0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling HANSEN type HK with thread internal BSP or NPT. compliant of the standard ISO 7241-1 B. interchangeable with quick coupling ISO-B other manufacturers. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases, chemicals). Material: brass. sealing: NBR (temperature use od -40°C up to +121°C), EPDM (temperature use od -54°C up to +149°C), EPDM236 (for use with steam o temperature above +149°C). Working pressure: up to 207 bar (depending on size quick coupling). Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling full-bore Nitto Kohki series TSP CUPLA with thread external BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. especially recommended for liquids o high viscosity e.g. greases. Material: steel carbon. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN DN10.4 with fitting for hose. versatile used in industry, mainly in installations pneumatic. made in accordance with the standard Eurostandard DN10. Working pressure: 16 bar. Material: hardened steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN DN10.4 with thread external BSPT, NPT or with thread internal BSP, NPT. versatile used in industry, mainly in installations pneumatic. made in accordance with the standard Eurostandard DN10. Working pressure: 16 bar. Material: hardened steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN DN5.3 with thread external BSPT, NPT or internal BSP, NPT. versatile used in industry, mainly in installations pneumatic. Working pressure: 16 bar. Material: hardened steel, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN DN5.3 with fitting for hose. versatile used in industry, mainly in installations pneumatic. Working pressure: 16 bar. Material: hardened steel, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN DN7.6 with thread external BSPT, BSP, NPT or with thread internal BSP, NPT. versatile used in industry, mainly in installations pneumatic. Made in accordance with Eurostandard 7.2. Working pressure: 16 bar. Material: hardened steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN DN7.6 with fitting for hose. versatile used in industry, mainly in installations pneumatic. Made in accordance with Eurostandard 7.2. Working pressure: 16 bar. Material: hardened steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling measurement SNAP-CHECK production Swedish intended for measuring pressure in systems hydraulics power. socket quick coupling connected are line with pressure gauge, a plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic and equipped in valves shut-off. connection socket with a plug possible is under pressure up to 300 bar. pressure working for disconnected with socket plug is 600 bar, a minimal pressure bursting 2400 bar. pressure working for connected socket and plug is also 600 bar, whereas minimal pressure bursting to 1300 bar. precision made quick couplings, ensures tightness and reliability points measurement the system hydraulic. range connections for plugs measurement allows easy configuration connections. plugs quick couplings, supplied are standard in set with red caps with plastic. Working pressure: 600 bar. pressure switching: up to 300 bar. Material body: steel galvanized. sealing: NBR. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling QC6 compliant with the standard Standard Instrumentation, with connection LET-LOK®. QC6 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested at a pressure of 68 bar in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. plug occurs in version without valve and with valve. Material: steel AISI 316. Working pressure: 103 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling SNAP-TITE with thread internal BSP and NPTF production American is characterized unique design valve, co allows on achieving laminar flows. depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). Working pressure: up to 448 bar (depending on size quick coupling), Safety factor 2:1. Material: steel carbon, galvanized. sealing: NBR (Operating temperature: od -35°C up to +120°C), Viton (Operating temperature: od -26°C up to +204°C). Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling SNAP-TITE with thread internal BSP production American is characterized unique design valve, co allows on achieving laminar flows. depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). Working pressure: up to 155 bar (depending on size quick coupling), Safety factor 2:1. Material: brass. sealing: NBR (Operating temperature: od -35°C up to +120°C), Viton (Operating temperature: od -26°C up to +204°C). Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling with thread internal BSP, knurled, intended for cold and hot water. Material: brass. Working pressure: 16 bar. sealing: EPDM.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with a shut-off valve Nitto Kohki series SP CUPLA type A with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Material: steel chrome-plated. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with thread external BSP with a flat under wrench, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with a shut-off valve Nitto Kohki series SP CUPLA type A with thread external BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2"). Operating temperature: od -20°C up to +180°C (Viton).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling with thread external NPT, with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. is characterized high mechanical strength and resistance chemical. They are suitable for autoclaving. length L - length total. Material: polysulfone UV. sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: od -40°C up to +138°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling with thread external NPT, with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. is characterized high mechanical strength and resistance chemical. They are suitable for autoclaving. length L - length total. Material: polysulfone. sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: od -40°C up to +138°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate plug quick coupling with thread external NPT intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate plug quick coupling with thread external NPT intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate plug quick coupling with a nut on hose, intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling of a free bore series 25 DN 7.8 with thread external BSP, characterized by very high flow. Application: all fields modern technology, industry, craft - for compressed air, liquids and gases. flow capacity: 1800 l/min, Pe=6 bar, Δp=0.5 bar, air. Working pressure: 35 bar. Material: steel AISI 316Ti and AISI 303.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling o popular profile Eurostandard DN7.2 without valve, with thread external or internal BSP, intended for compressed air, gases, liquids o low and medium viscosity. plugs are interchangeable of all acc. to Eurostandard DN7.2 ÷ 7.8 other manufacturers. Working pressure: up to 25 bar. Material: steel nickel-plated. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with a shut-off valve quick coupling diagnostic, with thread internal NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable are of couplings other manufacturers. plugs quick coupling with hardened steel, standard mounted are on fixed in system hydraulic, a socket quick coupling remain connected line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. pressure working for disconnected with socket plug is 400 bar a minimal pressure bursting 1600 bar. pressure working for connected socket and plug, is also 400 bar, whereas minimal pressure bursting to 1300 bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with a shut-off valve quick coupling diagnostic, with thread external NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable are of couplings other manufacturers. plugs quick coupling with hardened steel, standard mounted are on fixed in system hydraulic, a socket quick coupling remain connected line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. pressure working for disconnected with socket plug is 400 bar a minimal pressure bursting 1600 bar. pressure working for connected socket and plug, is also 400 bar, whereas minimal pressure bursting to 1300 bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug of a free bore DN22, with a male BSP thread, hardened steel, series 2100

