0

Our products

    Filters
      Product categories
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -54 — -10

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 60 — 982

      Material
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard spiral PROTECTOR Intended for securing hoses (cables) against abrasion, impacts and crushing. serves also for holding group hoses (cables) in the molds beam. improves visibility covered hoses. resistant to acids, oils, solvents and radiation UV. Dla diameters external od 75 mm for 140 mm sections have hole facilitating connection in greater length (not refers to coils). easy in installation both against, as and po mounting hose. Available in color black, yellow and red. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard hoses, cables and lin in the molds sleeve. resistant to flame, abrasion, oils and most industrial chemicals. used in steelworks, smelters metals and glass, foundries - splashes molten metal, glass not adhere for cover. used also for cover installation steam and hot oil - protects against burns and losses energy. very good resistance to moisture makes, that can be used also on outside. on request Available in other colors. Available on request version VCO with flame-retardant hook-and-loop (velcro) in the scope diameters od 22 mm for 140 mm, in lengths for 30 meters. assembly hook-and-loop causes, that A guard can be easily installed without disconnecting lines, cables czy pipes. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard of specially cleaned through heating and saturation special substances acrylic braid with fibre glass. Not has loose, falling out fibres, well arranges and is relatively resistant to abrasion. can it expand and shrink o 25% adjusting for desired diameter. Material: fiber glass. Operating temperature: up to +538°C (momentarily up to +705°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          MINE SPIRAL+ to antistatic version cover PROTECTOR with addition components reducing flammability and possibility ignition, especially in use mining and machines used in mines. has approval MSHA IC-271 issued through Mine Safety and Health Administration as product flame-retardant, approved for use in mines. Class flammability acc. to UL 94 V-0 (standard safety flammability materials with plastics). Material: brown-gray polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard in the molds sleeve. strong, chemical resistant (except acid hydrofluoric, phosphoric and strong bases). completely resistant to flame. high content Clean silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. has properties electrical-insulating. Not emits smoke ani vapours. Wall thickness to ok. 1.65 mm. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery used as A guard for cooling lines electric in industry metallurgical. Layer inner resistant to hot water cooling, water process, inhibitors corrosion and water with fluids non-freezing. Layer inner and outer non-conductive. resistance electrical R > 10 10 Ω/m, resistance to breakdown > 6 kV/mm. Layer outer resistant to aging, ozone, and heat radiation od electric furnaces curved, self-extinguishing (compliant with the standard ASTM C-542). radius bends specified for pressure 1 bar. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black rubber CR. Working pressure: 10 bar. pressure bursting: 30 bar. Operating temperature: od -40°C up to +90°C (momentarily +110°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Non-adhesive tape PYROTAPE Intended is for wrapping ready lines and installation without ich disconnecting, in replacement cover PYROJACKET, a also for jej sealing on ends lines and objects o irregular shapes. resistant to splashes molten metal (not adhere for cover), flame, moisture and abrasion. wall thickness nominal tape to 3.73 mm. at mounting recommended is overlap 30-50% and use tape PYROSIL or straps of steel stainless. tape not should be used for lines dynamically bent. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard spiral made with wire steel Intended for securing hoses (cables) against abrasion, bending and crushing. standard length 5 m. Material: steel spring galvanized. gap between patterns: 5 mm (for wall thickness wire 1.6 mm), 6 mm (for wall thickness wire 2 mm), 10 mm (for wall thickness wire 3 mm).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A guard spiral SPIRALINA

