0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting screw-in tee TE-NT, steel stainless

          All products | Tube fittings for hydraulic pipes
          0 €
          Fitting DIN 2353 screw-in tee, type TE-NT: socket 24° DIN 2353 with thread external metric and with thread external NPT (sealing on the thread – PTFE tape or anaerobic sealant). factor safety 2.5:1. occurs as: L (series light), S (series heavy). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting screw-in tee TE-NT, steel carbon

          All products | Tube fittings for hydraulic pipes
          0 €
          Fitting DIN 2353 screw-in tee, type TE-NT: socket 24° DIN 2353 with thread external metric and with thread external NPT (sealing on the thread – PTFE tape or anaerobic sealant). factor safety 2.5:1. occurs as: L (series light), S (series heavy). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting screw-in Walterscheid™ GE-BT, steel carbon

          All products | Tube fittings for hydraulic pipes
          0 €
          Fitting DIN 2353 Eaton Walterscheid™ screw-in, type GE-BT: socket 24° DIN 2353 with thread external metric and with thread external BSPT (sealing on the thread – PTFE tape or anaerobic sealant). factor safety 2.5:1. occurs as: LL (series very light), L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting screw-in Walterscheid™ GE-NT, steel carbon

          All products | Tube fittings for hydraulic pipes
          0 €
          Fitting DIN 2353 Eaton Walterscheid™ screw-in, type GE-NT: socket 24° DIN 2353 with thread external metric and with thread external NPT (sealing on the thread – PTFE tape or anaerobic sealant). factor safety 2.5:1. occurs as: LL (series very light), L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting screw-in Walterscheid™ GE-UN, steel carbon

          All products | Tube fittings for hydraulic pipes
          0 €
          Fitting DIN 2353 Eaton Walterscheid™ screw-in, type GE-UN: socket 24° DIN 2353 with thread external metric and with thread external UNF (sealing an O-ring). Safety factor 4:1. occurs as: L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting screw-in Walterscheid™ RI-BE, steel carbon

          All products | Tube fittings for hydraulic pipes
          0 €
          Fitting DIN 2353 Eaton Walterscheid™ screw-in, type RI-BE with thread external BSP (sealing DIN 3852 type E – gasket elastomer o cross-section rectangular) and with thread internal BSP (sealing on the thread). occurs as: L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting push-in with a lock nut SKV with a male BSP thread (sealing DIN 3852 type E - gasket elastomer o cross-section rectangular) for use in systems hydraulic. Material: steel galvanized. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Small, light and handy tool for microperforation outer layer hoses o diameter for 2". allows making microperforation in very fast way especially in situation when we have limited access for hose. ideal tool for hoses thermoplastic. dimensions: 260x45x30 mm. weight 0.6 kg.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Brass reducer (reducer, ring, A nut) for use with connector or fittings type AI 13000 (range diameters external joined pipes od 4 for 12 mm). tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer pressure-gauge nipple, steel stainless, type RDN

          All products | Manometers reducers and valves
          0 €
          Nipple with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o greater size. pressure gauge mounted for thread internal d1. connection to has character self-sealing – cone on bottom hole d1 presses in hole plug centring the connection pressure gauge. threads d1 and d2 are protected against unscrewing connections through applied special adhesive. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: steel AISI 316Ti.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling reducing with thread external BSP and thread internal BSP intended for cold and hot water. Material: brass chrome-plated. Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Reducer for quick couplings for water NiTO with threads external. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Reducer for quick couplings for water NiTO with thread external and thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Regulator pressure air with factory set value pressure output 6 bar (set pressure not can change). Do screwing in directly for tools pneumatic. Regulator pressure increases safety use: protects the operator and tools use, avoiding strokes pressure; ensures optimal flow capacity tools pneumatic through supply constant, pre set pressure; limits excessive wear compressed air. light, A compact size and compatible of all available tools pneumatic. minimal Working pressure: 8 bar. maximum Working pressure: 16 bar. Material: aluminum. weight: 41 g.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Regulator compressed air panel, type 367

          Air preparation elements (FRL) | All products
          0 €
          A diaphragm-type reducing valve with a pressure gauge built into the knob, ideal for panel mounting. It has an air bleed to the atmosphere. High accuracy in maintaining the output pressure. Panel mounting element are available (EW-367K33). Material: alloy zinc and aluminum. Size: 3/8”. Supply pressure: up to 25 bar. Operating temperature: od -10°C up to +90°C. Connection: 3/8" BSP female. Flow rate 1000 l/min (at an inlet pressure of 8 bar and Dp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A monoblock Directional valve spool YFM120 Controlled levers manual of centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural, etc. standard equipped in valve safety (set factory on 180 bar) and spools type 1. Material: cast iron (body), hardened steel (spools). sealing: NBR. maximum Working pressure: 250 bar. maximum pressure return: 50 bar. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A monoblock spool directional valve YE45, electrically controlled, with centering springs. intended for systems hydraulic cranes, lifts, machine construction, agricultural, etc. standard equipped in valve safety type C (set factory on 140 bar) and spools type 1. Material: cast iron (body), steel hardened (spools). sealing: NBR. maximum Working pressure: 250 bar. maximum pressure return: 25 bar. Voltage control: 12V DC. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Directional valve air angled 5xGW BSP with a bracket, brass, type EW

