- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off V3V manual with a lock, series SKILLAIR®, without plates end. task its is separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. W position rest (closed) can be closed on a padlock co secures valve against switching on through unauthorised persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Flow rate nominal: depending on size for 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet for connections flange (EN 1092), type SZ2. W set: screws DIN 933 - 4 pcsi, a nut - 4 pcsi and washer - 4 pcsi. Class properties mechanical: A2-70 - screws; A2-70 - a nut. Selection of bolts and nuts for flanges according to the table in the attachment. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling STORZ with fitting for hose intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: steel stainless. Working pressure: 16 bar. Gasket: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling angled 90° JIC 37° with thread external UNF (sealing on a 37° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector type LET-LOK® for an inch tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread external BSP (sealing on cone internal 60°) and thread external NPT (sealing on the thread) enabling connection quick couplings and hoses UHP of each other, a also connection ich for blocks connection UHP. Material: steel galvanized on black. Working pressure: 1500 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A202 with thread external BSP (sealing 60° cone) and with thread external NPT (sealing on the thread). Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter accurate DEP series SYNTESI®, without connections end, serves for removal with high accuracy contaminants liquid or solid, contained in compressed air. high accuracy filtration obtained is through use special element filtering called „an insert coalescing”. Size: SY1, SY2. Filtration grade: 0.01 µm - Class purity air acc. to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: od -10°C up to +50°C. Condensate drain: manual / semi-automatic (RMSA). Flow rate recommended: 460 l/min - size SY1, 620 l/min - size SY2 (at pressure 6.3 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped BANJO fitting 45° for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug JIC 37° with thread external UNF (sealing on cone external 37°). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsChain for coupling CAMLOCK. length: 300 mm. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° type LET-LOK® with thread external BSPT for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working fittings specifies on the basis of a given size and type connections threaded (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee 45° KTSB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T" with spigot, type R48, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket lip Intended for hoses suction-delivery. Do applications food (for contact with water potable - indexes marked on the end digit "05"). Material: white NBR rubber. Operating temperature: od -40°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElement logic AND-and. Control through compressed air, zeroing through compressed air. assembly in any position. Material: body - plastic plastic, stem - aluminum, sealing - NBR. Flow rate nominal: 100 Nl/min for 6 bar at a drop pressure 1 bar. built-in coupling push-in under line 4 mm. Operating temperature: od -10°C up to +60°C. Working pressure: 0 up to 8 bar. pressure control: 1.5 up to 8 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - nipple high-pressure type A202, with thread external BSP (sealing 60° cone) and with thread external NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with threads external BSP (sealing using the gasket metal-rubber) enabling connection quick couplings and hoses UHP of each other, a also connection ich for blocks connection UHP. Material: steel galvanized on black. Working pressure: 1500 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralised compressed-air systems or in the immediate vicinity of actuating devices. Size: 1/8", 1/4". Filtration grade: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet rings inch (front + rear) for use in connectors type LET-LOK®. amount: 10 pcs. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped BANJO fitting side 15° for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut Intended for connections fitting (fittings) JIC37° with hydraulic seamless tube precision. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDirectional valve plug-in side with thread external, type R45, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for couplings CAMLOCK AU and DU intended for sealing connection thread internal with parallel a thread external. Material: PTFE. Operating temperature: from -20°C to +220°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and thick hose suction-delivery intended for conveying bulk substances abrasive e.g. powders, cement, granulates, abrasive etc. externally Serrated, inside smooth. Layer inner with resistant to abrasion polyurethane. is characterized good resistance on impacts external and heavy conditions use. resistant to radiation UV and low temperatures. hose has arranged next to spiral cable copper coated polyurethane, which po earthing (or connection with earthed fitting) discharges charges electrical. used in installations industrial, for handling, in construction and industry shipbuilding. Inner layer: blue polyurethane. Reinforcement: rigid-PVC spiral. Hose material: grey and violet PVC. Working pressure: from 5 bar to 6 bar - depending on the diameter hose and temperatures. Vacuum: for 0.9 bar. Operating temperature: od -20°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off 3/2 used as valve switching and venting installations pneumatic. when sleeve control shifted is for the back, then configuration pneumatic is vented, a when sleeve is shifted for the front, to configuration pneumatic is pressurized. Working pressure: 10 bar. Operating temperature: od -10°C up to +80°C. Body material: brass chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling STORZ with fitting for hose under a clamp RS intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: aluminum. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A115C compact with threads internal BSP (sealing 60° cone). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular BURGACLIP with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp regulated a lever for coupling grooved without the gasket and cotter pins protective. Material: steel carbon. Working pressure: 85 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° adjustable JIC 37° with thread external NPT (sealing on the thread – PTFE tape or anaerobic sealant). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bolt for a BANJO connector, intended for fastening brake lines. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket Leak-free quick coupling ISO-F "flat-face" type IF with thread internal BSP. intended mainly for machine construction, in which available large strokes pressure. coating zinc - nickel ensures several times greater resistance to corrosion, than in case coating zinc. socket has stem securing against accidental disconnection. interchangeable with quick coupling ISO-F other manufacturers. Application: hydraulics power (oil hydraulic). Material: steel with coating zinc-nickel. sealing: NBR (temperature use od -25°C up to +100°C); Viton (temperature use od -15°C up to +200°C). Working pressure: up to 400 bar (depending on size quick coupling). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for adapters UHP with thread external. Working pressure: from 2000 bar to 3000 bar (depending on size thread). Material: steel carbon, galvanized on black.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off Controlled manually V3V series SYNTESI®, without end connections, serves for separation the system working od air supply. is to valve three-way, two-position, normally closed. W position closed cuts off air supply and vents configuration, co makes go especially useful at performing work service. has configuration allowing on mounting dwu in size SY1 or three in size SY2 padlocks o diameter 3 mm. alternatively Available is version with a hole Ø 7 for single padlock. On rear and front surface valve is found the connection auxiliary (1/8” for rate SY1 and 1/4” for size SY2) for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Connection: 1/8" BSP female, 1/4", with the front and with the back. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Flow rate nominal: for 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever front with a roller, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling STORZ with thread internal BSP intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: aluminum. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° with thread external tapered, type R39C, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter parallel with round holes with thread BSPT for use at hoses for drawing water, sewage, emptying tanks etc. Material: steel carbon, galvanized.



















