          All products | Covers
          0 €
          A guard spiral Intended for securing hoses (cables) against abrasion and crushing. serves also for holding group hoses (cables) in the molds beam. resistant to conditions atmospheric, radiation UV, ozone, fire (in accordance with UL94VO), oil, oil drive, water. SPIRALINA FLEX in ratio for ordinary cover SPIRALINA has thinner wall and is more flexible. non-conductive - conductivity surface 10 10 Ω. Material: hard PVC (has memory shape). length standard: 20 m. Operating temperature: od -10°C up to +60°C (momentarily up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard reflective made with fabric PYREFLECT BLANKET double stitched on required diameter. reflects above 90% energy heat radiation. used in cases, when radiating heat (radiation infrared) must be stopped and reflected. resistant to abrasion, water and oil. good resistance to flame. On request Available in version VCO with hook-and-loop (velcro) in the scope diameters od 19 mm for 305 mm. assembly hook-and-loop causes, that A guard can be easily installed without disconnecting lines, cables czy pipes. Material: fabric aramid, foil aluminum. Operating temperature: up to +343°C (momentarily up to +538°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible a steel braid, used for securing hoses against damage mechanical, abrasion and temperature. ensures also increase ich strength at elevated pressure. can be clamped a clamp crimp or ferrules. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Self-vulcanizing tape silicone PYROSIL used for sealing cover PYROJACKET and tape PYROTAPE. Not has layer adhesive, ale overlapping on each other or on PYROJACKET or PYROTAPE vulcanizes in several seconds. resistant to radiating heat, moisture and vibration. Due to very good strength dielectric, is suitable on insulator electric. at mounting Recommended is overlap 50% and clean, dry surface. Not is recommended for contact with flame and splashes molten metal. Material: silicone in color rust. Operating temperature: up to +246°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard SAFE SLEEVE with dense fabric Intended for protection hoses or bundles lines hydraulic and pneumatic. excellent resistance to abrasion (tested acc. to SFS-EN ISO 12947-3), resistant chemical and on radiation UV, low conductivity electrical. A guard protects people located in the vicinity bursting hose. meets standards EN ISO 3457 and EN 12999. attribute width tape specifies width cover in state flat. Material: black polypropylene (without printing). Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong fabric glass coated on both sides rust silicone, o basis weight 1085 g/m 2. used primarily as A guard welding, a also in applications on outside and in industry offshore, Due to resistance to moisture and light solar. Material: fabric glass coated silicone. Operating temperature: od -54°C up to +260°C (momentarily up to +1185°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          ASTA version cover PROTECTOR completely antistatic, Intended for use under earth and in other special environment, which require conductive surface. compliant with the standard EN ISO 80079-36:2016, which is connected with the directive ATEX for equipment non-electrical in spaces hazardous explosion. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Special version cover PYROJACKET Intended mainly for aviation (made in accordance with the standard SAE Aerospace Standard 1072E), industry railway (compliant with DIN EN 45545-2:2013-08) and marine. additional certified is in diameters 13 mm ÷ 127 mm through DNV for temperatures +800°C through 30 minutes (ISO 15540) and through MSHA (for use in mines). Available on request version VCO with flame-retardant hook-and-loop (velcro) in the scope diameters od 22 mm for 140 mm, in lengths for 30 meters. assembly hook-and-loop causes, that A guard can be easily installed without disconnecting lines, cables czy pipes. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong A guard equipped in a fastener Velcro® - „hook-and-loop” along the entire section, easy for installation on bundles lines and for removal. fabric with which made is SAFE WRAP is characterized excellent strength on stretching (EN ISO 13934-1) and is in 100% waterproof (EN 24920). SAFE WRAP meets also requirements standard ISO 3457 (carried out test porosity). is characterized high resistance on abrasion. Available in other diameters internal. Material: black fabric polyamide coated with outside black polyurethane. Operating temperature: od -20°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard reflective in the molds rolls or shorter sheets, o basis weight 678 g/m 2, designed for reflecting above 90% energy heat radiation. used in cases, when radiating heat (radiation infrared) must be stopped and reflected. resistant to abrasion, water and oil. good resistance to flame. A guard Available o wide roll 1016 mm and 1525 mm. Material: fabric aramid, foil aluminum. Operating temperature: up to +343°C (momentarily up to +538°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Resistant to rupture and twisting, A guard heat-shrink FEP for use many branches industry. long service life use measured in years, even during use with high pressures. smooth surface prevents adhesion contaminants. excellent strength temperature. widely used in industry (e.g. as A guard rollers at production paper and in printing houses). Material: fluoro-ethyl-propylene (FEP). Maximum Operating temperature: +204°C. temperature shrinkage: od +121°C up to +204°C (shrinkage in the scope 20 ÷ 25%). Hardness: 53° Shore (A). Density: 2.15 g/cm 3.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard spiral Intended for securing hoses (cables) against abrasion, impacts and crushing. serves also for holding group hoses (cables) in the molds beam. improves visibility covered hoses. resistant to acids, oils, solvents and radiation UV. ABRA to two-color version cover PROTECTOR with tzw. an index wear. Z outside is black, a od the inside yellow. ABRA helps identify space, which require more detailed observation - when only black Layer wears through revealing yellow color, will to signal, that spiral can already soon require replacement on new. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal, thick A guard with fibre glass. excellent properties insulation thermal and electrical. as A guard hoses and cables can be used independently or e.g. under cover PYROJACKET or SILICAFLEX, to significantly increase effect insulating. occurs in two thicknesses wall: 3.2 mm - TSB and 1.6 mm - TSBL. Material: fiber glass. Operating temperature: up to +538°C (momentarily up to +705°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard in the molds rolls or shorter sheets designed for protection hoses, cables other element against splashes metals, intense radiating heat, flames and splashes welding. high content Clean silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. Not emits fumes ani vapours. occurs in three versions, in rolls o wide 915 mm and 1525 mm: SILICAFLEX BLANKET 18 – o wall thickness 0.76 mm, SILICAFLEX BLANKET 32 – o wall thickness 1.25 mm, SILICAFLEX BLANKET 36 – o wall thickness 1.27 mm. Available is also special version SILICAFLEX BLANKET coated aluminum coating reflective (FQSFB36-36AL). aluminum SILICAFLEX BLANKET except for features standard cover SILICAFLEX and reflecting intensely radiating heat, has also better strength on tearing and on abrasion, a also better resistance to water and oils. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose cover CABLE ISOL®