          All products | General-purpose low-pressure quick couplings
          0 €
          A universal plug quick coupling of a free bore o high diameter with thread external BSP, intended mainly for compressed air. flow capacity: 12000 l/min at pressure inlet Pe=6 bar, Δp=0.5 bar, air. Material: steel hardened, galvanized. Working pressure: 20 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug lever coupling ANFOR with thread external BSP for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug lever coupling ANFOR with a flange PN 10 for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A BAUER lever coupling plug with thread external BSP with wide application between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A BAUER lever coupling plug with a flange PN 10 with wide application between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A KLAUDIA lever coupling plug terminated with a flange PN10 with wide application: for unloading cement wagons, in installations wellpoint IGE (installations for dewatering soil), agricultural holdings, tankers, installations rain guns, industry and construction. Material: aluminum. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: od -25°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling plug with a flange PN 10/16 with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling plug with "tail" for hose with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling plug with connection for welding-on with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling plug with fitting rolled for hose with wide application between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel AISI 316L. Working pressure: up to 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug (part tank) coupling dry-break DRY-LINK. coupling have unique construction ensuring safe and completely Leak-free connection installation (amount medium remaining on surface valve po disconnection is immeasurable). coupling DRY LINK is characterized: small weight, small dimensions and compact design - co allows easy operating in tight spaces; ease operation through trained the operator, difficulty disconnection through accidental persons; large, unobstructed Flow rate through coupling at small a drop pressure – thanks to thin disks valves set parallel for flow; ease cleaning, smooth bore internal, small amount parts internal, no dead space – coupling DRY LINK are ideal for liquids o high viscosity and applications demanding high level purity (substances food, pharmaceutical, cosmetic, paints, adhesives); coupling DRY LINK can be also used for powders and in industry petrochemical. Material: steel AISI 316. sealing: PTFE, Viton, EPDM or chemraz®. Connections: BSP female or NPT. Working pressure: 14.3 bar for couplings DN25 and DN40, 10.3 bar for couplings DN50, 8.3 bar for couplings DN80. Vacuum: for 0.94 bar. Operating temperature: od -29°C up to +110°C (Viton, EPDM, chemraz®); od -7°C up to +110°C (PTFE).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug coupling dry-break DRY-MATE with thread internal with polypropylene. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not is intended for media gas and liquids o low the point ignition. Installed on the pressure side (tank side). The design plug based is on a valve ball, which ensures completely unobstructed Flow rate. plug supplied in set with caps with polypropylene. Material: body - polypropylene glass-fiber-reinforced, ball - PTFE, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at pressure working 5 bar). Maximum leakage: 2 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Leak detector FW-1661

          All products | Others
          0 €
          Leak detector FW-1661 in spray. Not causes corrosion, non-flammable. FW-1661 is intended for detection leaks on connections pipe, coils, sleeves, valves, etc. quickly detects leaks in lines gas, of compressed air and other gases. Do pipes of steel, copper, plastics. FW-1661 po applications creates active film, on which through lifting bubbles indicates on space leaks. FW-1661 contains special components, which allow on use detector on vertical surfaces and systems pipes. is also appropriate for pipes exhaust. Working temperature range: od -15°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very pliable and flexible, resistant to kinking hose intended for oil hydraulic, liquids based on water and other media. used in systems measurement, control and hydraulic systems brake in bicycles. On special order Layer outer micro-perforated. Inner layer: polyester. Reinforcement: single an aramid braid. Outer layer: black polyurethane. Working pressure: 625 bar or 660 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Professional, one-piece A mini valve ball shut-off production European, with body made with casting brass, with a lever straight plastic (with replaceable a plate in colors: standard red; Available yellow, blue, green, white), intended for installation industrial. It can be used for air, gases neutral, water, chemicals, products petrochemical, etc., free od contaminants solid, compliant with resistance chemical materials valve. has protection stem against blow-out. meets requirements the directive pressure PED 2014/68/UE, in the scope sound practice engineering (SEP), in accordance with art. 4 ust. 3. compliant with the directive material RoHS 2011/65/UE and the regulation REACH 1907/2006, not contains silicones. available versions these valves with seal stem made of Viton: PTFE / FKM (temperature use valve: -15°C ÷ +130°C) and on special order versions PTFE / EPDM (-40°C ÷ +130°C) and PTFE / HNBR (-30°C ÷ +130°C). pressure working these version dependent is od temperatures use. the given minimum temperature use refers to valve emptied with liquids freezing. can work on vacuum: -0.99 bar. Q – Flow rate air at an inlet pressure of 6 bar and a drop pressure Δp=1 bar, expressed in liters under pressure atmospheric ; Kv - factor flow valve expressed in units metric (Flow rate water in m 3 on hour at a drop pressure Δp=1 bar). Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: polyamide (PA 66). sealing the ball: PTFE. sealing stem: NBR. Connection: thread BSP (ISO 228-1) / thread BSP and BSPT (ISO 7-1). Operating temperature: od -20°C up to +80°C.
        Go to Top