0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug cap TEMA 100

          All products | Measurement sets
          0 €
          Plug cap TEMA 100 protecting against contamination and damage. Material: PVC or steel carbon.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug cap coupling CAMLOCK SAFETY BUMP, black

          All products | CAMLOCK couplings and IBC fittings
          0 €
          A CAMLOCK SAFETY BUMP coupling plug cap; it is an alternative solution to traditional CAMLOCK coupling caps, thanks to a specially designed handle that facilitates handling the hose. It is used in the chemical and petrochemical industry. It is made in an antistatic version in black, from a glass-fiber-reinforced composite material.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug cap lever coupling ANFOR. Material: steel galvanized. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A BAUER lever coupling plug cap. Material: steel carbon, galvanized. sealing: NR/SBR. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Cap Intended for plug lever coupling FERRARI, type F.5B, used between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: rubber NR-SBR. Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling plug cap. Material: steel AISI 316. sealing: EPDM. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling plug cap. Material: steel carbon, galvanized. sealing: EPDM. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A GUILLEMIN coupling cap with a chain, aluminum

          All products | Symmetrical claw couplings
          0 €
          A GUILLEMIN coupling cap with a chain. has symmetrical design parts connection. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: aluminum. Working pressure: 16 bar. sealing: white NBR rubber. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A GUILLEMIN coupling cap with a chain, steel stainless

          All products | Symmetrical claw couplings
          0 €
          A GUILLEMIN coupling cap with a chain. has symmetrical design parts connection. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: steel AISI 316. Working pressure: 16 bar. sealing: black rubber FKM-Viton. Operating temperature: od -10°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cap coupling ROTTA ROTH with a chain, bronze

          All products | Symmetrical claw couplings
          0 €
          Cap coupling ROTTA ROTH with a chain. has symmetrical design parts connection. Material: bronze. Working pressure: 10 bar. sealing: NBR rubber. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cap coupling SMS with a chain, bronze

          All products | Symmetrical claw couplings
          0 €
          Cap coupling SMS (Sweden) with a chain. has symmetrical design parts connection. Material: bronze. Working pressure: 10 bar. sealing: NBR rubber. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve 2″ IBC for an IBC container, polypropylene, type IBV 2

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Valve 2" for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. The valve is additionally equipped with a locking latch and a cap. Lever in blue. Valve outlet connection: male S60x6. Material: polypropylene. Sealing: none. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve 2″ IBC for an IBC container, polypropylene, type IBV 3

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Valve 2" for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. As standard, equipped with an EPDM gasket. The valve is additionally equipped with a lever lock (in the molds of a screw) and a two-part cap. Lever in red. Valve outlet connection: male S60x6. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve 2″ IBC for an IBC container, polypropylene, type IBV 4

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Valve 2" for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. standard equipped in a gasket with PTFE. The valve is additionally equipped with a lever lock (in the molds of a screw) and a two-part cap. Lever in red. Valve outlet connection: male S60x6. Material: polypropylene. Sealing: PTFE. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve 2″ IBC for an IBC container, polypropylene, type IBV 5

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Valve 2" for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. standard equipped in a gasket made of Viton (FKM). The valve is additionally equipped with a lever lock (in the molds of a screw) and a two-part cap. Lever in blue. Valve outlet connection: male S60x6. Material: polypropylene. Sealing: Viton (FKM). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve 2″ IBC for an IBC container, polypropylene, type IBV 6

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Valve 2" for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. standard equipped in a gasket with PTFE. The valve is additionally equipped with a lever lock (in the molds of a screw) and a cap. lever in color yellow. Valve outlet connection: 2" NPT male. Material: polypropylene. Sealing: PTFE. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF N/C for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF/C for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Body material: brass nickel-plated. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF/V for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF PTC series PUSH-LOCK for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob with a lock PUSH-LOCK. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle type MRF OMB series COMPACT "O" used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve throttle pneumatic brass MRF/B

          All products | Pneumatic valves
          0 €
          Valve throttle type MRF/B used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle type MRF T/B used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material body: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Two-way ball valve with threads external metric, intended for high-pressure installation hydraulic. equipped in holes assembly. used in systems hydraulic as element limiting stroke actuator. Do hole in lever mounted is cable connected with piston rod or element moved actuator. Po reaching stroke valve closes supply oil for actuator. straight and economical solution used e.g. in trailers self-dumping in agriculture. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve gentle start serves for filling the system working compressed air, o action two-stage. supply signal control causes opening valve shut-off and Flow rate air through valve throttle. Po obtaining through pressure output ok. 40 ÷ 60% value pressure supply occurs switching valve and Flow rate air full cross-section od the connection inlet for output. removal signal control causes shut-off valve supply and venting the system working. valve gentle start found use in installations, in which occurs the need securing powered element actuating against sudden aeration, which can generate loads impact acting on element structural machine. excessive draw air with the connection output in during preliminary aeration the system working can disturb operation valve preventing its solid opening. Size: SY1, SY2. Connection: 1/8" BSP female ÷ 1". Supply pressure: 3 - 10 bar. additional Connection output: 1/8" BSP female for size SY1, 1/4" BSP female for size SY2, with the front and with the back.Operating temperature: od -10°C up to +50°C. Flow rate nominal: depending on size od 1250 l/min for 4800 l/min (at pressure 6.3 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydrant valve poppet with brass of coupling fire type STORZ at the outlet (coupling with aluminum or brass, gasket NBR color white) used as basic equipment cabinets hydrant (installations fire-protection, buildings residential etc.). connection for installation with thread external (od 1" for 2.1/2"). Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality two-way ball valve type SKH L/S with external thread metric, DIN 2353, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-way ball valve "L" type RK3L with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. Material: steel stainless AISI 316Ti (body, ball, stem). seal: POM or PTFE (ball), FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +200°C(FKM).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-way ball valve "L" type SK3L with thread internal NPT, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure valve needle intended for mounting in installation or mounting panel. Characterized compact design o relatively high flow. standard with stem type V (work valve close - open). each valve is factory tested. valve has special design, allowing on assembly panel without the need removal needle, thanks to this not loses warranty the manufacturer. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: inch LET-LOK®.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve needle with insert safety, steel stainless, H-285

