- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose, PVC intended for water. It can be used for conveying water potable (short-term contact with water potable) – has issued in the Czech Republic certificate conformity with requirements 409/2005 Sb for this use (contact Tubes International). Do use in industry, agriculture, horticulture and use domestic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 10 bar to 17 bar - depending on the diameter hose. Operating temperature: od -5°C up to +60°C. As the working temperature rises, the hose's working pressure value decreases.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press UPS Intended is for crimping using lever manual, hoses o reinforcement textile ferrules sheet-metal type EC. standard equipped is in two sets (po 6 segments clamping) jaws. range use o diameter internal crimped hoses for press UPS-1: DN 3 ÷ 8 (range diameters internal ferrules EC: 8 ÷ 17 mm), DN 10 ÷ 16 (range diameters internal ferrules EC: 18 ÷ 28 mm). range use o diameter internal crimped hoses for press UPS-2: DN 20 (range diameters internal ferrules EC: 30 ÷ 34 mm), DN 25 (range diameters internal ferrules EC: 32 ÷ 38 mm). Do press exists possibility purchase base o index EC-100250.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimper hand TNT250/P (clamp six-jaw) with manual pump hydraulic MPT100. head crimpers allows gear ratio jej through hose, co is important at crimping ends angled. W set is found : 6 sets jaws for hoses standard and o reduced diameter outer, grease, plastic caliper, Case. the given force crimp at 700 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimper hand TNT8 (clamp eight-jaw) with manual pump hydraulic. head crimpers allows gear ratio jej through hose, co is important at crimping ends angled. W set is found : 6 sets jaws for hoses standard and o reduced diameter outer 5/16", 5/16 ÷ 13/32", 1/2", 13/32", 1/2" ÷ 5/8" and 5/8", Case. the given force crimp at 200 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Giant. Buckles for heavy applications (for hoses o large diameters - above 150 mm). Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap CEJN series 115, 116, 117 and 125 protecting against contamination and damage. Material: PVC. Available in colors: red, black or blue.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap GROMELLE series H-5000, protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap dust-tight socket quick coupling ISO-B protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap screw-together with a chain, series W-6000, protecting against contamination and damage. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap screw-together, type WSC, protecting against contamination and damage. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap dust-tight socket quick coupling TEMA protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap HQ series HPA. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap with a chain protecting against contamination and damage. Material: brass chrome-plated. Working pressure: 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap lever coupling ANFOR. Material: steel galvanized. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap lever coupling LAUX 42. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap (plug) SKV, as element closing, for use in systems hydraulic. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap NOR with a chain Intended for fittings symmetrical type STORZ designed in accordance with Norwegian the standard national. Material: bronze. sealing: NBR. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap (plug) ORFS with thread external UNF, type ROV. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap A guard quick coupling (for socket and plug) protecting against contamination and damage mechanical, for series 1100 and 1100N. thanks to use caps (covers), increases service life quick coupling. Material: high-strength plastic, PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap A guard quick coupling (for socket and plug) protecting against contamination and damage mechanical, for series 1300 and 1300N. thanks to use caps (covers), increases service life quick coupling. Material: high-strength plastic, PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap A guard quick coupling for socket and plug, protecting against contamination and damage mechanical, for series 1800 and 1800N. thanks to use caps (covers), increases service life quick coupling. Material: high-strength plastic, PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap brass for a nut. range diameters external pipes od 4 for 22 mm. standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap STORZ, fitted in valve trigger without a chain, Intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: aluminum. Working pressure: 16 bar. gasket: white NBR rubber.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap hexagonal with thread external NPT, type 108H, for connector threaded intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap dust-tight socket quick coupling TEMA protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap or plug quick coupling screw-together, type PVV3, protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: polypropylene. color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap DIN 2353 Eaton Walterscheid™, type VKA: 24° cone DIN 2353 with an O-ring NBR. Compatible with a nut DIN 2353 type M. occurs as: LL (series very light), L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap push-in (plug) with a lock nut SKV, as element closing, for use in systems hydraulic. Material: steel galvanized. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap push-in for socket system STECKO. Material: steel free-cutting, galvanized. sealing: NBR (O-ring), teflon (ring thrust).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap CEJN series 115, 116, 117 and 125 protecting against contamination and damage. Material: PVC. Available in colors: red, black or blue.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap PD, standard ISO 15171-1. Material: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap water quick coupling NiTO 1". Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap GROMELLE series H-5000, protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap ISO-A protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color: blue.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap dust-tight plug quick coupling ISO-B protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together with a chain, series W-6000, protecting against contamination and damage. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together, type WSC, protecting against contamination and damage. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together with a chain, type TC, protecting against contamination and damage. Material: galvanised carbon steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap dust-tight plug quick coupling TEMA protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap HQ series HPA. Material: steel carbon, galvanized.

















































