- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp tubular type UNI-GRIP S Intended for connecting and repairs pipes with metal (connection axially fixed, with metal resilient rings driving in surface tubes and gasket rubber). Application: water, fluids based on water, sewage, light chemicals, air. version material: steel AISI 316Ti (housing, screws - Class A4-80, solid pins). sealing: EPDM rubber. Operating temperature: od -30°C up to +125°C. pressure nominal: PN 16 (Class pressure working for applications in industry shipbuilding, marine; Safety factor 4:1, assuming positive result single-use testing pressure four times greater, ale po which A clamp not can be used again). maximum Working pressure: up to 70 bar, depending on the diameter clamp (for remaining applications industrial and conditions static, factor safety 1.5:1, assuming positive result testing pressure 150% maximum pressure working, po which A clamp can be further repeatedly used). value pressures working apply for mounting clamps on round tubes steel o minimum wall thickness wall, mounting in accordance with instructions and tightening a wrench torque given on a clamp torque). Available version with incomplete pins, version "L" (example index: UN-GRIP-L-...).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard socket quick coupling AKBO DN 11.8 protecting against accidental damage. color: blue. Material: polyamide.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard GPVC Intended is for protection single hoses or bundles lines hydraulic and pneumatic. protects hose and secures the operator against spray oil in case rupture hose. Material: PVC. Operating temperature: +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 standard complete type 100/101. Dla group dimension 0 occurs one hole under bolt. Dla group dimension 1 ÷ 6 available two holes under bolt. Material: steel carbon or steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: threaded BSP. direction revolutions: right. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTubes seamless for applications pressure made in accordance with the standard EN 10216-5 for pipes made of steel stainless. With an EN 10204 3.1 material certificate. used commonly in industry in construction installation and pipelines. Material: steel AISI 321 (1.4541), AISI 316Ti (1.4571). length standard tubes (one section): 6 m. shipping in sections: 1 m or 2 m, longer sections po agreement costs transport.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsActuator A compact series CMPC, with piston rod with thread external, features small weight and short installation, co allows ich assembly in hard reachable places. special profile actuator connected is with covers external using bolts, a to ensures optimal its rigidity axial and increases variety ways its mounting. W equipped is in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows on easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal Working pressure: 0.4 ÷ 0.6 bar, depending on the diameter. maximum Working pressure: up to 10 bar. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease lithium A universal for lubricator 75/PK, 400 g.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP-W is improved solution ring EARCLIP. has inner an insert protecting, which role is protection surface hose in space crimp ring and ensuring more even clamping po circuit. recommended for hoses o delicate construction. rounded edges inside ring protect hose against damage. Material: steel AISI 304 (ring main), steel AISI 301 (insert).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "Y" with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "T" reducing of couplings push-in under hose o diameter metric, series S, type PUTM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee type TSM intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdhesive instant general use. adhesives wide range various substrates (metals, rubber, wood, cardboard, ceramics and most plastics). are suitable for use on surfaces o reaction acidic, such as surfaces chrome-plated or galvanised. gives high strength coupling, when element strictly adhere for each other. color: colorless. Working temperature range: od -40°C up to +120°C. Time to reach initial strength: 3-10 sek. Time to reach full strength: for 24h depending on material. certificate: P1 NSF Nr: 123000. Packaging - container 3 ml or 20 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket metal-rubber for use in installations high-pressure (for quick couplings, adapters with thread external). Working pressure: up to 1000 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring type TWO for use in couplings tankwagen 4" - MB, MKV and MK. Material: hypalon (SCM). range temperatures (approximate): od -20°C up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose, for installation o lower pressures. It is characterised by high flexibility and lightness. meets standards: EN 854 2TE and EN45545-2. Inner layer: black, flame-retardant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose chemical o multilayer the structure with inner layer with fluoropolymer FEP o unique resistance and inert chemical. Characterized significantly greater flexibility than rigid hoses made completely with PTFE or other fluoropolymers. smooth Layer inner, resistant and inert chemical eliminates risk contamination liquid. resistant to wide range substances chemical od substances corrosive for solvents based on MEK. hose Meets the requirements of hygienic and for contact with food: American FDA 21 CFR 177.1550, not contains phthalates ani BPA (bisphenol A), is non-toxic, not leaves odour ani taste. sterilization oxide ethylene. Used in various industrial applications: flow chemicals, substances pharmaceutical, drinks food, production and packaging paints, solvents and adhesives, for inks and toners, for chemicals photographic, fertilisers and pesticides, in production semiconductors. length full roll hose 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: FEP / PVC special. Maximum Operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose delivery flat-folding of couplings for water for pumps fire-protection. used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used for conveying water in industry, construction, agriculture and mining. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, with coating polyurethane, not taking dirt, increasing resistance to abrasion and contact with flame. certificates: hoses compliant with conditions technical regulation MSWiA with 27.04.2010 r.., hoses of couplings (A complete lines) have certificate approvals CNBOP-PIB. Inner layer: smooth polyurethane. Reinforcement: a polyester braid. Outer layer: red coating polyurethane. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose delivery REDSIL, has versatile use in wide the scope temperatures. uses go both for hot air, as and e.g. in systems cooling. intended for liquids and gases, used in many branches industry between other chemical. Inner layer: transparent silicone. Reinforcement: olpot PET (polyester). Outer layer: red silicone. Hardness: 70° ±5° Shore (A). Operating temperature: od -50°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for conveying substances food, pharmaceutical and cosmetic: water, juices fruit, beer, wine, vinegar, alcohols o a concentration up to 96%, milk and its dairy products, creams, soaps, substances aromatic, pigments and other. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. extruded, completely smooth surface inner and outer hose facilitates Flow rate and cleaning. Reinforcement spiral with stainless wire steel, embedded in wall with TPE-S, makes go resistant to vacuum and kinking. transparent wall allows on easy visual control of the flow. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. use for high-proof alcohol (its vapours or other flammable substances) requires taking into account hazards associated with electricity static. as hose reinforced only spiral (without braid) is characterized a certain elongation under pressure, therefore maximum pressure working hose is low (factor safety 1:5). Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: spiral of steel AISI 302. Working pressure: from 1 bar to 1.5 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with thread external NPT, with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK A with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap with thread internal BSP type A8 Intended for element pneumatics. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap (plug) ORFS with thread internal UNF (sealing on surface face), type VKA. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap tubes for system SPEEDFIT used in installations compressed air. Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall drums ECODORA series E-534. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check RFL L type U (coupling push-in on inlet and Connection threaded with an O-ring at the outlet, for valve) regulates stream flowing air in one direction. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle adjustable type FPSB used in systems hydraulic as element control intensity flow. regulation flow realised is using a knob. permissible direction flow: A → A1, A1 → A. Material: steel carbon, galvanized (body), steel (knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve 1/2" of steel stainless for multifunction use for water, agents cleaning, foam. It can be used independently or with quick coupling enabling connection many types lances and nozzles. secured against opening valve through fall on its lever. has solid cover with rubber EPDM protecting valve and floor against damage in case fall. Connections: BSP female. Material: steel AISI 304. Working pressure: up to 60 bar. Operating temperature: up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 5310, configuration T, intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female. Operating temperature: od -10°C up to +110°C
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of standard jaws for a FINN-POWER type P32 crimping press. Material: surface-hardened steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling GUILLEMIN with thread external BSP intended for installation industrial and transfer substances, bulk, granulates. Not is suitable for conveying steam and gases. coupling has symmetrical design parts connection. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: aluminum. Working pressure: 16 bar. sealing: white NBR rubber. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread internal BSP with swivel nut and fitting for hose, type MSL, intended is for mounting for hoses rubber and some plastic hoses industrial. depending on used material have use for all kinds media: substances chemical, products petrochemical, molten gas. Dla very aggressive substances chemical coupling coated are a lining with fluoropolymer E-CTFE and a lining in version conductive CF-E-CTFE (R 6 Ω). fixed using clamps shell EN 14420-3 / DIN 2817 (only clamp RS 636... and RS-637...). can be also crimped appropriate ferrules clamping. Working pressure: 25 bar. Coupling material: brass (MS), steel stainless 316 (SS), steel galvanized (ST). sealing: gasket flat (in set standard polyurethane, for steel stainless PTFE). Operating temperature: od -20°C up to +65°C acc. to EN-14420.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter hexagonal ADN with both thread external BSP, BSPT intended is for connecting lines (hoses with fitting) and element installation industrial. depending on size, material make and the manufacturer, coupling have various shapes flange under wrench. available are also adapters reducing. Material: steel stainless AISI 304 or AISI 316. sealing: flat (butt) - BSP; on the thread (tape PTFE) - BSPT. Working pressure: 25 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic sealant for threaded connections for 3" in installations metal. perfectly is suitable for applications ceiling and quick dispensing in low temperatures (e.g. in installations external). Not recommended for work with oxygen. Packaging capacity: 50 ml. Working temperature range: od -55°C up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA sensor proximity SQ type square for actuators is characterized a certain and quick a bracket using screws eccentric, the possibility mounting using a screwdriver and wrench Allen 2.5 mm, edges thrust locating A sensor during mounting, increased resistance to factors atmospheric and moisture (IP 67, IP 68, IP 69K). Material housing sensor: polyamide (PA). Voltage supply: 5 ÷ 30V AC/DC (10 ÷ 30V AC/DC - HALL). Operating temperature: od -30°C up to +80°C (od -5°C up to +80°C - installations dynamic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross with thread internal BSP for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle bent type Star-Tip, reducing level noise; The installation directly for body gun. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency safety and Health in use). length nozzle: 90 mm. Working pressure: 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead rotary ST-458 with a ceramic insert, spray angle 20°. Marked with different colours to identify the calibration. Working pressure: 200 - 400 bar. Material: brass and plastic plastic, Adapter of steel stainless. Operating temperature: up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bolted quick coupling CEJN 232 with thread external NPT and with valve intended for installation hydraulic o very high pressures, in which available large loads mechanical. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. can be connected/disconnected, when in system found pressure residual. caps of carbon steel should order separately. Material: steel carbon, galvanized. sealing: NBR. Flow rate: 1/4" - 16.4 l/min, 3/8" - 21.3 l/min (Δp = 4 bar). Working pressure: 700 bar. pressure bursting: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1800 bar (socket disconnected), 3/8" - 1850 bar (socket disconnected). Operating temperature: od -25°C up to +100°C.



















