          All products | Precision threaded fasteners
          0 €
          Valve needle with non-rotating fitting stem (PEEK), intended for mounting od side thread external in cylinders for sampling samples HSSC. insert safety screwed in in valve secures cylinder against excessive increase pressure. welded-in in an insert Plate safety bursts at specified pressure enabling outflow medium through holes in hexagonal the head insert. insert safety can be easily replaced in conditions field without needs removal valve with cylinder. valve tested pressure 120% pressure working in accordance with ISO 14246 (valve with insert safety pressure 80% pressure bursting insert). valve Meets the requirements of the directive TPED (2010/35/EU). Material: steel AISI 316 (knob - aluminum). Material plate safety: alloy 600/B168. sealing stem: O-ring NBR, ring PTFE. sealing insert: O-ring (Viton). A fitting stem: PEEK. Working pressure: up to 206 bar (at temperature 37°), dependent od temperatures. pressure bursting insert: 131 bar or 196 bar. factor flow: 0.53 Cv. Operating temperature: od -20°C up to +122°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: NPT male.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-piece medium-pressure ball valve intended for demanding applications and for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). lever valve with a lock standard in color yellow, available Levers o shape oval. Body material: AISI 316 steel (ASTM A351 CF8M, cast). Material Connections: steel AISI 316 (ASTM A351 CF3M, cast). Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: PTFE (standard); available versions with other material seals o higher parameters (modified PTFE, PTFE with powder steel stainless, UHMWPE, PEEK). sealing stem: MG1241 (PTFE with fiber glass and graphite) / PTFE (standard). pressure working (dependent od temperatures / material seal - see chart): up to 103 bar (PTFE). Temp. use (dependent od material seal - see chart): up to +186°C (PTFE). Connection: BSPT female. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-piece medium-pressure ball valve intended for demanding applications and for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). lever valve with a lock standard in color yellow, available Levers o shape oval. Body material: AISI 316 steel (ASTM A351 CF8M, cast). Material Connections: steel AISI 316 (ASTM A351 CF3M, cast). Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: PTFE (standard); available versions with other material seals o higher parameters (modified PTFE, PTFE with powder steel stainless, UHMWPE, PEEK). sealing stem: MG1241 (PTFE with fiber glass and graphite) / PTFE (standard). pressure working (dependent od temperatures / material seal - see chart): up to 103 bar (PTFE). temperature use (dependent od material seal - see chart): up to +186°C (PTFE). Connection: NPT female. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-piece medium-pressure ball valve intended for demanding applications and for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). lever valve with a lock standard in color yellow, available Levers o shape oval. Body material: AISI 316 steel (ASTM A351 CF8M, cast). Material Connections: steel AISI 316 (ASTM A351 CF3M, cast). Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: PTFE (standard); available versions with other material seals o higher parameters (modified PTFE, PTFE with powder steel stainless, UHMWPE, PEEK). sealing stem: MG1241 (PTFE with fiber glass and graphite) / PTFE (standard). pressure working (dependent od temperatures / material seal - see chart): up to 103 bar (PTFE). temperature use (dependent od material seal - see chart): up to +186°C (PTFE). Connection: inch LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-piece medium-pressure ball valve intended for demanding applications and for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). lever valve with a lock standard in color yellow, available Levers o shape oval. Body material: AISI 316 steel (ASTM A351 CF8M, cast). Material Connections: steel AISI 316 (ASTM A351 CF3M, cast). Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: PTFE (standard); available versions with other material seals o higher parameters (modified PTFE, PTFE with powder steel stainless, UHMWPE, PEEK). sealing stem: MG1241 (PTFE with fiber glass and graphite) / PTFE (standard). pressure working (dependent od temperatures / material seal - see chart): up to 103 bar (PTFE). temperature use (dependent od material seal - see chart): up to +186°C (PTFE). Connection: metric LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 7224 with full bore, intended for installation gas, in class pressure MOP 5. meets requirements the directive PED 2014/68/UE and 2009/142/WE, compliant with the standard EN 331 + A1. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSP female/BSPT male. Operating temperature: od -20°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ball valve for compressed air, intended for hammers pneumatic. Working pressure: 25 bar. Material body: steel carbon galvanized. Material the ball: brass chrome-plated. Material lever: steel carbon galvanized. sealing the ball: PTFE. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ball valve for compressed air and water. Material body: steel carbon galvanized. Material the ball: brass chrome-plated. sealing the ball: PTFE. inlet with thread internal, outlet with thread external or with cast iron couplings claw o spacing lugs 42 mm, with seal rubber (NBR) or brass. Lever with an end alloy. has venting. Working pressure: 10 bar. Operating temperature: od -20°C up to +100°C. solid, maintenance-free The design. used in compressors and equipment construction and industrial.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality high-pressure ball valve two-way closing intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). Temp. use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: NPT female. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.
        Go to Top