A compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: inch LET-LOK®.

A compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: metric LET-LOK®.

Three-piece medium-pressure ball valve intended for demanding applications and for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). lever valve with a lock standard in color yellow, available Levers o shape oval. Body material: AISI 316 steel (ASTM A351 CF8M, cast). Material Connections: steel AISI 316 (ASTM A351 CF3M, cast). Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: PTFE (standard); available versions with other material seals o higher parameters (modified PTFE, PTFE with powder steel stainless, UHMWPE, PEEK). sealing stem: MG1241 (PTFE with fiber glass and graphite) / PTFE (standard). pressure working (dependent od temperatures / material seal - see chart): up to 103 bar (PTFE). Temp. use (dependent od material seal - see chart): up to +186°C (PTFE). Connection: BSPT female. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation.

Three-piece medium-pressure ball valve intended for demanding applications and for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). lever valve with a lock standard in color yellow, available Levers o shape oval. Body material: AISI 316 steel (ASTM A351 CF8M, cast). Material Connections: steel AISI 316 (ASTM A351 CF3M, cast). Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: PTFE (standard); available versions with other material seals o higher parameters (modified PTFE, PTFE with powder steel stainless, UHMWPE, PEEK). sealing stem: MG1241 (PTFE with fiber glass and graphite) / PTFE (standard). pressure working (dependent od temperatures / material seal - see chart): up to 103 bar (PTFE). temperature use (dependent od material seal - see chart): up to +186°C (PTFE). Connection: metric LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation.

High quality high-pressure ball valve two-way closing intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: metric LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.

High quality high-pressure ball valve three-way switching with lower inlet (only switching, without cut-off) intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing, high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: metric LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.