Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery intended for conveying liquid products industry petrochemical containing up to 50% hydrocarbons aromatic, fuels, gasoline, oil drive, heating, oils lubricating etc. Layer inner with black, smooth, antistatic (dissipating charges electrical 10 4 Ω 9 Ω) rubber NBR. Reinforcement cord synthetic and spirals steel. Layer outer with black rubber NBR, resistant to oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for conveying fuels or other compatible media in typical conditions use. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: black NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -35°C up to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery RIG STAR D and suction - delivery RIG STAR SD intended is for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). It can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. It has a copper wire ensuring electrical continuity between the hose ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to abrasion, ozone, water sea and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North. can be with success used in use onshore. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: 20 bar. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying fuels and liquid products industry petrochemical, containing up to 50% compounds aromatic, m.in. gasoline, oil drive and oil mineral. It can be used for tankers, tanks, stations loading, equipment industrial. hose Widely used in industry and transport in standard conditions use. Layer inner with smooth, black, antistatic (R 6 Ω/m) rubber NBR. Reinforcement cord synthetic and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – under a condition correct connection for ends. Layer outer with black rubber SBR/NBR, antistatic (R 6 Ω/m), resistant to abrasion, oil, ozone and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR/NBR. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +85°C (for +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and pliable hose suction-delivery intended for conveying liquid products petrochemical containing up to 30% compounds aromatic (except products based on esters). Layer outer flame-retardant, made in accordance with the standard ASTM C 542, resistant to abrasion, oil, ozone and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: cord synthetic, two spirals steel. Outer layer: black rubber CR. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: od -30°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and pliable hose suction - delivery for low-pressure parts installation hydraulics power, based on the requirements of the SAE J517 100 R4 standard. used in particular as hose suction and return oil. intended primarily for liquids hydraulic based on oil mineral and some synthetic liquids hydraulic. can be also used for liquids hydraulic based on water and for water at limiting temperatures up to +70°C. is suitable for conveying many liquid products industry petrochemical o low content compounds aromatic. Not recommended for gasoline, oil drive and oils based on esters phosphate. Layer inner with black, smooth, oil-resistant rubber synthetic. Reinforcement consists of layer cord synthetic and steel spiral ensuring high resistance to vacuum and very good flexible hose without kinking. Layer outer with black rubber synthetic, resistant to abrasion, conditions atmospheric and light oiling. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for unleaded petrol, diesel oil and liquid fuels containing up to 50% aromatic compounds. used in industry and transport for conveying and handling products petrochemical, in road tankers, on road and railway terminals unloading and loading fuels. Layer inner with black, smooth, antistatic (R ≤ 10 6 Ω) rubber NBR (NBR1). Reinforcement layers high-strength cord and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – under a condition correct connection for ends. Layer outer with black, antistatic (R ≤ 10 6 Ω) rubber synthetic, self-extinguishing, resistant to abrasion, oil, ozone and conditions atmospheric. Resistance through the hose wall R ≤ 10 9 Ω (type M/T). compliant with standards EN12115:11 (16 bar), EN 1761(10 bar), ISO 2929 (10 bar), TRbF. Certified for Ex explosion-hazard zones (ATEX). excellent resistance to action products petrochemical, strong The design and properties antistatic both layer internal and outer, built-in cable antistatic, recommend ten hose for demanding applications, also in zones hazard explosion. In every case, however, use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. A version without a wire (type Ω/T) is available on special order.. Inner layer: black, smooth NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +90°C (momentarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and flexible, resistant to abrasion hose suction-delivery intended for pressure conveying oils and fuels. special blend PVC, PU and NBR ensures high resistance to oil drive, biodiesel, and blue oil (fuel used in maritime navigation). Reinforcement spiral with galvanized wire steel, embedded in layer internal, PVC, ensures good resistance to vacuum and kinking hose. smooth Layer inner reduces losses flow. thanks to reinforcement a braid hose has high pressure working and small deformation under pressure. used in distribution, refuelling and handling oils and fuels, e.g. in tankers automotive for refuelling oil heating in domestic systems heating. hoses o diameters 76 ÷ 102 mm have external layer polyurethane (increasing significantly resistance to abrasion) and copper cable antistatic. Inner layer: black PVC / PU / NBR. Reinforcement: steel spiral, a polyester braid. Outer layer: black PVC / PU / NBR (diameter 19 mm ÷ 63 mm); black PU (diameter 76 mm and more). Operating temperature: od -25°C up to +60°C (working pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, suction-delivery hose intended for conveying liquid products industry petrochemical, containing up to 50% compounds aromatic. Layer inner antistatic R 6 Ω. It has a copper wire ensuring electrical continuity between the hose ends and discharge charges electrostatic. excellent for systems transfer and thanks to external corrugation for applications demanding small radius bending. Layer outer resistant to abrasion, oils mineral, ozone, aging, conditions atmospheric and momentary contact with carbon. used for tankers fuel and special cars for cleaning sewers. Inner layer: black NBR rubber. Reinforcement: a synthetic braid, spirals steel. Outer layer: black synthetic rubber. Working pressure: from 10 bar to 16 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C (momentarily up to +120°C depending on kinds medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling hot liquid asphalt, tar, products bituminous. used for loading and unloading tankers road, railway, in plants masses bituminous and in ports. Inner layer: black blend polyacrylic. Reinforcement: cord with wire steel, steel spiral. