0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A clamp shell made of special high-strength plastic, enabling easy assembly fittings hygienic for corrugated externally hoses series EASY (e.g. VINOFLEX EASY, MILLENNIUM EASY). A clamp has internal corrugations matched precisely for barbs hoses series EASY and is adapted for mounting fittings hygienic (DIN, SMS, Triclover and other) having standard spigot under a clamp shell. Working pressure: 10 bar. Material: high-strength plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting straight JIC 37° with thread external BSP (gasket elastomer o cross-section rectangular). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve spool, type 4/3, Controlled electrically of centering springs intended for mounting plate. used in systems hydraulic machine industrial. standard supplied with o-rings and screws mounting. connector equipped are in diodes signalling state supply. Material: cast iron (body), hardened steel (spool). sealing: NBR. maximum Working pressure: 315 bar (channels P,A,B), 160 bar (channel T). available on the following voltage control: 12 V DC, 24 V DC, 110 V AC or 220 V AC. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt hexagonal for clamp DIN 3015 heavy

          All products | Clamps for hydraulic pipes
          0 €
          Bolt with a hexagonal head for clamp DIN 3015 heavy complete type 201 with thread external metric. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tape for mounting information tags system Band-It® Tie-Lok®, made of steel AISI 304. strength, safe, o low-profile the lock and smooth surface internal. Band width: 1/4". Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          O-ring (range 36×1.5 ÷ 222×4), NBR70

          All products | General purpose seals
          0 €
          A seal with a circular cross-section (O-ring) for general use (range 36x1.5 ÷ 222x4). Material: NBR, hardness 70 acc. to Shore'a.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose ducting for machine CNC for machining wood P2CNC

          All products | Ducting and ventilation hoses
          0 €
          Hose intended for discharge dusts, sawdust, chips in industry wood and furniture. designed for machine CNC for machining wood and plastics: centres machining, milling machines vertical, plotters milling. thick steel spiral coated white PVC is resistant to corrosion, has good adhesion for material hose and ensures high parameters pressure. despite strong the structure, thanks to optimal matched large surge spiral is very flexible, pliable and compressible. especially recommended for extraction dust and chips from under quickly moving heads working (CNC Router Dust Collection System). resistant to microbes, hydrolysis and oils and gasoline. Contains no halogen compounds or plasticisers. flame-retardant, compliant with the standard German DIN 4102 Class B1. hose can treat as conductive electrically po made earthing spiral, in accordance with German recommendations industrial BGI 739-2. Assembly on connectors with bridge clamps (prawo-handed). Other diameters are available on special order in the scope 80 ÷ 600 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose delivery for conveying water JAMAICA L

          Air and water hoses | All products
          0 €
          Very light, flat (at rest) industrial hose delivery, PVC. thanks to appropriate matched reinforcement textile spacer polyester has good resistance to elongation. intended for pressure conveying water and other liquids. Widely used in agriculture, construction, industry marine, mining, etc. length standard roll: 50 m or 100 m. Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: blue PVC. Working pressure: from 2.5 bar to 8.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF NMV series COMPACT "N" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve poppet type 2028 with seal metal-metal and stem rising, intended for installation industrial. allows adjustment or throttling, at small speeds flow. maximum pressure working fixed in full the scope temperatures use. Material body: cast steel stainless CF8M. Material poppet: cast steel stainless CF8M. Material a knob: aluminum. sealing stem: PTFE. Connection: BSP female. Operating temperature: od -20°C up to +200°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve alloy with a female BSP thread, type 2350

          All products | Check valves and filters
          0 €
          A universal valve alloy (valve installed on the end pipeline suction) intended for installation industrial. It can be used for water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve. valve must be mounted in accordance with direction flow the medium indicated on body, in position vertical. maximum pressure working fixed in full the scope temperatures use. minimal pressure opening is directly proportional for the height column water nad valve, e.g. for 10 m, pressure opening is 1.0 bar, for 5 m, pressure opening is 0.5 bar. Body material: brass. butterfly valve: brass. sealing butterfly valve: NBR. Connection: BSP female. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling gravity OLS CAMLOCK A, aluminum

          All products | Loading and unloading couplings
          0 €
          One-piece coupling gravity OLS, angle 22.5°, CAMLOCK A. Intended for unloading gravity tankers (pressure use not should exceed 1 bar). Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). sealing: NBR. Working pressure: 6 bar. Material: aluminum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling swivel angled 90° G90 with bearing ball intended for oil hydraulic and other media industrial. used in systems demanding connections swivel in order to eliminating stresses hoses. coupling intended are for performing revolutions at small moment swivel. Not are designed for use with large speeds swivel. Material: steel AISI 316L. sealing: Viton. Connection: male / BSP female. Operating temperature: od -15°C up to +250°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Swivel coupling single, brass

          Accessories for pneumatic fittings | All products
          0 €
          Single Swivel coupling on one side terminated thread external with the other thread internal. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° with spigot, type R46, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure 90° adapter type A114C with thread external BSP (sealing 60° cone) and with thread internal BSP, with a nut swivel (sealing 60° cone), version "compact". Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A cross plug-in, type R40

          All products | Push-in fittings
          0 €
          A cross plug-in, type R40, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic screw BSP male, steel carbon, AGR type S

