- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee reducing with thread internal BSP for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality multifunction flexible hose manufactured in Great Britain. intended for water, air and light chemicals. The hose material contains no phthalates, silicone or cadmium and complies with the RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure: from 10 bar to 18.3 bar - depending on the diameter hose. Operating temperature: od -20°C up to +55°C (momentarily +65°C, temperature bending on cold for -45°C). As the working temperature rises, the hose's working pressure value decreases.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket PTFE flat UBW140 for use in most demanding conditions. Due to many unique properties found use we all fields industry. Operating temperature: od -200°C up to +260°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket KMU Intended for socket lever coupling KLAUDIA. Material: EPDM. Operating temperature: od -25°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for conveying liquid chemicals, in this aggressive acids, bases, alcohols and other detergents used for cleaning installation in plants food (selection in accordance with rules acc. to chapter „hoses chemical” this catalogue). Layer inner with UPE compliant with requirements FDA for contact with food. Widely used in industry food, cosmetic, chemical and petrochemical. has copper cable ensuring continuity electrical between fitting hose. Layer outer resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : 1) hoses chemical EN 12115:2011. industry food, contact with food (Layer inner) 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. assembly : smooth ends with a spigot ("tail" into the hose) must be used, without sharp or high barbs that could cut or damage the UPE inner layer after clamping. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 16 bar. Vacuum: 0.8 ÷ 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery specially designed for transport water cooling, used at furnaces metallurgical, systems cooling transformers and transducers electric. used in metallurgy steel. Layer outer coated fiber glass resistant to action radiation heat up to +550°C (momentarily) and splashes hot materials. Layer inner insulating (dielectric), R>10 11 Ω, durable on breakdown electrical E≥6000 V/mm, o increased resistance to penetration water and steam at extreme parameters use. minimal radius bends in data technical stated is for pressure above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -35°C up to +120°C, outer up to +550°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. Confirmed hose service life of 400.000 pulse cycles. standards: exceeds EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement platinum o exceptional purity, intended for applications biotechnological. resistant to action high temperatures, ozone, radiation radiation, moisture, action conditions atmospheric. Not adsorbs and not absorbs odour ani taste. can be repeatedly sterilised in autoclave a also oxide ethylene or by radiation. Meets FDA requirements, USP kl. VI, ISO 10993, European Pharmacopoeia 3.1.9 and Japanese Pharmacopoeia - section 51. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: od -65°C up to +260°C. length hose: 7.62 m, 15.24 m or 30.48 m.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with rubber fluorine (fluorocarbon). length standard: 1000 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester + steel spiral (wall thickness wire 1.2 mm). Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of odour and taste, non-toxic, not containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food, in particular products milk, spices, concentrates vitamin, aromas etc. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant to action alkaline agents cleaning. can be used for pumps peristaltic (service life moderate). Meets the requirements of hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). possible sterilization steam or oxide ethylene. compliant with REACH and California Proposition 65 – not contains substances hazardous and banned. length full roll hose 15 m (od diameter internal 50.8 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum Operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic hydrocarbons aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling CEJN 116 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1500 bar (coupling connected). pressure bursting: 3000 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality plug water quick coupling NiTO 3/4" with thread external. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling NiTO of steel stainless AISI 316L with double fitting for hose. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Not can connect directly element with various systems e.g. socket 1/2″ with a plug 3/4″. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: od -20°C up to +150°C. Material seal: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK ERS with smooth fitting for hose made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for grease nipples type DIN 71412 A, DIN7 1412 B and DIN 71412 C. Material: PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall drums ECODORA series E-544. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type FPSU used in systems hydraulic as element opening free Flow rate in one direction. Flow rate throttled in direction opposite adjustable is using a knob. standard pressure opening 0.5 bar. permissible direction flow: A → A1 (free), A1 → A (throttled). Material: steel carbon, galvanized (body), steel (spring, ball, knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve electric SOV L should for family LINE ON LINE®, terminated coupling series Fox (line – line) and can be joined with other products in series or parallel. despite small sizes, valves SOV L controlled are electrically indirectly through co have very high parameters working. embedded on pin special seal polyurethane ensure long service life valve. air drain can be silenced through built-in silencer. each valve has monostable Control hand and indicator activation – diode LED. Working pressure: 2.5 ÷ 7 bar. Voltage DC: 24V. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled. Flow rate nominal: 380 l/min - Ø6, 700 l/min - Ø8 (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 4330 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female/BSP male. Operating temperature: od -20°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet for foam and washing: Gun NITO I COMBI (NT-53105A1), tank on agent cleaning with injector for foam, a hose suction and set nozzles dosing, lance 17 cm with nozzle for washing. maximum Working pressure: 6 bar. Maximum Operating temperature: +40°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of standard jaws for a FINN-POWER type P20 crimping press. Material: surface-hardened steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling GUILLEMIN with fitting for hose, with a lock (assembly clamp shell, a clamping ferrule or hose clamps) intended for installation industrial and transfer substances, bulk, granulates. Not is suitable for conveying steam and gases. coupling has symmetrical design parts connection. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: aluminum. Working pressure: 16 bar. sealing: white NBR rubber. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread external BSP, type VSL, with smooth tail for hose, under a clamp shell EN 14420-3 / DIN 2817 (only clamp RS 636... and RS-637...), for mounting for hoses industrial - e.g. in use transfer. available also of steel AISI 316 coated a lining with fluoropolymer E-CTFE and a lining in version conductive CF-E-CTFE (R 6 Ω), having use for very aggressive substances chemical. Working pressure: 25 bar (for version AL - 16 bar, PP - 6 bar). Coupling material: brass (MS), steel stainless AISI 316 (SS), steel galvanized (ST), aluminum (AL), polypropylene (PP). sealing: flat (butt). Operating temperature: od -20°C up to +65°C acc. to EN-14420.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling tee "L" with thread internal (sealing on surface face) and thread external UNF (O-ring in groove flat surface face), type EVL. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete reel Intended m. in. for conveying air, cold and hot water and detergents. Do mounting inside and on outside rooms. spring rewind tested for 30000 cycles winding and unwinding. compliant with the directive ATEX II 3 GD c IIB TX. standard in set found high quality hose polyurethane of spring anti-kink and coupling swivel allowing on free operation with connection for it e.g. a tool pneumatic. length hose supply: 1.5 m. Material: steel AISI 304. sealing: Viton. Operating temperature: up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter hexagonal DM with thread internal BSP intended is for connecting lines (hoses with fitting) and element installation industrial o pressures working for several dozen bar. used for all kinds media: water, air, substances chemical, products petrochemical. depending on size, material make and the manufacturer, coupling have various shapes flange under wrench. Material: steel AISI 316. sealing: gasket flat (PTFE).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn adapter made of high-quality glass-fiber-reinforced polypropylene, food-safe, intended for use with the most popular and most commonly used plastic barrels used for storing raw materials (200 liters). A tight connection on the DIN EN 12713 male thread is ensured by an O-ring gasket. Material: polypropylene glass-fiber-reinforced. gasket: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic reel drum of steel acid-resistant Intended for cold and hot water, oil, greases and other media. spring rewind tested for 25000 cycles winding and unwinding. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. W set stopper for hose. A reel not is equipped in hose, which should order separately. A bracket swivel or additional A bracket fixed for fast removal (e.g. in winter) ordered separately. advantages: Swivel coupling of steel AISI 304, sealing Viton. Material: steel AISI 304. sealing: Viton. Operating temperature: up to +130°C (without hose).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and very flexible even in low temperature hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Reinforcement spiral with hard PVC, resistant on impact, ensures good strength on vacuum and kinking hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. As a hose reinforced only with a rigid-PVC spiral, without a braid, it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. Hose material: green transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: od -25°C up to +55°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, gravelling roofs, cleaning industrial, abrasive for sandblasting, silos, tankers for bulk materials etc. compliant with the standard DIN 26057 Type 4 (SMARTFLEX® 2.0). Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense, thick spiral reinforcing ensures high resistance to vacuum. smooth inside, non-compressible, not very pliable, but flexible, also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 2.0 mm (SMARTFLEX® 2.0), 2.5 mm (SMARTFLEX® 2.5). Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA coil 30 mm Ø8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% for +10%. Protection degree: IP65 EN60529 with a connector. shape connector: DIN 43650 shape A. time use continuous: 100% ED.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, ergonomic nozzle shower color blue for spraying vegetables, fruit, ryb, tables working in industry food, large kitchens and plants catering. made with polyamide (PA66) compliant with FDA, with valve internal of steel stainless. seal with EPDM. Connection: 1/2" BSP female. Working pressure: up to 8 bar. Operating temperature: up to +80°C. weight: 0.26 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality socket water quick coupling NiTO 3/4" with thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° with thread internal BSP for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Standard arm length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting push-in swivel with an O-ring for gun high-pressure. prevents breaking line. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector angled 90° for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance without the head with insulation thermal type MT2 intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" BSP male. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThread impregnated Teflon for securing and sealing connections threaded in metal and plastic installations pipe. applied directly with container with built-in blade cutting guarantees speed and cleanliness mounting. Not cures, instant sealing occurs under full pressure. product has approval DVGW/KTW for use in installations gas and with water potable and certificate NSF/ANSI, Standard 61. color: white. Maximum thread diameter: R4". Working temperature range: od -55°C up to +130°C.



















































