- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-B of couplings push-in used mainly as valve safety. Po mounting on connections supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter STORZ with thread external BSP intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. available in version forged o pressure working up to 16 bar and in version cast, characterized by significantly smaller strength o pressure working up to 6 bar. Material: aluminum. Working pressure: 16 bar (coupling forged), 6 bar (coupling cast). gasket: white NBR rubber (coupling forged), black NBR rubber (coupling cast).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector type LET-LOK® for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAsymmetrical reducing straight connector KRA intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - cap high-pressure type A112 with thread internal BSP, with a nut swivel (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread external BSP (sealing on cone internal 60°) and thread external NPT (sealing on the thread) enabling connection quick couplings and hoses UHP of each other, a also connection ich for blocks connection UHP. Material: steel galvanized on black. Working pressure: 1500 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic trigger condensate series NEW DEAL. Working pressure: 10 bar. Operating temperature: up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular 90°, screw, with a nut and a ring for crimping on hose. recommended for hose LPG. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFittings made with soft PVC intended for hose SUPERELASTIC. available also polyethylene connector T and Y mounted inside hose. color black. temperature use od 0ºC for + 70ºC (momentarily for + 80ºC).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting with thread internal, type FACP, for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug JIC 37° with thread internal UNF (sealing on cone internal 37°). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTiming element, which function is achieving delay for signal pneumatic. value delay signal output sets through knob regulating. value maximum delay can be increased through connection additional bowl external. built-in indicator pressure and coupling push-in under line 4 mm. assembly in any position. Material: body - aluminum anodized/plastic plastic, element internal: brass/plastic plastic, sealing - NBR. Operating temperature: od -10°C up to +60°C. Working pressure: 2.5 up to 8 bar. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. range set delay: 0 for 30s at 6 bar. time resetting signal: <0.1s. repeatability: +/-0.4 s.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "Y" with spigot, type R24, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA flat IBC gasket for a flange ASA made acc. to standards ASME B16.21 (ANSI). The permissible pressure working, at which can be used a given gasket depends od temperatures and kinds medium (selection should agree with TUBES INTERNATIONAL®). at selecting the gasket should pay attention on dimension diameter outer, appropriate for class flange. For example: a gasket DN 15 ASA600 is suitable for class ASA300 and ASA400. Material: PTFE. Working pressure: up to 300 bar. Operating temperature: od -200°C up to +220°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting. thick Layer inner with rubber o very sound resistance to abrasion (50±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. Used for sand and steel shot in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. commonly used in industry metal and shipbuilding. Mounted with special sandblasting ends. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber NR/SBR. Working pressure: 12 bar. Operating temperature: od -40°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap coupling CAMLOCK DP made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter STORZ with thread external BSP intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: steel stainless. Working pressure: 16 bar. Gasket: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling A cross type LET-LOK® for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Tee high-pressure type A117 with threads internal BSP, with nut swivel (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench disassembly serving for detachable hoses od lines push-in. intended for series R. Diameter outer hose od 4 for 14 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting made with soft plastic, Intended for screwing on on hose EVA.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular straight, screw, with a nut and a ring for crimping on hose. recommended for hose LPG. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting with thread external, type MACP, for hoses brake PTFE (sealing cone internal). Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall spongy for cleaning hoses intended for pouring concrete. type structure: soft, medium, hard.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut Intended for connections fitting (fittings) JIC37° with hydraulic seamless tube precision. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWasher round acc. to DIN 125 A. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LET-LOK® straight fitting with thread external BSP for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA standard handle (lever) for CAMLOCK couplings, type HR. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple compressed air series BIT with connection BSP female ensures correctness lubrication mist oil equipment in installations pneumatic and is characterized high stability lubrication. especially recommended for use at low values flow. Size: 1/8", 1/4". capacity bowl: 26.5 cm³. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4". Flow rate: 710 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar and Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for adapters UHP with thread external. Material: steel carbon, galvanized on black. Working pressure: 700 bar (at factor safety 4), 1000 bar (at factor safety 2.8). Material: steel carbon, galvanized on black.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA STORZ coupling with a flange connection intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: steel stainless. Working pressure: 16 bar. Gasket: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - Tee high-pressure type A109 with thread external BSP (sealing 60° cone). Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA crimped BANJO fitting, side 45°, for PTFE brake hoses. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp for connecting hoses SPIRAFLEX ending rings. made with profile, PVC, of steel galvanized a cable tensioning. lock with a lever of galvanized steel. width about 60 mm. ensures fast connection and disconnection sections hoses SPIRAFLEX, easy design runs blowing and ventilation in conditions field. on request Available in many other sizes in the scope DN150 – DN1200.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T", adjustable with thread internal, type R35/F, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA CAMLOCK SAFETY BUMP coupling socket cap; it is an alternative solution to traditional CAMLOCK coupling caps, thanks to a specially designed handle that facilitates handling the hose. It is used in the chemical and petrochemical industry. It is made in an antistatic version in black, from a glass-fiber-reinforced composite material.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCotter pin protecting a clamp coupling grooved. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NTV series COMPACT "N" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.



















































