- Home
- Cleaning and washing
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle spray 1/4" o flat angled jet with thread external BSPT for mounting e.g. with lance (connection using sockets). Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance extension ventilated with insulation thermal, intended for a high-pressure washer. length: 400 mm. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" BSP male. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AKBO hot-water gun BIG FLOW, o increased flow. Made of stainless steel, insulated trigger, EPDM rubber guards, Viton seals. Use for hot water requires particular caution. It is not intended for steam! Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 120 l/min. Operating temperature: up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral with wire steel protecting the fitting against damage mechanical with outside, co extends service life line.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter two-piece long for high-pressure equipment washing with connection metric M22x1.5. Z an O-ring po obu sides the connection. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance for foam assembled with a plug quick coupling DN 11.8, without nozzle. Connection: (inlet) plug DN11.8 / (outlet) 1/2" BSP female. available length: 22 cm, 50 cm and 60 cm. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure Water gun SG35 with lance MT8 for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet lance terminated thread internal metric M22x1.5. lance made of steel stainless or galvanized. Gun Available is also with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for mounting lance with gun for foam and spraying with male thread 1/2" BSP on outlet. Material: steel stainless. Working pressure: 24 (maximum pressure working gun with connection for lance).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, ergonomic nozzle shower color white for spraying vegetables, fruit, ryb, tables working in industry food, large kitchens and plants catering. made with polyamide (PA66) compliant with FDA, with valve internal of steel stainless. seal with EPDM. Connection: 1/2" BSP female. Working pressure: up to 8 bar. Operating temperature: up to +60°C. weight: 0.3 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: A fitting for hose 15/20 mm. Working pressure: up to 25 bar. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle Intended for washing and cleaning water, which stream adjustable is thanks to swivel the head. Flow rate can be completely closed through solid tightening the head. mechanism made with brass, cover and the gasket with rubber EPDM. Available with handle in color blue, red and white ( AK-MSHH4-BK - version without handle, 1/2" BSP male). W case use with hot water, should maintain particularly agents caution. Not It is intended for steam! Connection: 1/2" BSP female. maximum Working pressure: 16 bar. Maximum Operating temperature: +80°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for gun PROFICLEAN 416 with thread M21 x 1.5 (O-ring). standard in gun nozzle Ø 2 mm. available diameter: 2 mm, 4 mm or 5.5 mm (L = 13 mm, with thread) and 4 mm in version o length 28 mm and 58 mm. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: plug NiTO 1/2". Working pressure: up to 25 bar. Material: brass chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight Water gun AKBO made with polyamide PA66 glass-fiber-reinforced, valve and lever of steel stainless, A guard with rubber EPDM, seal with EPDM and Viton (FDA). has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Meets FDA requirements. used in industry food. Working pressure: 12 bar. Maximum Operating temperature: +50°C. weight: ok. 0.48 kg. Flow rate: 48 l/min (12 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: 3/4" BSP female. Working pressure: up to 25 bar. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: plug NiTO 1/2". Working pressure: up to 25 bar. Material: brass chrome-plated, plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: plug NiTO 3/4". Working pressure: up to 25 bar. Material: brass chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter lance/nozzle with an O-ring with NBR in set. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter lance/nozzle with thread internal po obu sides. Material: steel carbon, galvanized. Working pressure: up to 350 bar. Flow rate nominal: 60 l/min. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter cover nozzles with thread internal metric M18x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for foam in nylon cover color white with a plug quick coupling DN 11.8, compatible with guns and valves ball equipped in socket quick coupling in parts outlet. Material: steel stainless (nozzle), nylon (A guard).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for gun MULTICLEAN with thread M21 x 1.5 (O-ring po side gun). standard in gun nozzle Ø 2 mm. available diameter: 2 mm and 4 mm. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat with plastic Intended for foaming at low pressure - 2.5 bar (best effect obtained at 3.5 ÷ 4 bar). can be also used for spraying and washing cleaned surface. Connection: 1/4" BSP female. Material nozzle: plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat with plastic Intended for foaming at low pressure - 2.5 bar (best effect obtained at 3.5 ÷ 4 bar). can be also used for spraying and washing cleaned surface. Connection: plug quick coupling DN 11.8 (steel stainless). Material nozzle: plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle rotary RM for unclogging sewers without hole centric, additional 2 holes side. Connection: 1/4" BSP female. Material: steel stainless (body), brass (rotor). Working pressure: up to 150 bar. Diameter: 19 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzles dosing for system NitoClean, MiniMix, MinSpray and similar equipment. W set found 5 pcs available in various colors.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead HYPERJET PLUS for lances. Material: brass, steel stainless and plastic plastic. Working pressure: up to 250 bar. Operating temperature: up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead rotary. Material: brass, steel stainless and plastic plastic. Working pressure: up to 255 bar. Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead rotary MH o the highest resistance, Intended for lances type MT1, MT2, MT3 and MT6. Material: steel stainless. Working pressure: up to 500 bar. Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket NiTO quick coupling high-pressure for water with thread external metric. Available version with thread long. Material: brass chrome-plated. Working pressure: 180 bar. Operating temperature: +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket MH-24 quick coupling with thread internal BSP for lances, guns and hoses high-pressure. Material: steel stainless. Working pressure: 400 bar. Operating temperature: +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° with thread internal for washers high-pressure. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal for washers high-pressure. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting rotational AK with thread external tapered BSPT without flange. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, rotation of the gun is required. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting rotational AK with thread external tapered BSPT without spring anti-kink. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, rotation of the gun is required. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting AK with thread internal BSP of spring anti-kink o length 200 mm. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, bending of the hose is required. spring constitutes additional protection hose. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting AK with thread external BSP of spring anti-kink o length 200 mm. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, bending of the hose is required. spring constitutes additional protection hose. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance for washing chassis. thanks to its length and bent the tip ideal is suitable for washing chassis as and other hard reachable places. part outlet lance terminated is thread internal 1/4" NPT. Working pressure: up to 280 bar. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) M22x1.5 female / (outlet) M18x1.5 male. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT3, intended for a high-pressure washer. Connection: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.



















































