0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal pressure gauge industrial 63 mm with connection rear for installation FM 633, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI 304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection rear: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nipple with thread external BSPT, steel stainless, type VT116

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Nipple (Adapter) with both thread external BSPT for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, polyamide, type 101

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp shell SC (EN 14420-3/DIN 2817), steel stainless

          All products | Clamps and ferrules for fittings and hoses
          0 €
          A clamp shell acc. to EN 14420-3 (DIN 2817) Intended for fastening hoses on ends with a flange securing. DN - Diameter inner hose x Wall thickness hose. Material: steel AISI 316. Working pressure: 25 bar (at appropriate selected hose and the tip EN 14420-3).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp three-part for hose with lugs, DIN 20039 B, cast iron

          All products | Clamps and ferrules for fittings and hoses
          0 €
          A clamp three-part acc. to DIN 20039 B, with lugs ("claws") on flange securing fittings and with separate inserts - "tongues" pressure. Material: malleable cast iron galvanized. at appropriate mounting, appropriate selected hose and the tip pressure working up to 25 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Gun for removing rust and contaminants solid with hard-to-reach for grinders areas at use mineral material abrasive. Diameter grains 0.1 ÷ 0.8 mm depending on sandblasted material. version of tank with plastic o capacity 0.7 l. Diameter nozzle: 4 mm. pressure maximum: 8 bar. pressure operating: 4 ÷ 7 bar. Operating temperature: od 0°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Aluminum Gun for compressed air, intended for removing with surface all contaminants: liquids, fine chips, filings etc. regulation flow degree press lever. made method casting with aluminum. Gun equipped is in standard nozzle o diameter hole 1.5 mm, replaceable, with thread connection external M12x1.25. instead of nozzle standard install can other nozzles – see accessories for guns EWO. depending on the connection we distinguish Gun terminated a plug EUROSTANDARD 7.2 or fitting for hose o diameter 6 mm, 9 mm and 13 mm. Material: aluminum (cast). Diameter hole nozzle: 1.5 mm. pressure maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Water gun NiTO I

          All products | Low-pressure water spray guns
          0 €
          A universal light Water gun with adjustable nozzle outlet, smooth regulation flow and a lock trigger. Available with connection: plug NiTO 1/2", plug NiTO 3/4", 1/2" male or plug CLICK 1/2". housing: high-strength plastic. nozzle: brass chrome-plated. Working pressure: 6 bar for +40°C, 4 bar for +60°C. Flow rate: 8.5 ÷ 10.5 l/min (3 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Gun filling type 222 with polypropylene glass-fiber-reinforced intended for oil drive. standard equipped in Connection swivel 1" BSP female, which prevents tightening hose. Not has system automatic cut-off fuels, therefore not is adapted for use with with dispensers on stations fuels. Not is intended for AdBlue® and gasoline unleaded. Diameter outlet: 25 mm. Material: polypropylene glass-fiber-reinforced. color: black. Flow rate: 60 ÷ 80 l/min. connection swivel: tak.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimping press FINN-POWER P16 HP

          All products | Hose and tube assembling machines
          0 €
          Press P16 HP with a manual hydraulic pump drive, intended for repair workshops, service vehicles, service points, etc.. compact The design and small weight allows on performing repairs in space failure. An electric (battery) indicator of reaching the crimping diameter. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 38 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, at which largest diameter crimp for 45 mm, obtained on jaws main.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Line high-pressure, for cutting and cleaning water 1040 bar

          All products | Hoses and accessories SPIR STAR®
          0 €
          Ready, flexible, reinforced four layers with wire steel line high-pressure, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyamide. Reinforcement: two compact and two loose layer wire steel. Outer layer: black polyurethane. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1040 bar. Operating temperature: od -30°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard in the molds sleeve. strong, chemical resistant (except acid hydrofluoric, phosphoric and strong bases). completely resistant to flame. high content Clean silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. has properties electrical-insulating. Not emits smoke ani vapours. Wall thickness to ok. 1.65 mm. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Coupling - Tee for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule sheet-metal type H used for crimping hoses on ends not having lock connecting sleeve with fitting. can be also used on ends NiTO and on ends quick couplings. Do crimp ferrules sheet-metal can be used hoses low-pressure for ok. 30 bar (depending on the diameter), made with various materials, under a condition, that Material hose is sufficiently soft for this kinds crimp. primarily hoses rubber of reinforcement textile and hoses, PVC. exists also possibility crimping hoses with a steel braid (e.g. hose type PZ). diameter inner ferrule should select appropriate for diameter outer hose, returning simultaneously attention, to Diameter hole in front parts ferrule fit for used fittings. Diameter D2 - Diameter inner. Diameter D3 - Diameter hole. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Sleeve reinforcing type B12 recommended at connecting hoses with plastics for couplings with a ring cutting series B. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ferrule, steel AISI 304, type L