          All products | Covers
          0 €
          Thin-walled hose cover reinforced vulcanized a braid synthetic. Material layer outer: black rubber SBR. Operating temperature: od -30°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard GT35 made with very dense fabric polyester. Intended for protection single hoses or bundles lines hydraulic and pneumatic. has good resistance mechanical and on oils and products organic. protects hose and secures the operator against spray oil in case rupture hose. Material: polyester. Operating temperature: +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal tape coated single-acting adhesive binding at jej tensioning. designed for protection hoses, cables and pipes against intense radiating heat and flames. wall thickness tape to ok. 0.76 mm. at mounting recommended is overlap 50%. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard SAFE SLEEVE MSHA with dense fabric Intended for protection hoses or bundles lines hydraulic and pneumatic. excellent resistance to abrasion (tested acc. to SFS-EN ISO 12947-3), resistant chemical and on radiation UV, low conductivity electrical. A guard protects people located in the vicinity bursting hose. meets standards EN ISO 3457 and EN 12999. product flame-retardant, approved for use in mines. attribute width tape specifies width cover in state flat. Material: black polyester (with printing). Operating temperature: od -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible A guard made with tape cut with tubes PE. Intended is for protection cables electric and hoses and connecting ich in beam. resistant to acids, oils, solvents and radiation UV. Material: black polyethylene (PE). Operating temperature: od -30°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Aluminum sleeve for fastening covers SAFE SLEEVE. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: aluminum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Clamp with dense fabric, Intended for connecting bundles lines. versions: with a fastener Velcro® - on "hook-and-loop" (STRD), with a fastener Velcro® - on "hook-and-loop" with an eyelet mounting (STRDR) and with a clip of steel stainless (STFLL). inscription SAFE-STRIP is embroidered. Material: black polypropylene. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          GLOW to photoluminescent version cover PROTECTOR Intended for securing hoses (cables) or bundles hoses against abrasion, impacts and crushing. ensures visibility hoses even in conditions weak lighting. glows over 12 hours and can be charged through any source light. Not contains harmful materials and halogen. resistant to radiation UV. color: yellow with photoluminescent edges. Material: polyethylene (HDPE) + compound photoluminescent. Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard GPVC Intended is for protection single hoses or bundles lines hydraulic and pneumatic. protects hose and secures the operator against spray oil in case rupture hose. Material: PVC. Operating temperature: +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thick, heavy fabric glass coated single-acting thick layer silicone, o basis weight 3260 g/m 2. has high properties insulating and excellent resistance to flame and on abrasion. resistant to water, moisture and oils hydraulic. used in steelworks, smelters metals and glass, foundries - splashes molten metal, glass not adhere for cover. Material: fabric glass coated silicone. Operating temperature: od -54°C up to +260°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very thick A guard hoses, cables and pipes in the molds sleeve. resistant to flame, abrasion and oils. used also for cover installation steam and hot oil - protects against burns and losses energy. use tej cover can reduced external temperature hose for steam with +194°C up to +54°C. wall thickness nominal wall: 5.08 mm. very good resistance to moisture, makes that can be used also on outside. Material: fiber glass coated silicone in color blue. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes; up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard spiral made with tape steel Intended for securing hoses (cables) against abrasion, bending and crushing. gap between coils: 3 mm. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          ECO to ecological version cover PROTECTOR Intended for securing hoses (cables) or bundles hoses against abrasion, impacts and crushing. manufactured entirely with polyethylene originating with recycling. A guard spiral ECO is suitable for all companies, which want increase sustainable development and reduce its footprint carbon through choice materials originating with recycling. color black. Material: polyethylene (HDPE) with recycling. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Resistant thermally sealant in the molds semi-liquid paste binding for state non-sticky within 10 ÷ 15 minutes, a completely within 18 hours. supplied in tubes 310 ml for a dispenser. should go Use in well ventilated rooms and avoid contact with gasoline czy oil drive. Material: blend amorphous silica, polydimethylsiloxane (type silicone), oxide iron and catalyst. Operating temperature: od -59°C up to +287°C (momentarily up to +538°C).
        • Placeholder
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose cover COOLCABLE®

          All products | Covers
          0 €
          Thin-walled A guard insulating Intended for cooling lines electric in systems automatic welding. resistance electrical 1x10 8 Ω/m. Material layer internal: black rubber SBR/NR. Material layer outer: black rubber SBR/NR. Reinforcement: textile braid. Working pressure: 10 bar. Operating temperature: od -30°C up to +80°C.
        Go to Top