0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter, hydraulic, type A102, with thread external BSPT (sealing on the thread) and with thread external BSP (sealing 60° cone). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nozzle for gun PROFICLEAN 416, brass

          All products | Low-pressure water spray guns
          0 €
          Nozzle for gun PROFICLEAN 416 with thread M21 x 1.5 (O-ring). standard in gun nozzle Ø 2 mm. available diameter: 2 mm, 4 mm or 5.5 mm (L = 13 mm, with thread) and 4 mm in version o length 28 mm and 58 mm. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle flexible, coated copper with the possibility bending and adjustment for specific tasks, in hard reachable places; The installation directly for body gun. length nozzle: 400 mm. Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket coupling CAMLOCK CR with a serrated hose fitting, aluminum

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket coupling CAMLOCK CR (reducing) with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum. Levers: brass. Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic screw, type S, with tube metric, sealing a ring cutting (BES), angled 90° series heavy. Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cube directional 4 – road, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional 4-output (4x thread internal BSP) for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plate connection Intended for connecting lines hydraulic with valve (manifold) plate. the connection is found po sides plates. Material: steel. maximum Working pressure: 315 bar. Operating temperature: od -20°C up to +80°C (medium), od -20°C up to +50°C (ambient).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting angled 90° adjustable JIC 37° with thread external BSP (sealing an O-ring with a retaining ring). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt Allen for clamp DIN 3015 standard, steel AISI 304

          All products | Clamps for hydraulic pipes
          0 €
          Bolt with an Allen head for clamp DIN 3015 standard complete type 100 with thread external metric. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Suction-delivery hose intended for conveying many light products alcoholic such as: beer, wine, cider and drinks non-alcoholic. The inner layer is free of phthalates, plasticisers and components of animal origin, co eliminates risk contamination medium and growth bacteria. Layer outer resistant to abrasion, o sound resistance to aging. standards and requirements : 1) general EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white rubber bromobutyl (BIIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          O-ring (range 6.5×1 ÷ 50.4×3.53), NBR90

          All products | General purpose seals
          0 €
          A seal with a circular cross-section (O-ring) for general use (range 6.5x1 ÷ 50.4x3.53). Material: NBR, hardness 90 acc. to Shore'a.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for tools pneumatic SUPER NOBELAIR

          Air and water hoses | All products
          0 €
          Flexible hose intended for compressed air. recommended for tools pneumatic, compressors, hose reels drum, etc. Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: beige PVC. Working pressure: 20 bar. Operating temperature: od -15°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose ducting SUPERFLEX PULR

          All products | Ducting and ventilation hoses
          0 €
          Light, very flexible hose intended for discharge dusts, sawdust, chips, light bulk materials o properties abrasive. used in industry wood, construction, food. resistant to ozone. Wall thickness measured between the spiral. available other diameter in the scope 20 ÷ 600 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated (version L/R) or galvanized (version L) spiral with wire steel. Operating temperature: od -40°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose thermoplastic with a steel braid SM040

          All products | Thermoplastic hoses
          0 €
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling QC4 compliant with the standard Standard Instrumentation, with connection LET-LOK®. QC4 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested at a pressure of 68 bar in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. plug occurs in version without valve and with valve. Material: steel AISI 316. Working pressure: 206 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling with "tail" for hose, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Buckles for tape Ultra-Lok®, steel AISI 201

