Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BANJO straight double type DRS, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting BANJO with thread external BSP type AI 13550 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass. gasket: NBR. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type SF with seal flat, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. use a nut type UM (EC- 105…). Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight with thread external BSP with gasket flat type AI 13485 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass. gasket: NBR. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular straight type RST, without a nut, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector screw-together for hoses NiTO type A with thread BSP with seal flat. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting - Tee "T" with thread external BSPT type AI 13220 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hoses. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting tubular straight with fitting for hose type AI 13540 Intended for connecting pipes copper with a hose. range diameters external joined pipes od 6 for 14 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt for BANJO type DHS with thread metric, with two holes. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type RDST with thread external metric, reducing, sealing 60° cone. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector (A cross) type AI 13510 intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 14 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector "T" for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat for fittings NITO with thread internal type A.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BANJO type DRL double for soldering. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter type DST with thread external metric, sealing 60° cone. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector Tee "Y" for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector angled 90° for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee type TSM intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BANJO angled 90° type RBR, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose, type NA with thread external BSPT and metric. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose straight with a male BSP thread, type EM, found wide use in in laboratories, medicine, industry pharmaceutical, chemical and food. The design allows multiple assembly without the need use tools. Intended is for flexible smooth unreinforced hoses, PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone and hoses TYGON ®. Material: polypropylene, PVDF. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting tubular angled 90° type RBS, without a nut, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter BANJO type R-G with thread external metric or BSP, sealing 60° cone. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTapered A fitting with "tail" for hoses pneumatic, without flange securing. Material: cast iron galvanized. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut DIN 8537/20033 with thread Rd Intended for tapered fittings with "tail" for hose. Material: cast iron galvanized. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter DIN 20037 with thread external BSP and Rd, for use in installation pneumatic. Material: steel/cast iron galvanized. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter parallel with round holes with thread BSPT for use at hoses for drawing water, sewage, emptying tanks etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter parallel with round holes with "tail" for hose for use at hoses for drawing water, sewage, emptying tanks etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter BANJO type R-G-L with thread external metric, sealing 24° cone. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for fittings for pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide) with thread external BSP, with gasket. standard: EN 1254-2. Material: brass. gasket: NBR. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross threaded with threads internal BSP, series 3F type EM. found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross threaded with threads external BSP, series 3F type EM. found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter tapered with holes on the top with thread BSPT for use at hoses for drawing water, sewage, emptying tanks etc. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90º with thread internal BSP, series 3F type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90º with thread external and internal BSP, series 3F type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple angled 90º with thread external BSP, series 3F type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange fixed PN16 type CNWF of carbon steel with "tail" for hose. intended for hoses rubber and plastic hoses industrial. assembly using bands or straps clamping. Material: steel carbon, galvanized.
