Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping pliers PWZ intended for crimping textile-reinforced hoses with type EC sheet-metal ferrules. enable crimping in hard reachable places. W set is found three sets jaws. Working range (inner hose diameter) approx. 5 ÷ 10 mm. weight: 3.5 kg.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDisc cutting standard (smooth) made with hardened steel, for use in equipment for cutting hoses hydraulic. range diameters: 200 ÷ 520 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStem type FSI used for skiving internal layer rubber hoses hydraulic machinable. standard supplied with a knife cutting, a ring for regulation length skiving and screws securing. Compatible with handle tools devices FINN POWER FS50. Diameter stem: od 1/2" for 2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStem type FSE used for skiving outer layer rubber hoses hydraulic machinable. Compatible with handle tools devices FINN POWER FS50. W sizes: od 3/16" for 2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle knife for tools EST-L intended for skiving outer layer rubber hoses hydraulic demanding larger length skiving. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight device for cleaning hoses and pipes compressed air. has two nozzles with plastic, one for hoses 3/16" ÷ 1" and the other for hoses 1" ÷ 2". pressing hose for nozzle opens valve air enabling cleaning hose. pressure air: min. 6 bar. Connection installation pneumatic: 1/2" BSP female.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for filling oil and suction and filtering oil of tanks presses, machine and systems hydraulic. parameters: drive electric 0.55kW, 400V; Pump 39 l/min; Filter 25 µm (available also 10 and 20 µm); Filter suction 125 µm. weight: 60 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for filling oil and suction and filtering oil of tanks presses, machine and systems hydraulic. parameters: drive electric 400V, 0.55kW; Pump 39 l/min; Filter 25 µm (available also 10 and 20 µm); Filter suction 125 µm; electronic counter flow oil; electronic indicator replacement filter. weight: 87 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing bolts against loosening. is characterized medium viscosity and medium strength. has certificate KTW - approval for installation water potable. possible disassembly at use standard tools. maximum size thread: M 36. Operating temperature: -60°C up to +150°C. Packaging of the "pen" type with a capacity of: 20 and 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing bolts against loosening and for locking pins. is characterized medium viscosity and very high strength. hard removable. maximum size thread: M20. Operating temperature: -60°C up to +150°C. Packaging of the "tube" type with a capacity of: 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic thread sealant, for materials passive without activator. Sealing of hydraulic and pneumatic systems. elevated viscosity, high strength – disassembly possible. Gap maximum 0.20 mm. color: green. Operating temperature: od -60°C up to +180°C. Packaging of the "pen" type with a capacity of: 20 and 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant thermally sealant in the molds semi-liquid paste binding for state non-sticky within 10 ÷ 15 minutes, a completely within 18 hours. supplied in tubes 310 ml for a dispenser. should go Use in well ventilated rooms and avoid contact with gasoline czy oil drive. Material: blend amorphous silica, polydimethylsiloxane (type silicone), oxide iron and catalyst. Operating temperature: od -59°C up to +287°C (momentarily up to +538°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled A guard insulating Intended for cooling lines electric in systems automatic welding. resistance electrical 1x10 8 Ω/m. Material layer internal: black rubber SBR/NR. Material layer outer: black rubber SBR/NR. Reinforcement: textile braid. Working pressure: 10 bar. Operating temperature: od -30°C up to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press UPS Intended is for crimping using lever manual, hoses o reinforcement textile ferrules sheet-metal type EC. standard equipped is in two sets (po 6 segments clamping) jaws. range use o diameter internal crimped hoses for press UPS-1: DN 3 ÷ 8 (range diameters internal ferrules EC: 8 ÷ 17 mm), DN 10 ÷ 16 (range diameters internal ferrules EC: 18 ÷ 28 mm). range use o diameter internal crimped hoses for press UPS-2: DN 20 (range diameters internal ferrules EC: 30 ÷ 34 mm), DN 25 (range diameters internal ferrules EC: 32 ÷ 38 mm). Do press exists possibility purchase base o index EC-100250.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEffective valve closing compatible of all installations pneumatic o standard wear compressed air, which task is protection the operator and installation pneumatic in case jej damage (e.g. rupture tubes or bursting hose). Meets the requirements of: EN 983 § 5.3.4.3.2, EN 4414 §5.4.5.11.1, ATEX Group II Category II, TÜV 01-02-0145, TÜV AZ 77318 2. valve should select taking into account: value flow, length and diameter hose, a also diameter internal element installation. W case questions or doubts please o contact with Tubes International. Connection: BSP male or BSP female (inlet) / BSP female (outlet). Material body: aluminum. Material piston: POM (1/4" ÷ 1/2"), aluminum (3/4"). Material spring: steel stainless. sealing: NBR. minimal pressure: 4 bar. Working pressure: 18 bar. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStopper electric for press P20 MSN is one with option control press crimp. crimping has space po pressing line with fitting for alloy placed za head press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet nozzles (suction) for gun suction (slot long and wide). Material: plastic plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet high-strength wrenches socket 1/2" o sizes 17, 19 and 21 mm, coated plastic artificial. available in various colors, in order to facilitating identification size. whole closed in convenient plastic box. compatible with a wrench pneumatic EW-741160.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling for use with greater tools pneumatic. possibility turn o 360° effectively prevents twisting connected line (stays correct Flow rate air) and allows on free operation with connection a tool pneumatic. maximum Working pressure: 10 bar. Material: aluminum. weight: 78 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA reel of carbon steel painted powder intended for industry food, chemical, plants production, workshops repair, etc. has unique mechanism spring EZ-Coil®, which allows wind automatically hose in time up to 80% slower than traditional systems spring. System ten increases safety use the operator, extends service life drum, coupling swivel and hose. A reel equipped is in hose MP20 intended for conveying air, water and light chemicals, paints polyurethane, epoxy and based on solvents water, terminated fitting with male thread 3/8" BSP (sealing butt). mounted stopper prevents retraction hose. Material drum: steel carbon (color blue). Material coupling swivel: brass. fittings, adapters and ferrules: steel carbon. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA reel of carbon steel painted powder intended for industry chemical, plants production, workshops repair, etc. has unique mechanism spring EZ-Coil®, which allows wind automatically hose up to 80% slower than traditional systems spring. System ten increases safety use the operator, extends service life drum, coupling swivel and hose. A reel equipped is in hose TUBES 2116 T o diameter internal 13 mm, for conveying air and water, terminated fitting with male thread 1/2" BSP. mounted stopper prevents retraction hose. Material drum: steel carbon. Material coupling swivel: brass. fittings, adapters and ferrules: steel carbon. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact valve regulating maximum Flow rate compressed air for use for e.g. tools pneumatic. knob allows easy adjustment flow. maximum Working pressure: 15 bar. Material: aluminum. weight: 18 g.