          All products | Band clamping system
          0 €
          Buckles for the system band Band-It® Ultra-Lok®. Material: steel AISI 201.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 7100 intended for installation gas, in class pressure MOP 5-20. meets requirements the directive PED 2014/68/UE and 2009/142/WE, compliant with the standard EN331 + A1. maximum pressure working fixed in full the scope temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSP female. Operating temperature: od -20°C up to +60°C
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN20. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1" BSP female. Diameter disc pressure gauge: Ø63. Flow rate: 5000 l/min (at an inlet pressure of 20 bar Δp = 4 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve regulating needle with thread external BSP serves for regulation quantity flowing the medium in installation through change cross-section hole through-flow, until for its complete closing. intended are for installation aircraft, possible is also ich use with non-flammable and non-toxic gases (nitrogen, dioxide carbon, hel, argon, etc.). valves needle have brass cone (needle), which displacement allows smooth adjustment od position maximum open for closed. direction flow Marked is an arrow on body valve. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material needle: brass. sealing stem: NBR. Working pressure: from 25 bar to 40 bar, depending on the diameter internal DN. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Swivel coupling angled 90° R-GG90 with bearing ball intended for oil hydraulic. used in systems demanding connections swivel in order to eliminating stresses hoses. coupling intended for performing revolutions at small moment swivel. Not is designed for use with large speeds swivel. Material: steel galvanized. sealing: NBR. Connection: female / BSP male. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° long with thread external, type R36, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A104 with thread external BSP (sealing 60° cone) and with thread internal BSP, with a nut swivel (sealing 60° cone). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: plug NiTO 1/2". Working pressure: up to 25 bar. Material: brass chrome-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A QC4 quick coupling socket compliant with the Standard Instrumentation standards with valve, with connection LET-LOK®. QC4 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested at a pressure of 68 bar in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. Material: steel AISI 316. Working pressure: 206 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting for hose with male thread, brass

          All products | Quick couplings for water
          0 €
          A fitting for hose with thread external in system 1/2", 3/4" or 1". Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic screw, type S, with tube metric, sealing a ring cutting (BEL), angled 45° series light. Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional with opposite outlets 1/8” – 1/4”, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional with opposite outlets 1/8" - 1/4" for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt stacking for clamp DIN 3015 double

          All products | Clamps for hydraulic pipes
          0 €
          Bolt stacking for clamp DIN 3015 double type 301 with thread external and internal metric, Intended for mounting clamps one on the other. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A tag information system identification Band-It® Tie-Lok® for self marking hoses Available in three sizes: 51x19, 63.5x38 and 89x19. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "T" adjustable with thread external, type R16, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          O-ring, EPDM

          All products | General purpose seals
          0 €
          A seal with a circular cross-section (O-ring) for general use. Material: EPDM, hardness 70 acc. to Shore'a.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light hose suction-delivery intended for handling milk and its products and substances food, demanding use rubber free of odour and taste. Not contains phthalates, plasticisers and products origin animal. Layer inner resistant to standard used in industry food agents and processes cleaning. special The design hose „CRUSH PROOF” allows return hose under pressure for primary shape po accidental running over go e.g. truck forklift. hose is light and easy for handling. especially recommended for applications demanding small radius bends. retains its flexibility even in low temperatures. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification). Inner layer: white, smooth rubber NR/NBR. Reinforcement: cord synthetic, spiral plastic. Outer layer: blue synthetic rubber. Working pressure: 6 bar. Operating temperature: od -30°C up to +85°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable hose intended for discharge vapours paints, solvents, contaminants air and dusts in spaces hazardous explosion. used also for conveying air in plants biogas. permanently antistatic (R ≤10 8 Ω), compliant with the standard technical TRGS 727 and the standard TRAS120 for plants biogas. resistant to hydrolysis and corrosion biological. Retains flexibility at low temperatures, flame-retardant - Meets the requirements of standards DIN 4102 B1 regarding properties fire materials construction. On special order available also other diameter in the scope 20 ÷ 800 mm. Checking chemical resistance - the chemical resistance table for PCV (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: fabric polyester impregnated black PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Rubber hose A universal intended for low-pressure applications: oil hydraulic, installation pneumatic and water. Widely used for cooling moulds injection. Layer inner with rubber synthetic resistant to high temperature (oil mineral), Layer outer resistant to conditions atmospheric, abrasion and oil. Not recommended for flame-retardant liquids hydraulic based on esters phosphate. Safety factor 3:1. The hose is designed to work with self-clamping PUSH-ON type ends. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: blue or red synthetic rubber. Working pressure: from 14 bar to 24 bar - depending on diameter hose. Operating temperature: up to +135°C (oil mineral), up to +80°C (water), up to +70°C (air).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong, flexible, resistant to kinking hose suction - delivery o black serrated layer outer, designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. Dla diameter 90 mm Available in sections 2 m with soft, free of spiral ends. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug coupling CAMLOCK AU with a thread internal, aluminum

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Plug coupling CAMLOCK AU with a thread internal BSP (Flat gasket polyurethane) made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle type MRF NMB series COMPACT "N" used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 4350 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSP female/BSPT male. Operating temperature: od -20°C up to +150°C.
        Go to Top