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Directional valve angled with threads internal BSP with a bracket for distribution air. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Directional valve air straight 5xGW BSP with a bracket, brass, type EW

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Directional valve straight with threads internal BSP with a bracket for distribution air. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve air EWO allows placement in installation two or three valves shut-off, which can be closed individually, accordingly for needs. has two valves shut-off and two outlet with thread external equipped in fittings for hoses 6 mm or 9 mm. position mounting - any. Body material: brass. Operating temperature: od -10°C up to +90°C. Working pressure: 40 bar.
        • Placeholder
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve air EWO allows placement in installation two or three valves shut-off, which can be closed individually, accordingly for needs. has two valves shut-off and two outlet with thread external. position mounting - any. Body material: brass. Operating temperature: od -10°C up to +90°C. Working pressure: 40 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wipes industrial IMW

          All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings
          0 €
          Wipes industrial IMW effectively remove dirt, oil, grease and tar. ideal for cleaning hands, tables working, tools etc. Packaging - tube 40 pcs
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator double-acting operation with magnet and cushioning ISO 15552 series 3. has special sleeve o reduced for minimum weight, made with aluminum anodized, calibrated, and two grooves for mounting sensors on common plane with ports supply. other wall are smooth and easy in cleaning. cover actuator made with high-pressure casting aluminum. Piston diameter: Ø 32 ÷ 100 mm. stroke working: od 50 for 800 mm. Working pressure: od 0.4 up to 10 bar. sealing: NBR, polyurethane. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator A compact series CMPC, with piston rod with thread internal, features small weight and short installation, co allows ich assembly in hard reachable places. special profile actuator connected is with covers external using bolts, a to ensures optimal its rigidity axial and increases variety ways its mounting. depending on version equipped is or not in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows on easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation of hidden piston rod. Material piston rod: steel C45 chrome-plated or steel stainless. maximum Working pressure: up to 10 bar. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator single-acting operation ISO 15552 type A, has cover made with high-pressure casting aluminum and profile made with aluminum anodized, calibrated, which contains on three walls longitudinal grooves enabling direct assembly and protection sensors position piston. Te same grooves serve for direct mounting valves and other mechanical parts. Piston diameter: Ø 32 ÷ 63 mm. stroke working: od 30 for 200 mm. Working pressure: od 0.4 up to 10 bar. sealing: polyurethane. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator short-stroke double-acting operation, with protection against rotation with magnet. series SSCY is characterized compact design and Intended is for mounting in confined spaces. service life working actuators without loads transverse with seals with NBR is 15 million cycles, with seals polyurethane 30 million cycles. Z notes on variability many agents having influence on service life, The presented value not should be treated as binding or guaranteed, a only as reference. available diameter piston: Ø 12 ÷ 80 mm. stroke working: od 10 for 80 mm. Material seal actuator: NBR, polyurethane. Working pressure: od 0.4 up to 10 bar - depending on the diameter piston. Operating temperature: od -10°C up to +80°C - depending on kinds seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator A compact series CMPC, with piston rod with thread external, features small weight and short installation, co allows ich assembly in hard reachable places. special profile actuator connected is with covers external using bolts, a to ensures optimal its rigidity axial and increases variety ways its mounting. depending on version equipped is or not in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard NFE 49-004-1 and 2 (UNITOP). standard ta allows on easy and fast selection and replacement actuator during work repair machine. selected actuator have through-flow hole in piston rod. Piston diameter: Ø 32 ÷ Ø 100. type actuator: single-acting and double-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal Working pressure: 0.4 ÷ 0.6 bar, depending on the diameter. maximum Working pressure: up to 10 bar. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Actuator with double piston rod series TWNC

          All products | Pneumatic actuators
          0 €
          Actuator double-acting operation with passing double piston rod It can be used as element actuating in systems, in which required is protection against rotation. W the scope dimensions axial compliant with the standard ISO 15552. standard configuration with magnet and cushioning. Piston diameter: Ø 32, 40, 50, 63, 80, 100 mm. Maximum, recommended length stroke: od 25 for 500 mm. Working pressure: up to 10 bar. sealing: polyurethane. medium working: filtered compressed air, oiled or non-oiled. force produced at 6 bar extension/return: Ø 32 - 434/350 N, Ø 40 - 678/597 N, Ø 50 - 1060/940 N, Ø 63 - 1683/1471 N, Ø 80 - 2714/2295 N, Ø 100 - 4241/3812 N. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease PENETRATOR 5 WAY PLUS