          All products | Clamps and ferrules for fittings and hoses
          0 €
          Ferrule type L Intended for crimping fittings type hydraulic (fittings as for hoses high-pressure type Z) in hoses industrial (rubber and plastic of reinforcement textile, optionally of spiral reinforcing - hoses suction - delivery). ferrule should select taking under attention diameter inner Dw and external Dz hose. length ferrule L not should be greater od length tail fittings Lk. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial, entirely made of steel stainless AISI 316, recommended for applications in industry food, chemical, marine, etc. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-S o wide tape 12 mm is characterized greater strength, higher permissible torque tightening od clamps ASFA-L (9 mm), guaranteeing strong clamp and is recommended for heavier applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: steel stainless AISI 316 (W4).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Gasket for coupling IBC for IBC containers

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Gasket for coupling IBC for IBC containers with a thread trapezoidal (O-ring for S60x6, above a flat gasket). Material: EPDM, LDPE, PTFE, Viton or Santoprene.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Gasket socket lever coupling ANFOR. Material: rubber NR/SBR. Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery used as A guard for cooling lines electric in industry metallurgical. Layer inner resistant to hot water cooling, water process, inhibitors corrosion and water with fluids non-freezing. Layer inner and outer non-conductive. resistance electrical R > 10 10 Ω/m, resistance to breakdown > 6 kV/mm. Layer outer resistant to aging, ozone, and heat radiation od electric furnaces curved, self-extinguishing (compliant with the standard ASTM C-542). radius bends specified for pressure 1 bar. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black rubber CR. Working pressure: 10 bar. pressure bursting: 30 bar. Operating temperature: od -40°C up to +90°C (momentarily +110°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for pressure washing cold and hot water SUPER HYDRO WASH

          All products | Hoses for high-pressure washers
          0 €
          Hose o elevated resistance to abrasion for use for equipment for washing pressure cold and hot water. resistant to detergents in solutions water used e.g. for washers pressure, oils, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: single or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for gas natural GWPB

          All products | Technical gases hoses
          0 €
          Flexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for air conditioning 3356

          All products | Hoses and fittings for air conditioning
          0 €
          The highest quality hose freon o high diameter intended for automotive (especially trucks and buses) and industrial systems refrigerant and air-conditioning working based on freon R 134a and R404a and oils mineral and synthetic PAG and POE. Layer outer resistant to oil, abrasion, high temperature and conditions atmospheric. standards: SAE J2064 type B (dimensions SAE 100R5). assembly: use bolted or crimped fittings special. Inner layer: black rubber IIR. Reinforcement: a steel braid. Outer layer: black rubber CSM, micro-perforated. Working pressure: 35 bar. Operating temperature: od -40°C up to +125°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for washer pressure THERMOCLEAN® AL 20

          All products | Low-pressure cleaning and washdown hoses
          0 €
          Flexible hose delivery used for washing cold and warm water and for conveying light chemicals, detergents and agents disinfecting. Do use in industry food. corresponding requirements European for substances food according to regulation 1935/2004 CE and the directive 2007/19/CE (simulant fluids A, B, C). should use fittings type hydraulic (TI-Z...) appropriate crimped ferrules, or fittings fixed using two clamps, which should be tightened po first use at higher temperature. fittings and ferrules should fix po earlier heating hose in water o temperature +60°C through 30 seconds. Inner layer: white, smooth PVC. Reinforcement: cord synthetic. Outer layer: blue, smooth PVC. Working pressure: 33 bar. Operating temperature: od -15°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for extraction dust and dust SMARTFLEX® 0.6

          All products | Ducting and ventilation hoses
          0 €
          Light and flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. pliable and flexible, also in low temperatures. less compressible than hose SMARTFLEX® 0.4, ale smoother inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality, flexible hose in color cream, designed specially for industry pharmaceutical, biotechnology and laboratories. has high resistance fatigue, exceptionally high service life in use in pump peristaltic and good resistance to flaking („spallation” - crumbling microparticles material hose in result pressure rotor pump). is characterized also very low permeability for media gas, low level absorption conveyed products, good resistance on acids, bases and oxidation. ideal for use in processes diagnostics, sampling and culture cultures cellular in vitro, generating vaccines, for bioreactors, sterile lines filling, processes fermentation, extraction and purification (purification). opaque wall hose protects sensitive products against radiation UV. hose is compliant with requirements USP CLASS VI and is completely not cytotoxic, not hemolytic and not pyrogenic. compliant with ISO 10993 for contact with blood, fluids body and tissues for 30 dni. Meets the requirements of NSF-51 for contact with food. possible multiple sterilization steam in autoclaves (30 min, 1 bar, 121°C), cleaning CIP and SIP installation, oxide ethylene or radiation (gamma Cobalt 60 for 5 Mrad). resistant to flame (UL 94-HB). length full roll hose 7.5 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: thermoplastic elastomer (TPE). Operating temperature: od -51°C up to +135°C. temperature brittleness: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery, very flexible, resistant to aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (e.g. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants based on glycols. Not is suitable for oils, fuels, hydrocarbons aromatic. It can be used for various paints water-soluble and based on ketones and esters. Not is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (e.g. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) textile braid spiral. Outer layer: black EPDM rubber. Operating temperature: od -40°C up to +120°C (momentarily up to +140°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose brake PTFE with a steel braid OBHN