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -15°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery o extreme flexibility intended for conveying liquid products industry petrochemical, containing up to 60% compounds aromatic. appropriate for use in tankers automotive for transport oil drive, ethanol, gasoline, oils. Layer inner with black, smooth rubber Chemigum ® (NBR, resistance to oil: RMA class A). Reinforcement cord synthetic and two spirals with wire steel. Layer outer, deep corrugated, with black rubber synthetic Chemivic ® (NBR/PVC), resistant to action substances petrochemical, oils and greases and on abrasion. It has a copper wire ensuring electrical continuity between the hose ends – under a condition correct connection for ends. thanks to external corrugation, hose is extremely pliable, a for its bending needed is small force. its minimal radius bends, equal is diameter internal hose. external serrated reduces also resistance pulling hose po ground, a light The design facilitates operating a hose. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: black synthetic rubber Chemivic®. Working pressure: from 10 bar to 17 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose suction-delivery intended for conveying liquid products industry petrochemical. It can be used for oil drive and gasoline. standard version CARACAS recommended is for fuels o content up to 30% hydrocarbons aromatic, whereas version CARACAS 50, at more aggressive fuels (up to 50% compounds aromatic). It has a copper wire ensuring electrical continuity between the hose ends. excellent for systems transfer. Layer outer resistant is on abrasion, oil, ozone and conditions atmospheric, a thanks to corrugation, hose is very pliable and flexible – its minimal radius bends is only 2.5 x Diameter inner. is also light and easy in handling. excellent for systems transfer, tankers fuel in not very heavy external conditions use. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid, spirals steel. Outer layer: black synthetic rubber. Working pressure: 6 bar. Vacuum: 0.6 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, very pliable, hose for conveying gasoline and oil drive, fire-resistant, for small vessels - recreational boats up to 24 m long. hose o pressure working 10 bar, manufactured method mandrel. intended for installation fuel engines stationary on ships, boats motor, yachts etc. Suitable for unleaded petrol, petrol with up to 10% ethanol added (E10 petrol), diesel oil and diesel oil with 10% FAME esters added (B10 – biodiesel). compliant with ISO 7840 type A1 (fireproof, permeability vapours fuels smaller or equal 100 g/m 2 /24 h), compliant with the directive 94/25/EC, certified RINA, compliant with SAE 1527, USCG type A1. Layer inner with black, smooth rubber synthetic, resistant to oils and fuels up to 50% content hydrocarbons aromatic. Reinforcement layers synthetic cord, a for hose POSEIDON LL additional spiral steel. Layer outer with black, self-extinguishing rubber synthetic, resistant oil and conditions atmospheric (resistance to fire: ISO 7840 Annex A: hose filled fuel should withstand flame through 2.5 min). POSEIDON : hose POSEIDON is soft a hose delivery without reinforcement spiral steel. the manufacturer recommended assembly hoses POSEIDON o diameter over 19 mm in installation in sections straight or o gentle (high) radius bends. hose is used in particular in installation filling tanks fuels boats. On special order Available hose POSEIDON o smaller diameters 6, 8.10.13.16 and 19 mm, o pressure working 10 bar. POSEIDON LL : hose POSEIDON LL has additional Reinforcement spiral steel, co ensures resistance to vacuum and kinking. hose is very pliable, its minimal radius bends corresponds only three times diameter internal and can be easily installed in tight spaces compartment engine boats. universal use and high quality hose make, that is on readily and often used through manufacturers greater yachts motor. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic (POSEIDON); cord synthetic, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose suction-delivery made of special, oil-resistant blend PVC. intended for conveying oils mineral and hydrocarbons and water industrial, sewage, liquid fertilisers, some chemicals – in particular tam, where elevated resistance PVC on carbon is required. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). It can be used for some products chemical – diluted acids, bases and alcohols. hose retains its flexibility even in sub-zero temperatures use, a its low weight and small radius bending ensure convenience and ease operation. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. smooth surface inner and outer. resistant to radiation UV, ozone, conditions atmospheric, abrasion. used widely in industry, agriculture, construction and road engineering. as hose reinforced spiral with hard PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above 40°C. Hose material: blue PVC. Reinforcement: spiral with white, hard PVC. Working pressure: from 2 bar to 5 bar - depending on the diameter hose. Operating temperature: od -25°C up to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic and spiral steel. It has copper wires ensuring electrical continuity between the hose ends – under a condition correct connection for ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North, with success used in use onshore. On special order available also versions o higher pressure working (20 / 27 / 30 / 35 bar), with specified force breaking at tension (maximum for 2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and with approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: from 17 bar to 20 bar - depending on the diameter hose. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying fuels aviation (kerosene aviation, kerosene, e.g. Jet A1) and products industry petrochemical containing up to 50% compounds aromatic, mainly for draining fuels of tanks aircraft, loading and unloading airport tankers and dispensers fuels. Layer outer antistatic, resistant to abrasion, oil and conditions atmospheric. has copper cable ensuring continuity electrical (R ‹ 100 Ω) between fitting hose and discharge charges electrostatic. Compliant with the requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong hose suction-delivery for fuels aviation, intended for filling and emptying tanks aircraft, loading and unloading airport tankers and dispensers fuels. as hose without element metal It can be used for direct filling and emptying tanks aircraft. can be wound on drums. appropriate for fuels aviation for engines turbine (kerosene aviation, kerosene, e.g. Jet A1), gasoline aviation and fuels o content hydrocarbons aromatic up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic and spiral with plastic polymer (PET). Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters are available on special order and hoses with fluorescent marking visible in night. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spiral PET. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
