regulating level. light The design, anti-slip A handle and ergonomic shape gun ensures large comfort use. resistant to impact and rupture housing qualifies device for use in difficult conditions. compliant of the standard OSHA 1-13.1. (European Agency safety and Health in use). Material: polyoxymethylene (POM), elastomer thermoplastic (TPE), aluminum (Al). sealing: NBR. Working pressure: 16 bar. pressure bursting: 64 bar. Operating temperature: od -20°C up to +60°C (16 bar) / up to +80°C (10 bar). level sound: 79 dB ÷ 103 dB.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWater gun for applications industrial BLUE KING made with brass (trigger, Bow and element valve of steel stainless, cover with rubber EPDM, seal with EPDM). thanks to slight sizes and ergonomic handle convenient lies in hand the operator. additional comfort ensures soft A guard made with rubber EPDM. easy and quick regulation nozzle, without needs use additional tools, allows on precision adjustment beam water for defined use. The design nozzle reduces wear water o 16% in ratio for standard guns for washing, not losing at this effectiveness cleaning. Gun equipped is in strong cover trigger, of steel AISI 304 in rubber cover, protecting against uncontrolled opening stream water and against damage. W lower parts handle installed is lock trigger Intended for continuous use. greater safety and high durability gun ensures double sealing stem. Connection: 1/2" BSP female. maximum Working pressure: 30 bar. Flow rate: 22.2 l/min (4 bar), 50 l/min (30 bar). Maximum Operating temperature: +95°C. weight: ok. 0.95 kg. dimensions: 190x145x50 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun filling type 223 with aluminum o flow capacity 60 ÷ 120 l/min. intended for oil drive. standard equipped in Connection swivel 1" BSP female, which prevents tightening hose. Not has system automatic cut-off fuels, therefore not is adapted for use with with dispensers on stations fuels. Not is intended for AdBlue® and gasoline unleaded. Diameter outlet: 25 mm. Material: aluminum. color: silver. Flow rate: 60 ÷ 120 l/min. connection swivel: tak.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun suction for removing dust and fine contaminants. W set end suction 250 mm, hose o length 500 mm and bag repeated use. Material: aluminum. Working pressure: 8 bar. pressure operating: 4 ÷ 8 bar. flow capacity: 500 Nl/min (at 6 bar). Operating temperature: -10°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWasher aluminum type D11 Recommended for seal couplings threaded type A and couplings BANJO series D. washer under thread M5 made is with polyamide.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P16 HPZ with manual drive pump hydraulic (drive not is integrated with head), Intended for workshops repair, vehicles technical, points service etc. compact The design and small weight allows on performing repairs in space failure. has An electric (battery) indicator of reaching the crimping diameter. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). Dla range diameters crimp e.g. od 10 for 45 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, where largest diameter crimp obtained on jaws main, which range is 38 ÷ 45 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPin STECKO as element securing connection plug and socket. Material: steel free-cutting, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° PUSH-IN for hose terminated thread external BSPT or metric. Do use in technology lubrication. recommended material joined hoses is polyamide. Body material: brass nickel-plated. Material seal: O-ring (HNBR). Operating temperature: od -30°C up to +150°C. maximum Working pressure: 150 bar (for liquids), 30 bar (for air).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o other size. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: steel AISI 316Ti.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter reducing of steel stainless type 62040 with thread external BSPT and thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer MWSFE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 90° (in order to avoiding direct stream)od axis silencer, is average depending on size 30 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee type C9 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.



















