          All products | Brake hoses and fittings
          0 €
          A hose intended for vehicle brake systems. Made in accordance with the SAE J1401 standard. Intended for conducting pressures in hydraulics, resistant to high temperature and aggressive chemical substances, DOT3 and DOT4 brake fluid. The outer surface is also resistant to the above-mentioned substances. The hose can be used in brake systems equipped with ABS - it reduces the pulsation effect. Inner layer: PTFE. Reinforcement: a single steel braid. Working pressure: 210 bar. Operating temperature: od -40°C up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hydraulic hose A compact EN 857 PROKOMP 2SC

          All products | Hydraulic rubber hoses
          0 €
          A general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 400.000 pulse cycles. standards: EN 857 2SC, SAE 100R16, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light and flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. resistant to action water and oiled air. hose o elevated resistance, acc. to standards DIN 73378 (P-plasticised, H-stable thermally, L-resistant to action radii UV). standards and requirements: compliant with standards DIN 74324, concerning pneumatic systems brake vehicles road and with DIN 73378, concerning hoses polyamide used in vehicles road. When working at an elevated temperature, the pressure drop with temperature must be taken into account. Available in colours: natural, black, blue, green, red and yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 12 bar to 44 bar (depending on the diameter and wall thickness wall hose). working pressure depends on temperature. Operating temperature: od -40°C up to +80°C (for media based on water +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic spiral polyamide AC E

          All products | Pneumatic hoses
          0 €
          Spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides section simple o length 100 mm and fitting with thread external BSPT. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose polyamide PUSH-IN for products lubricating TB 66

          All products | Grease hoses and hose-end fittings
          0 €
          Hose PUSH-IN for products lubricating o calibrated diameter outer intended for connecting of couplings push-in PUSH-IN. Dla temperatures use above +20°C, should reduced maximum pressure working hose in accordance with value coefficient correction: (temperature use/factor correction) +20°C/1.00; +30°C/0.83; +40°C/0.72; +50°C/0.64; +60°C/0.58; +70°C/0.52; +80°C/0.47. Material: polyamide 66. Operating temperature: od 0°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose suction-delivery intended for conveying water industrial, sewage, sludge, liquids non-corrosive etc. light, pliable, resistant to kinking and vacuum. Layer outer resistant to ozone and conditions atmospheric. used commonly for pumps in industry, construction and agriculture. assembly – depending on the diameter and type fittings using straps, clamps, ferrule clamping, bands. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Working pressure: from 5 bar to 10 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose PTFE smooth SMTO

          All products | PTFE hoses
          0 €
          Light, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installation chemicals, paints, fuels, oils, greases, air, gases, water, steam and liquids based on water – we all types industry. as inert chemical and free of components, which could penetrate for medium internal, It can be used for substances food. compliant with FDA 21 CFR 177.1550, EU 10/2011, EC 1935/2004 and Italian D.M. 174 06/04/2004. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. It can be used also as mechanical guiding cables or tie rods Due to low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 3:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: PTFE (teflon). Operating temperature: od -60°C up to +260°C. Working pressure: from 3 bar to 56 bar - depending on the diameter and wall thickness wall hose.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose reinforced PCV/PVC RAGNO CR

          All products | General purpose hoses
          0 €
          Flexible pressure hose, PVC general purpose and for products food. used for compressed air, water, liquids refrigerant based on water, light chemicals and liquid and semi-liquid products food. smooth wall inner reduces losses flow and ensures ease cleaning. W industry food It can be used for conveying food hydrated, acidic, alcohols up to 20% e.g. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C and 0.5 h). Not recommended for milk and dairy products or food substances containing fats and oils. hose RAGNO CR complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 8 bar to 20 bar - depending on the diameter hose. The working pressure value decreases as the temperature rises. Operating temperature: od -5°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN 115 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1000 bar (coupling connected). pressure bursting: 2600 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling for hose with a nut and valve intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. An audible click signals a successful connection. length L - length total. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check RFL L type U (Connection threaded with an O-ring on inlet and coupling push-in at the outlet, for actuator) regulates stream flowing air in one direction. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality two-way ball valve with threads internal BSP and holes mounting in body, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -40°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure valve needle intended for mounting in installation or mounting panel. used mainly in heavy conditions, for sampling samples, cutting flow and for stations for testing. standard with stem type V (work valve close - open). each valve is factory tested. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: BSP female.
        Go to Top