          All products | Oils and greases
          0 €
          Excellent grease for precision equipment. ensures very good penetration, lubrication, demoisturising, protection against corrosion. used for: removing moisture and drying equipment electric, unscrewing rusted bolts, nuts, removing fine contaminants with metal parts. Not contains silicones. Packaging - 500 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease silicone silicone SPRAY

          All products | Oils and greases
          0 €
          Grease silicone silicone SPRAY not contains substances petroleum-based and is resistant to elevated temperatures up to +176°C. secures element, not leaves stains. Packaging - 400 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease A universal US-45

          All products | Oils and greases
          0 €
          Oil A universal US-45 penetrating and lubricating, in spray o capacity 500 ml. It can be used as multifunction product o properties lubricating, rust-removing, moisture-repellent and securing (for all kinds machine and equipment). cleans, secures and lubricates all types metals and is safe for greater surface rubber and with plastics. fast rust remover – ideal at removal corroded bolts, nuts, pins, etc. is strongly penetrating agent, leaving po use thin lubricating coating. product ten secures lines, linkages, assemblies brake, gears, locks, tools, etc. US-45 to product lubricating o very low viscosity, invaluable at penetration and lubrication hard reachable places. has excellent properties moisture-repellent, is safe in use on batteries, starters, lines ignition. restores contact electric tarnished contacts. allows avoid problems with starting and eliminates leakage stream in installations automotive. product cleans and secures matte surfaces metals. removes dirt, soot, greases, tar, etc. US-45 not contains silicones ani resins and not builds up at repeated use. secures against rust and verdigris, protects against moisture. is gentle for rubber and plastics. safe at use on batteries, starters, lines ignition. Operating temperature: od -25°C up to +50°C. Packaging - 500 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease nipple for socket NORDIC RANGE

          All products | Hydraulic quick couplings
          0 €
          Grease nipple (plug lubricator) compatible for socket NORDIC RANGE of size 1/2", 3/4" or 1". equipped is in grease nipple, through which should feed grease in purposes maintenance. prevents corrosion mechanism locking in the socket (sleeve locking, spring, balls). allows operation in conditions strong contamination and winter, prevents freezing quick coupling.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease nipple compressed air LUB, series SYNTESI®

          Air preparation elements (FRL) | All products
          0 €
          Grease nipple pneumatic to straight and most widely used solution, ensuring correct lubrication mist oil, devices actuating in installations pneumatic. process suction oil takes place due to a drop pressure generated in venturi Venturi. amount drops oil introduced for stream air is dosed through needle adjustment. On rear and front surface lubricator is found the connection auxiliary for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. capacity bowl: 60 cm³ - SY1, 130 cm³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease nipple compressed air, size DN6

          Air preparation elements (FRL) | All products
          0 €
          Grease nipple compressed air with polycarbonate tank, ensures correctness lubrication mist oil equipment in installations pneumatic. Size: DN6. assembly: vertical. Material housing: brass. sealing: NBR. capacity bowl: 40 cm 3. Supply pressure: up to 16 bar. Operating temperature: od -10°C up to +50°C. Connection: 1/4" BSP female. Flow rate: 1160 l/min (at an inlet pressure of 6 bar Δp = 1 bar). weight: 400 g.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt BANJO DIN 7643

          All products | Hose fittings for measuring hoses
          0 €
          Bolt BANJO DIN 7643, size M8, M10 and 1/8" BSP. Material: steel carbon, galvanized. Material: steel with coating zinc-nickel. Working pressure: 200 bar. Operating temperature: od -30°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Bolt BANJO with an O-ring and thread internal type D9 for coupling type R28, R29. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt for BANJO inch, steel AISI 316L

          All products | Fittings for high-pressure hoses
          0 €
          Bolt without washer for fittings BANJO type - Z, inch. Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Double bolt for BANJO with bleed, steel carbon

          All products | Brake hoses and fittings
          0 €
          Bolt double for coupling BANJO with bleed, Intended for fastening lines brake. Material: carbon steel, chrome-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Double bolt for BANJO, aluminum

          All products | Brake hoses and fittings
          0 €
          A double bolt for a BANJO connector, intended for fastening brake lines. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Double bolt for BANJO, steel carbon

          All products | Brake hoses and fittings
          0 €
          A double bolt for a BANJO connector, intended for fastening brake lines. Material: carbon steel, chrome-plated.
        Go to Top