- Home
- Measurement systems and manometers
- Quick-connect measurement fittings
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a shut-off valve quick coupling diagnostic, with thread internal NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable of couplings other manufacturers. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° quick coupling measurement SNAP-CHECK production Swedish intended for measuring pressure in systems hydraulics power. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug possible is under pressure up to 300 bar. pressure working for disconnected with socket plug is 600 bar, a minimal pressure bursting 2400 bar. pressure working for connected socket and plug is also 600 bar, whereas minimal pressure bursting to 1300 bar. precision made quick couplings, ensures tightness and reliability points measurement the system hydraulic. range connections for plugs measurement allows easy configuration connections. socket quick couplings, supplied are standard in set with red caps with plastic. Working pressure: 600 bar. pressure switching: up to 300 bar. Material body: steel galvanized. sealing: NBR. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling measurement SNAP-CHECK production Swedish intended for measuring pressure in systems hydraulics power. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug possible is under pressure up to 300 bar. pressure working for disconnected with socket plug is 600 bar, a minimal pressure bursting 2400 bar. pressure working for connected socket and plug is also 600 bar, whereas minimal pressure bursting to 1300 bar. precision made quick couplings, ensures tightness and reliability points measurement the system hydraulic. range connections for plugs measurement allows easy configuration connections. socket quick couplings, supplied are standard in set with red caps with plastic. Working pressure: 600 bar. pressure switching: up to 300 bar. Material body: steel galvanized. sealing: NBR. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a shut-off valve quick coupling diagnostic, with thread external NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable of couplings other manufacturers. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling measurement SNAP-CHECK production Swedish intended for measuring pressure in systems hydraulics power. socket quick coupling connected are line with pressure gauge, a plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic and equipped in valves shut-off. connection socket with a plug possible is under pressure up to 300 bar. pressure working for disconnected with socket plug is 600 bar, a minimal pressure bursting 2400 bar. pressure working for connected socket and plug is also 600 bar, whereas minimal pressure bursting to 1300 bar. precision made quick couplings, ensures tightness and reliability points measurement the system hydraulic. range connections for plugs measurement allows easy configuration connections. plugs quick couplings, supplied are standard in set with red caps with plastic. Working pressure: 600 bar. pressure switching: up to 300 bar. Material body: steel galvanized. sealing: NBR. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with a shut-off valve quick coupling diagnostic, with thread internal NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable are of couplings other manufacturers. plugs quick coupling with hardened steel, standard mounted are on fixed in system hydraulic, a socket quick coupling remain connected line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. pressure working for disconnected with socket plug is 400 bar a minimal pressure bursting 1600 bar. pressure working for connected socket and plug, is also 400 bar, whereas minimal pressure bursting to 1300 bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with a shut-off valve quick coupling diagnostic, with thread external NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable are of couplings other manufacturers. plugs quick coupling with hardened steel, standard mounted are on fixed in system hydraulic, a socket quick coupling remain connected line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. pressure working for disconnected with socket plug is 400 bar a minimal pressure bursting 1600 bar. pressure working for connected socket and plug, is also 400 bar, whereas minimal pressure bursting to 1300 bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap PD, standard ISO 15171-1. Material: NBR.



