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic screw, type S, with a male BSP thread, cone sealing 60° (AGR). Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A mounting foot model A for mini actuator ISO 6432. size actuator: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional multi-outlet with outlets 1/8”, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional multi-outlet with outlets 1/8" for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. inlet - threads internal 1/4" BSP, outlet threads internal 1/8" BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Aluminum Gun for compressed air, intended for removing with surface all contaminants: liquids, fine chips, filings etc. regulation flow degree press lever. made method casting with aluminum. Gun equipped is in nozzle SAFETYSTAR, replaceable, with thread connection external M12x1.25, bent o length 110 mm of nickel-plated steel. ideal works for blowing out places hard reachable, improving simultaneously conditions use through reduction level noise for 80 dB. instead of nozzle SAFETYSTAR install can other nozzles – see accessories for guns EWO. depending on the connection we distinguish Gun terminated a plug EUROSTANDARD 7.2, fitting for hose o diameter 6 mm, 9 mm and 13 mm or thread internal 1/4". Material: aluminum (cast). pressure maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate top for clamp DIN 3015 double

          All products | Clamps for hydraulic pipes
          0 €
          Plate top for mounting clamp DIN 3015 double complete type 301. Material: steel carbon, galvanized or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle Intended for washing and cleaning water, which stream adjustable is thanks to swivel the head. Flow rate can be completely closed through solid tightening the head. mechanism made with brass, cover and the gasket with rubber EPDM. Available with handle in color blue, red and white ( AK-MSHH4-BK - version without handle, 1/2" BSP male). W case use with hot water, should maintain particularly agents caution. Not It is intended for steam! Connection: 1/2" BSP female. maximum Working pressure: 16 bar. Maximum Operating temperature: +80°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting straight JIC 37° with thread external UNF (sealing an O-ring). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer compressed air MR, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Regulator MR series BIT. A basic version for regulating compressed-air pressure in a pneumatic installation. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar, 0 ÷ 8 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tape for mounting information tags system Band-It® Tie-Lok®, made of steel AISI 304. strength, safe, o low-profile the lock and smooth surface internal. Band width: 1/4". Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          O-ring, FPM (Viton)

          All products | General purpose seals
          0 €
          A seal with a circular cross-section (O-ring) for general use. Material: Viton, hardness 80 acc. to Shore'a.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Gasket coated coupling CAMLOCK, FEP/silicone

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Gasket coated for part female (socket) coupling CAMLOCK. Material: FEP/silicone. Operating temperature: from -60°C to +205°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for the system exhaust BOAT ETNA

          Air and water hoses | All products
          0 €
          Light, very flexible hose suction-delivery intended for systems exhaust cooled water engines diesel boats motor and yachts (free discharge mixed exhaust gases and water cooling). used in short sections between pipes installation. Layer inner resistant to exhaust gases. Layer outer resistant to fire and conditions atmospheric. has resistance to vacuum. compliant with certificate type Lloyds 99/00169 (E4), approved VTT in accordance with Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black, corrugated synthetic rubber CR. pressure bursting: ≥ 2 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose intended for conveying cold water potable (+23°C - approvals KTW, DVGW - Germany, WRAS – Great Britain, D.M.174 – Italy) in industry and in use such as households domestic, campsites etc. Material layer internal o quality food, free of odour and taste ensures retention unchanged properties organoleptic water. free of phthalates. Layer outer resistant to conditions atmospheric. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) approval for water potable: UBA-Leitlinie, KTW, DVGW W270, D.M.174, WRAS in accordance with BS 6920. 3) industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); 21CFR 177.1520, BfR III, 10/2011/EU (Layer inner). Inner layer: white plastomer. Reinforcement: a synthetic braid. Outer layer: blue synthetic rubber. Working pressure: 20 bar. Operating temperature: -30°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, exceptionally flexible and pliable hose o sound resistance chemical and on radiation UV. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. intended for discharge air, vapours and gases. used in industry chemical and in systems ventilation and air conditioning in vehicles. available other diameter in the scope 30 ÷ 610 mm. Checking chemical resistance - the chemical resistance table for polypropylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: black soft polypropylene (PP). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality plug water quick coupling NiTO 1" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling QC6 compliant with the standard Standard Instrumentation, with thread external NPT, BSPT or BSP. QC6 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested at a pressure of 68 bar in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. plug occurs in version without valve and with valve. Material: steel AISI 316. Working pressure: 103 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF OTC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 4331 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: steel carbon. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female/BSP male. Operating temperature: od -20°C up to +110°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve regulating needle with thread internal BSP serves for regulation quantity flowing the medium in installation through change cross-section hole through-flow, until for its complete closing. intended are for installation aircraft, possible is also ich use with non-flammable and non-toxic gases (nitrogen, dioxide carbon, hel, argon, etc.). valves needle have brass cone (needle), which displacement allows smooth adjustment od position maximum open for closed. direction flow Marked is an arrow on body valve. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material needle: brass. sealing stem: NBR. Working pressure: from 25 bar to 40 bar, depending on the diameter internal DN. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling used for systems demanding connections swivel and in order to eliminating stresses hoses. is characterized small dimensions and small torque swivel. Maximum speed rotational is 60 obr/min. can be used for oil hydraulic. body: brass. stem internal: hardened steel. A nut: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling recovery vapours DVR, aluminum

          All products | Loading and unloading couplings
          0 €
          Coupling recovery vapours DVR with a probe without valve (CAMLOCK D with a female BSP thread). Dla medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. sealing: NBR. Working pressure: 6 bar.
        Go to Top