Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction – delivery hose, PVC intended for water and sewage. smooth wall inner, externally lightly Serrated. good resistance to external impacts and heavier conditions use. flexible in low temperatures. used in systems irrigation, tankers and vehicles sewage, for purification sewers and emptying septic tanks. Hose material: green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying water industrial, sewage, sludge, liquids non-corrosive etc. light, pliable, resistant to kinking and vacuum. Layer outer resistant to ozone and conditions atmospheric. used commonly for pumps in industry, construction and agriculture. assembly – depending on the diameter and type fittings using straps, clamps, ferrule clamping, bands. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Working pressure: from 5 bar to 10 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, lighter od rubber, hose suction-delivery intended for conveying water, sewage, sludge and dry bulk materials. used for systems irrigation, loading and unloading tankers, in installations industrial, etc. retains high flexibility at sub-zero temperatures ambient. smooth inner and outer wall facilitates maintaining hose in purity and increases flow capacity unloading o 20%. is resistant to conditions atmospheric and abrasion. hose Available also in straight, not bent in coil sections 3 for 6 m. Inner layer: black PVC. Reinforcement: a polyester braid, galvanised steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose of reinforcement spiral steel, intended for hot water mixed with fluids anti-freeze. used for systems cooling and heating, for pumps in engines and machines. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. blend rubber compliant with the standard DIN 73411:79. Inner layer: black EPDM rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 4 bar. Operating temperature: od -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized hose suction-delivery for water and sewage in installations sanitary on ships, boats motor, yachts, etc. hose odorless and impermeable odors of drainage sewage on outside (5-year warranty). Layer outer resistant to factors marine and conditions atmospheric. has resistance to vacuum. compliant with the standard EN ISO 8099. On special order Available version SANITARY STAR / 7 o pressure working 7 bar. length standard: 60 m or 120 m. Inner layer: white synthetic rubber. Reinforcement: braid synthetic, steel spiral. Outer layer: white synthetic rubber. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, strong hose suction - delivery intended for water, sewage. externally Serrated, inside almost smooth. good resistance to external impacts and heavier conditions use. retains high flexibility in sub-zero temperatures. used in systems irrigation, water installations industrial, for emptying septic tanks etc. On special order Available also version ARIZONA EXTREME ELASTIC flexible in very low temperatures (for -40°C). Hose material: grey and green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.5 bar to 7 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to vacuum hose suction-delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. length standard: 60 m or 120 m. Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: EPDM rubber / fiber glass. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C, outer up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternally Serrated flexible and strong hose suction - delivery for water and sewage. is characterized good resistance on impacts external and heavy conditions use and resistance on radiation UV and low temperatures. used for in systems irrigation, tankers, for rinsing sewers and emptying septic tanks. used also in installations industrial. Hose material: grey-violet PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the diameter hose and temperatures. Operating temperature: od -20°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable, light and strong hose suction-delivery intended for conveying water, sewage, sludge, liquids non-corrosive, fertilisers natural (slurry). Layer inner with smooth rubber synthetic, resistant to sludge and sewage. corrugated Layer outer ensures small radius bends and is resistant to ozone, conditions atmospheric and aging. intended for applications agricultural, construction and industrial, used for emptying septic tanks, as hose suction for pumps water and sewage, for dewatering and irrigation, for tankers. can be used for extraction air, dust and for bulk materials. assembly – depending on the diameter and type fittings using bands steel, straps, clamps or ferrule clamping. Inner layer: black synthetic rubber (SBR). Reinforcement: cord synthetic, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is commonly used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for systems exhaust cooled water engines diesel boats motor and yachts (free discharge mixed exhaust gases and water cooling). used in short sections between pipes installation. Layer inner resistant to exhaust gases. Layer outer resistant to fire and conditions atmospheric. has resistance to vacuum. compliant with certificate type Lloyds 99/00169 (E4), approved VTT in accordance with Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black, corrugated synthetic rubber CR. pressure bursting: ≥ 2 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinking hose suction - delivery o black serrated layer outer, designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. Dla diameter 90 mm Available in sections 2 m with soft, free of spiral ends. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRectangularly Serrated hose reinforced spiral steel, for hot water and liquids anti-freeze, intended for automotive and industrial systems cooling. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to overheating, oil and aging. Inner layer: black rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: up to 4 bar. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 5182 l/h. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinking hose suction - delivery designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x140 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to oils, greases and hot chips hose intended for low-pressure feeding liquid or gas coolant at treatment metals. has tzw. memory shape, co allows on precision directing a stream substances cooling. supplied in the molds ready lines with connection with thread external BSP ending metric thread external. Material: black PVC. Reinforcement: steel A guard leading, Diameter DN 10 has additional spiral cover with nickel-plated sheet steel. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with base magnetic and valve for supply coolant - system 1/4". parts components: 20 segments (L=300 mm), nozzle flat 1", valve with thread external 1/4" BSPT and base magnetic with "tail" for hose 1/4" (size thread fittings 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x15 cm or 100 cm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 1900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, o various lengths, with mounted fitting, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. available length: od 10 m for 25 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, with mounted fitting, a clamp and a cable, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. short sections hose o length 1 m with fitting used are as hoses cover, rested on edge hole channel, inside which introduced is for channel pressure hose cleaning or line inspection with camera. mounted on the tip clamp with attached a cable o length 7.5 m allows on maintaining appropriate position hose cover. length: 1 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar. Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread internal NPT in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread internal NPT in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread internal NPT in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/2" LOC-LINE® made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. available length: 400 mm, 500 mm and 600 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 1/4" LOC-LINE® made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. available length: 400 mm, 500 mm and 600 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with thread external NPT in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil line for coolant made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. Available in four sizes (Diameter bore 1/4", 3/8", 1/2" and 3/4"). Available length: 15 m. Material: acetal. Working pressure: up to 3 bar, depending on the diameter. maximum Flow rate: 1700 l/h, depending on the diameter. Operating temperature: up to +65°C.
