Hose suction-delivery intended for conveying water industrial, sewage, sludge, liquids non-corrosive etc. light, pliable, resistant to kinking and vacuum. Layer outer resistant to ozone and conditions atmospheric. used commonly for pumps in industry, construction and agriculture. assembly – depending on the diameter and type fittings using straps, clamps, ferrule clamping, bands. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Working pressure: from 5 bar to 10 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +70°C.

Widely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric and abrasion. Not is resistant to oil, not recommended also for air with mist oil. W comparison with a hose "Tubes 2116" has thicker wall. Inner layer: white EPDM rubber. Reinforcement: a polyester braid. Outer layer: red or blue EPDM rubber micro-perforated. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.

Strong hose delivery intended for conveying water or compressed air in systems irrigation, agriculture, mines, on squares construction etc. Layer inner smooth, co ensures minimal losses flow. Layer outer lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant to abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. Not requires washing and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). use for air should be always preceded analysis risk in case accidental disconnection or bursting hose. Hose material: black blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: from 10 bar to 25 bar (water), from 7 bar to 18 bar (air) - depending on the diameter hose. temperature use for water: od -20°C up to +80°C, momentarily up to +100°C.

Exceptionally flexible hose intended for compressed air. Due to such features as: lightness, flexibility in low temperatures, resistance to elongation is especially recommended for tools pneumatic, compressors, hose reels drum, etc. Inner layer: black PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. temperatures use: od -20°C up to +60°C.

Hose of reinforcement spiral steel, intended for hot water mixed with fluids anti-freeze. used for systems cooling and heating, for pumps in engines and machines. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. blend rubber compliant with the standard DIN 73411:79. Inner layer: black EPDM rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 4 bar. Operating temperature: od -40°C up to +120°C.

Very light economical hose, flat at rest, intended for conveying water. economical solution for low pressures working and not requiring conditions use. used in agriculture e.g. for irrigation crops, construction and in other fields industry. Hose material: blue PVC. Reinforcement: spacer polyester. Working pressure: 3 bar. Operating temperature: od -5°C up to +60°C.

Hose delivery intended for conveying compressed air, for compressors, hammers, drills and other tools pneumatic. thanks to low weight, flexibility, strong construction and high pressure working accepted and with success used od many lat in construction (in particular in companies occupying demolition), industry and mining. extremely strength and durable thanks to high quality materials and the structure. Reinforcement with circumferentially woven braid polyester completely bonded and surrounded rubber in original process production extrusion blend rubber on hot through braid. resistant to radiation UV. Layer inner smooth, co ensures minimal losses flow. yellow, grooved surface outer is resistant abrasion, oils and ozone and perfectly visible on square construction. flat at rest, co facilitates operation and storage. resistant to loads longitudinal. used most often of couplings claw for air (spacing 42 or 41 mm) mounted clamps cast iron (ordered separately). Available also in color black. use for air under high pressure should be always preceded analysis risk in situation accidental disconnection or bursting hose and possible use protections. maximum pressure working fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. length standard roll: 200 m. Hose material: yellow blend NBR/PVC with barrier resistant on UV, pressed in a polyester braid in process extrusion hose. Working pressure: from 12.5 bar to 25 bar - depending on the diameter hose and temperatures. Operating temperature: od -30°C up to +75°C (momentarily up to +80°C).

Resistant to vacuum hose suction-delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. length standard: 60 m or 120 m. Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: EPDM rubber / fiber glass. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C, outer up to +530°C.

Externally Serrated flexible and strong hose suction - delivery for water and sewage. is characterized good resistance on impacts external and heavy conditions use and resistance on radiation UV and low temperatures. used for in systems irrigation, tankers, for rinsing sewers and emptying septic tanks. used also in installations industrial. Hose material: grey-violet PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the diameter hose and temperatures. Operating temperature: od -20°C up to +50°C.

Flexible hose suction intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is commonly used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.

Flexible hose delivery for water common use manufactured we France. multilayer in The design and strong, woven braid ensures high flexibility and no screwing facilitating hand operating a hose. very good resistance to repeated bending, crushing and stretching. low deformation under pressure. smooth Layer inner ensures good Flow rate. Layer outer resistant to abrasion, aging and radiation UV. Due to its construction especially recommended for systems irrigation in agriculture, horticulture and in construction and road engineering. Inner layer: two-layer, black PVC. Reinforcement: strong woven a polyester braid. Outer layer: two-layer yellow PVC. Working pressure: from 8 bar to 10 bar - depending on the diameter hose and temperatures. Operating temperature: od -15°C up to +60°C.

Light, very flexible hose suction-delivery intended for systems exhaust cooled water engines diesel boats motor and yachts (free discharge mixed exhaust gases and water cooling). used in short sections between pipes installation. Layer inner resistant to exhaust gases. Layer outer resistant to fire and conditions atmospheric. has resistance to vacuum. compliant with certificate type Lloyds 99/00169 (E4), approved VTT in accordance with Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black, corrugated synthetic rubber CR. pressure bursting: ≥ 2 bar. Operating temperature: od -30°C up to +100°C.

Light, o high durability, A universal hose flat high quality used in industry mining, petroleum, power and agriculture. used in particular for water, sludge, sewage and fertilisers. made with resistant to hydrolysis and microbes polyurethane - polyether. Reinforcement with circumferentially woven braid polyester bonded and surrounded polyurethane in original process production extrusion thermoplastic polyurethane on hot through braid. hose o high strength on force longitudinal, o minimum elongation under pressure (up to 2%) and without tendency for coiling, screwing. thanks to durability connected easily operation (unwinding, laying, storage) Widely used in systems water (dewatering mines opencast, supply in water, drainage and discharge sewage) and not only. resistant to wide range substances chemical, microbes, fungi, hydrolysis, conditions atmospheric, UV and ozone. O sound resistance to abrasion. Available on special order in sections longer than 200 meters in diameters for 6”. in order to confirmation resistance and conditions use hose contact with Tubes International. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting. length standard roll: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 8 bar to 27 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +75°C (water).